$645,000
427.2 miles away - CHESAPEAKE, VA
CUMMINS ENGINE, DUMP HOPPER UNLOADING CONVEYOR CAPACITY-1000 TPH.
$529,900
418.7 miles away - EAST SYRACUSE, NY
600HP 4-TRACK TIER 4F CUMMINS OSX-15 ENGINE | 24V LED NIGHT LIGHT PACKAGE | GUARDIAN REMOTE TELEMATICS | ACE GRADE AND SLOPE AUTOMATION W/ AUTOCUT | PREWIRED FOR ACE AVERAGING SKI | 6'7" (79") KENNAMETAL SINGLE HIT DRUM W/ 5/8" SPACING | CUTTER HOUSING
$489,000
430.5 miles away - Columbia, SC
MATERIAL TRANSFER VEHICLE, TOO MANY FEATURES TO LIST!
$489,000
359.4 miles away - Greenville, SC
CUMMINS ENGINE, GRIUND CREW CONTROL PANEL
$295,000
835.8 miles away - BARTOW, FL
Cummins QSL9 450hp @ 2100 rpm diesel engine, Tier 4f, Engine Load control, 3 speed hydrostatic drive 2-wheel rear drive with differential lock, Front steering, 6 mph maximum travel speed, 300 fpm maximum working speed, Hydraulically controlled cut depth, CAN-based electronics, 24 Volt electrical system Four heavy duty single piece wheels prevent rim slippage and tire failure, Tires - 23.5-25 (Rear) 15.5-25 (Front), Variable geometry cutter housing with hinging front and rear doors to control material Seat and console swivel 90 degrees for operation of machine in either direction, Infinitely variable cutter drum speed - from 80 to 160 rpm, 80 gallon (302 L) hydraulic tank, 170-gallon (643 L) fuel capacity CAN Bus controls, Variable speed, demand driven cooling fan, ROPS/FOPS, 2 Work lights Tire ballasts, 78" (2.0 m) Cutter Housing - CHX2-78, 6'6" (78”) (2.0 m) width cutter drum, Bolt-on cutter assembly with hydraulic drive, 50" Diameter Drums (Provide 18" Depth of Cut), 0.8" Spaced Kennametal welded drum
$290,000
835.8 miles away - BARTOW, FL
Cummins QSL9 450hp @ 2100 rpm diesel engine, Tier 4f, Engine Load control, 3 speed hydrostatic drive 2-wheel rear drive with differential lock, Front steering, 6 mph maximum travel speed, 300 fpm maximum working speed, Hydraulically controlled cut depth, CAN-based electronics, 24 Volt electrical system Four heavy duty single piece wheels prevent rim slippage and tire failure, Tires - 23.5-25 (Rear) 15.5-25 (Front), Variable geometry cutter housing with hinging front and rear doors to control material Seat and console swivel 90 degrees for operation of machine in either direction, Infinitely variable cutter drum speed - from 80 to 160 rpm, 80 gallon (302 L) hydraulic tank, 170-gallon (643 L) fuel capacity CAN Bus controls, Variable speed, demand driven cooling fan, ROPS/FOPS, 2 Work lights Tire ballasts, 78" (2.0 m) Cutter Housing - CHX2-78, 6'6" (78”) (2.0 m) width cutter drum, Bolt-on cutter assembly with hydraulic drive, 50" Diameter Drums (Provide 18" Depth of Cut), 0.8" Spaced Kennametal welded drum
$279,000
418.7 miles away - EAST SYRACUSE, NY
320 HP CUMMINS, (3) 40", 36", 24" DRUMS, GUARDIAN TELEMATICS, CAPABLE OF 12" CUTTING DEPTH
$199,900
418.7 miles away - EAST SYRACUSE, NY
CUMMINS QSB 6.7, 230HP| CARLSON EZ-4 SCREED| FRONT MOUNT EXT| (2) 12" AUGER EXT, (2) 18" SCREED EXT| (2) 18" BERM BUILDERS| MOBA MATIC II GRADE/SLOPE AUTOMATION| MOBA SONIC AVG SKI | 39,220LBS WEIGHT | MAX PAVING WIDTH 30' |
$189,000
1131.4 miles away - SAN ANTONIO, TX
Cab with A/C and Heat, Cut width: 100", Max Cut Depth: 16", 450HP Cummins® QSX-15. Travel speed: 0-6 mph, High-flotation 620/75 R26 tires, Joy stick-controlled steering, Four steering modes: coordinated steer, crab steer, front steer only, rear steer only, Cab can offset to the right side of the machine, Fuel Tank - 240 gal, Machine weighs: 60,000lbs
