Primary Contact
Equipment Listings
$7,000
1131.4 miles away - SAN ANTONIO, TX
Hydraulic quick coupler, Fits to Volvo Wheel loaders: L180, L180G, L180H and maybe others, Weighs 1100lbs
$7,500
1131.4 miles away - SAN ANTONIO, TX
750lb Class hammer / breaker, With skid steer mount and hoses, Weight with mount: 1050lbs, Tool Diameter: 2.75”, Flow Range: 10-22 GPM, Impact Rate: 500 - 1,200 BPM
$30,000
1131.4 miles away - SAN ANTONIO, TX
Max 30” deep cut, Currently set for 6” wide cut, Hydraulic side shift, Weighs 4350lbs, Fits to Ditch Witch RT55, RT80, RT115, Could also be modified to fit Vermeer RTX750, Was previously mounted on 2016 Ditch Witch RT80
$5,900
1131.4 miles away - SAN ANTONIO, TX
Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100”wide, Attachment weighs: 2,300lbs, Fits to Cat Wheel loaders with Balderson Q/C: 926G, 928G, 938G, 950G and more.
$17,000
1131.4 miles away - SAN ANTONIO, TX
Bit diameter: 32”, 20 – 42 GPM, 4250 max PSI, Low RPM auger bit (7-16 RPM) leads to easy clean-up, No high-speed flying debris for a safer work zone, The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass, Larger diameter stumps are processed by making additional passes, A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge, Weighs: 1,368lbs, Fits to skid steers, Available new for $26,500, Used sale price…..$18,500
$65,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 1300
High Flow, 2 speed, Power quick coupler, Auxiliary High Flow 40.4 gpm, Auxiliary 2nd Circuit 23.2 gpm, Hydraulic Pressure 3,481 psi, Fuel Tank : 32 gal, 111HP Kubota Turbo Diesel, Machine weighs 13,200lbs
$157,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 4000
Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 11’ wide blade, 125HP John Deere Turbo diesel, 24” wide track pads, (30” LGP track pads can be installed on this machine), 75 Gallon fuel tank, 3,100 hours, Weights 35,000lbs,
$1,450
1131.4 miles away - SAN ANTONIO, TX
Measures 56" Long, Tapers to 12" Wide @ Tip, Three Replaceable Cast Teeth, Curved Bottom for Better Leverage, 4" Square Tube, Formed Bottom w/ 1" x 8" Cutting Edge, Weight: 443lbs.
$7,500
1131.4 miles away - SAN ANTONIO, TX
750lb Class hammer / breaker With skid steer mount and hoses, Weight with mount: 1050lbs Tool Diameter: 2.75” Flow Range: 10-22 GPM Impact Rate: 500 - 1,200 BPM
$8,800
1131.4 miles away - SAN ANTONIO, TX
Severe Duty Rock Grapples, 3/4″Top Tines, Covered Cylinders & Hoses, 1-1/4″ Pivot Pins with Grease fittings, 3″ Spacing Between Tines 72" model.........................................$8,800.00 78" model.........................................$9,200.00 84" model.........................................$9,400.00
$160,000
1131.4 miles away - SAN ANTONIO, TX
New 2,500 Gallon Niece Water Tank installed in 2022, Two Rear Sprayers Left and right side Sprayers Rear gravity dump pipe/dispenser, Left and right side Sprayers Joystick Controlled Top Mounted Water Cannon Rear hose real, 130HP Cummins 4.5 turbo diesel, Auto trans with 6 forward and 3 reverse gears, 24mph Max Travel Speed 36 Gal fuel tank 800/45-30.5 flotation Tires 9’7” wide 10’ 6” tall Machine weight empty: 21,500lbs
$49,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 1350
6000lbs cap, 36’ max lift height, Auxiliary hydraulics, 60” long fork tines 60” wide carriage, Solid cushion tires, 74HP Cummins Turbo Diesel, No DEF fluid, Machine weighs 24,000lbs
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|
Show More
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.