$175,000
359.1 miles away - FARMINGTON, NY
1.5” screen, fits Cat 320-325, or similar 200 class machine. 80mm pins, 12.75” spread, 20.5” center to center NOTE: Available to Rent.
$68,000
119.0 miles away - VERONA, KY
$59,000
119.0 miles away - VERONA, KY
$52,482
854.5 miles away - OKLAHOMA CITY, OK
Okada ORV5000H hydraulic breaker for 210P G excavators (and comparable competitive models). Click either'View Document" or "Inspection Document" for specifications. 5000 Ft Lb Impact Energy Class Hydraulic Breaker Moil Point Mount for 210P G Excavators **Stock Photo**
$48,000
1131.4 miles away - SAN ANTONIO, TX
Energy Class : 7,500lb, Actual weight: 6000lbs, 6.1” Tool / chisel, Impact Frequency: 230-400 bpm, Stick pin: 100mm, Link pin: 100mm, Space between pin bosses: 16.50”, Center to center of pins: 23 1/8”, Rated Flow: 63 GPM to 72 GPM, Minimum Operating Pressure: 2275 PSI to 2700 PSI, Fits to John Deere 350G excavators and other excavators with 100mm pins.
$47,273
854.5 miles away - OKLAHOMA CITY, OK
Okada 5,000 FT-LB class hydraulic hammer for John Deere/Hitachi 200, 210 and 225 excavators. Okada 5000 Ft-Lb Hydraulic Hammer Mounting for John Deere/Hitachi 200, 210, 225 Excavators Chisel Tool 47-63 GPM Oil Flow Coupler Mfr: Okada
$47,250
419.7 miles away - NORTH SYRACUSE, NY
INCLUDES SET OF PINS
$45,500
119.0 miles away - VERONA, KY
$39,194
854.5 miles away - OKLAHOMA CITY, OK
Used Okada 4000 ft-lb class hydraulic hammer for John Deere and Hitachi 160 excavators from our well-maintained rental fleet. Okada 4,000 ft-lb Impact Energy Class Chisel Tool 32-42 GPM Oil Flow **Stock Photo** Coupler Mfr: Okada
$37,000
1131.4 miles away - SAN ANTONIO, TX
Energy Class : 5,000lb, Actual weight: 4,700lbs, 5.7” Tool / chisel, Stick pin: 80mm, Link pin: 80mm, Space between pin bosses: 13”, Center to center of pins: 18.25”, Fits to John Deere 200, 210G, Hitachi EX210, EX220 and other excavators with 80mm pin size,
$32,300
119.0 miles away - VERONA, KY
$26,500
958.8 miles away - HILLSBORO, TX
Okada Hydraulic hammer 105"x33"x29", fully operational, inspected by Okada shop
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
958.8 miles away
$19,968
402.0 miles away - BINGHAMTON, NY
$19,950
958.8 miles away - HILLSBORO, TX
Okada TMB-70, Bucket, screening bucket 98"x75"x 60", fully operational, inspected by OKADA shop
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
958.8 miles away
$18,000
560.0 miles away - BONDURANT, IA
TOP MOUNT FOR SK210LC-10 DEAD PINS Hours: 9275
$16,982
854.5 miles away - OKLAHOMA CITY, OK
New Okada ORV1500H hydraulic breaker for John Deere & Hitachi 75 & 85 excavators as well as many comparable competitive models. Click either "View Document" or "Inspection Document" for specifications. Bolt Kit 3.5 / 303B Base Plate Moil Point Tool HOSE ASSY / 12 x 96OAL 12JSWx 12MP WP3K Chisel Paste Tube 14oz N2 Gas Charge Kit w/ Case **Stock Photo**
$16,982
854.5 miles away - OKLAHOMA CITY, OK
New Okada ORV1500H hammer fitting a John Deere 320 P backhoe-loader and many comparable competitive models. Click either "View Document" or "Inspection Document" for additional information & specifications. 320 P Backhoe Mounting Whip Hoses N2 Gas Charge Kit Moil Point Tool **Stock Photo**
$15,750
2043.1 miles away - STOCKTON, CA
22,000lbs impact force, 2100 cpm, hydraulic flow of 50gpm, 2,200psi, bottom plate measures 34X43in.
$12,500
592.2 miles away - PHILLIPSTON, MA
screening bucket for 18-25 ton size class excavator, 1" screen, 52" wide over side cutters, 14 1/2" spread, 21" center to center, 80 mm pins
$11,500
958.8 miles away - HILLSBORO, TX
2000 ft-lbs class hydraulic breaker, 71"x33"x31", fully operational, inspected by Okada shop
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
958.8 miles away
$10,500
1131.4 miles away - SAN ANTONIO, TX
850lb Class hammer / breaker, With skid steer mount and hoses, Weight with mount: 1050lbs, Tool Diameter: 2.95”, Flow Range: 14-20 GPM, Impact Rate: 380-900 BPM
$10,500
1131.4 miles away - SAN ANTONIO, TX
850lb Class hammer / breaker, With skid steer mount and hoses, Weight with mount: 1050lbs, Tool Diameter: 2.95”, Flow Range: 14-20 GPM, Impact Rate: 380-900 BPM
$9,000
1131.4 miles away - SAN ANTONIO, TX
28” wide plate, 80mm pins, 12” between pin bosses, 18.5” center to center on pins, Fit to excavators with 80mm pins. Attachment weight 2150lbs
$8,500
560.0 miles away - BONDURANT, IA
WAIN ROY COUPLER MOUNT Hours: 58
$7,900
854.5 miles away - OKLAHOMA CITY, OK
New rebuilt Okada ORV1500H hydraulic breaker for John Deere & Hitachi 75 & 85 excavators as well as many competitive models. Click either "View Document" or "Inspection Document" for specifications. Bolt Kit 3.5 / 303B Base Plate Moil Point Tool HOSE ASSY / 12 x 96OAL 12JSWx 12MP WP3K Chisel Paste Tube 14oz N2 Gas Charge Kit w/ Case
$7,000
714.0 miles away - SERGEANT BLF, IA
WAIN ROY STYLE COUPLER FITS SK35SR/55SRX Hours: 3
$6,250
958.8 miles away - HILLSBORO, TX
Okada hydraulic hammer 72"x36"x27", fully operational, inspected by Okada shop
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
958.8 miles away
$5,500
359.1 miles away - WOMELSDORF, PA
$4,950
958.8 miles away - HILLSBORO, TX
OKADA Top 55, hydraulic hammer, 48x40"x28", fully operational, inspected by Okada shop
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
958.8 miles away
$4,950
426.6 miles away - NORWICH, NY
of 2
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.