$159,900
418.7 miles away - EAST SYRACUSE, NY
OPERATING WEIGHT 39220 LBS | STD PAVING WIDTH 10' - 19'6" | MAX PAVING WIDTH 30' | CUMMING 230HP |
$119,500
566.4 miles away - DES MOINES, IA
Screed Easy IV serial # 1019
$110,000
158.0 miles away - PLEASUREVILLE, KY
Engine : Cummins QSX15 755 HP Condition : Good Cab, heat/AC ,4 Wheel steering, Hydraulic raise and lower, 100" cutting drum, Hydraulic hood raise and lower. Manual grease tank. Engine : Reman at 4,655 hrs
$75,000
348.5 miles away - MANHEIM, PA
auxiliarylighting: Yes, depthcontrol: Yes, dischargeconveyor: Yes, foldingconveyor: No, Hours: 1249, New: Used, Operatingdepth (inches): 13, Operatingwidth (inches): 84, polytrackpads: Yes, Watercapacity (gallons): 700, watersystem: Yes
$55,000
314.7 miles away - Mills River, NC
230 HP CUMMINS ENGINE, STANDARD PAVING WIDTH IS 10-19' 6" AND MAXIMUM PAVING WIDTH IS 30 FT.
$45,000
348.5 miles away - MANHEIM, PA
depthcontrol: Yes, dischargeconveyor: Yes, foldingconveyor: No, Fuelcapacity (gallons): 290, Horse Power: 630, Hours: 7866, New: Used, Operatingdepth (inches): 13, Operatingwidth (inches): 96, polytrackpads: Yes, Watercapacity (gallons): 600, watersystem: Yes
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
OPERATING WEIGHT 32500 LBS | STANDARD PAVING WIDTH 8' - 15' 6" | MAX PAVING SPEED 210FT/MIN | MAX PAVING WIDTH 24' |
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
310 HP CUMMINS ENGINE | 77,190 LB OPERATING WEIGHT | 1,000 TPH | NIGHT WORK LIGHTS | ADAPTIVE CRUISE CONTROL | C2 LEVEL INDICATOR | FOUR WHEEL STEER | AUTO CHAIN SPRAY |
$49,000
856.3 miles away - OKLAHOMA CITY, OK
ROADTEC RP190E WHEEL ASPHALT PAVER, open dual operator platform, 10' screed Kirby-Smith will have the machine cleaned, serviced and ready to work! As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$39,500
856.3 miles away - OKLAHOMA CITY, OK
ROADTEC RP190E WHEEL ASPHALT PAVER, open dual operator platform, 10' screed Kirby-Smith will have the machine cleaned, serviced and ready to work! As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
174HP CUMMINS T4F | HYD SCREED BOOST PACKAGE | 12"X3/4" AUGER EXTS | REV DIST AUGERS | ENVIRO RELEASE SPRAY DOWN SYS | (2) HEATED 12" BOLT ON SCREED EXTS | ROAD LIGHT PACKAGE | 8" HYD TUNNEL EXTS | 11.5 TOB CAPACITY/ SELF-DUMPING HOPPER |
What type of heavy construction equipment does Fastline provide?
We have a large catalog of new and used construction equipment for sale by the sellers, who we partner with.
Small Construction Equipment For Sale
Have a small scale construction project and in need of equipment to complete it? Fastline has you covered with our selection of mini excavators, skid steers, and tractor/backhoe loaders used for tasks such as lifting, digging, hauling materials, and grading.
Heavy Construction Equipment For Sale
For larger construction projects we offer heavy equipment such as bulldozers, dump trucks, wheel loaders, and cranes which are used for moving and lifting heavy objects, grading land, digging and moving materials.
Along with small and large scale construction equipment, Fastline provides many options for construction equipment attachments as well.
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.