$585,000
1131.4 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 19” long x 60” wide long in feed conveyer, 38” tall x 56” wide Drum opening, 48” wide discharge conveyer, Magnetic end roller, Caterpillar 950HP C27 Turbo Diesel, (No emission system and does not require DEF fluid) Hydraulic reversing fans, Remote controller, 350 Gallon diesel tank, 20 Cutters/teeth on drum, 26” wide track pads, Machine total weight is 95,000lbs, Overall width: 10’ Overall Height: 12’
$395,000
1131.4 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 60" W x 37" H Drum opening, 54” wide discharge conveyor, Caterpillar C18 750HP Turbo Diesel, (Does not require DEF fluid), Hydraulic reversing fans, 11HP onboard Honda 175PSI Compressor, Onboard Honda water/trash pump, 300 Fuel tank, Approximant machine weight: 80,000lbs, Remote controller,
$365,000
1131.4 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 28” wide, Rock chain, Sectional boom, Elevating cab, Sliding offset discharge conveyor, 24” wide track pads, 275HP Cat C9 turbo diesel, Does not require Def, Machine weighs; 75,000lbs
$298,000
1131.4 miles away - SAN ANTONIO, TX
4,500 Gallon Niece Water Tank, Two Rear Sprayers Left and right side Sprayers Rear gravity dump pipe/dispenser, Joystick Controlled Top Mounted Water Cannon Rear hose real, 314HP Cummins 6.7 turbo diesel, Auto trans with 6 forward and 3 reverse gears, 31mph Max Travel Speed 79 Gal fuel tank 800/45-30.5 flotation Tires 10’5” wide 12’ 3” tall Machine weight empty: 41,500lbs
$290,000
1131.4 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 24” wide, Rock chain, Elevating cab, Sliding offset discharge conveyor, 20” wide track pads, 275HP Cat C9 turbo diesel, Pre emissions (no def), Machine weighs; 75,000lbs
$275,000
1131.4 miles away - SAN ANTONIO, TX
Cab with A/C and Heat, 6’ deep cut, Currently set up with 20” wide rock plates, Sliding discharge conveyor, Auto greaser, Hydraulic Cumber lift, 20” track pads, Dirt drags, 250HP John Deere Turbo diesel, Machine weighs:57,000lbs
$270,000
1131.4 miles away - SAN ANTONIO, TX
AC and heated cab, VPX1250I2 Vib plow attachment, Front reel carrier, Hydraulic reel tensioner, Front 6-way blade, Machine leveling left to right, Tracer tape reel, Dual cable trays on roof, Quad rubber track, 127 HP Deutz TCD3.6L turbo diesel, Radio, Work and flasher light kit, Machine weighs: 25,000lbs
$265,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 2450
25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 52,000lbs, Machine width, 9’7”
$260,000
1131.4 miles away - SAN ANTONIO, TX
RW1240W Rock saw attachment, 40” Max depth cut, 4.5” wide cut, Quad tracks, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 28,000lbs
$255,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 5200
46 Ton Cap, 26.9Yd Struck Cap, 33 yds heaped cap, 481HP John Deere 13.5L Turbo Diesel, 29.5-R25 Tires, 160 Gallon fuel tank, Machine empty weight: 72,000lbs
$255,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 2700
25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 52,000lbs, Machine width, 9’7”
$248,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 1650
Cab with A/C and heat, 10’ 8” wide semi u blade, 5 pocket Vail ripper with 3 shanks, 205HP Turbo Diesel, Machine weighs: 50,000lbs, 23.5” wide track pads, 94 Gallon fuel tank,
$220,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 3900
Cab with AC and heat, JRB 418 quick coupler, Auxiliary hydraulics 3rd valve, Ride control / boom suspension, Backup camera, Priced with 4.75 yard GP bucket, 120” wide bucket, 249HP Turbo Diesel, 92 Gallon diesel tank, Machine weight: 42,000lbs, Forks available for additional cost,
$215,000
1131.4 miles away - SAN ANTONIO, TX
RW1240W Rock saw attachment, Hyd side shift, 40” Max depth cut, 12” wide cut, Quad tracks, AC and heated cab, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Water tanks and pump, Approximate machine weight: 27,000lbs
$210,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 7800
13'9" (4.2 M) Stick/Arm length 30’ max dig depth 84" bucket Counterweight removal system Air ride / heated seat, Rear view camera, 36” Double grouser track pads, Plumbed for hydraulic quick coupler (does not have Q/C), 463 hp Isuzu 15.7L Turbo diesel, 238 Gallon fuel tank, Machine with bucket weighs: 157,000lbs Machine width: 13’9”
$210,000
1131.4 miles away - SAN ANTONIO, TX
Horizontal grinder, 60” wide X 20’ long in feed conveyer, 60" W x 32" H Drum opening, 48” wide discharge conveyer, Caterpillar C18 755HP Turbo Diesel, No DEF fluid or emissions, Hydraulic reversing fans, Machine total weight is 67,000lbs,, Tri axle with alum wheels. Spring suspension, With Remote controller,
$210,000
1131.4 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Foam filled tires, Machine weighs: 25,000lbs
$208,000
1131.4 miles away - SAN ANTONIO, TX
FAE mulcher attachment, 87” wide cutting width, Carbide teeth, Hydraulic front mulcher door and hyd push bar, Rear-View Camera, 320 HP (239 kW) Cummins QSL9, High capacity auto reversing fan, Hydrostatic drive combined with two-speed transfer case, Attachment Pump: 100 GPM (378 LPM) @ 5,000 PSI (33,095 kPa) 127 gal. (481 L) Diesel tank, Ground Clearance: 22" (56 cm), 12MPH max travel speed, Tire size: 28L - 26, Machine overall width: 9’, Machine height: 10’ 10”, Machine weighs: 39,000lbs
$205,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 6100
Hydraulic Q/C pin grabber, Counterweight removal system, Cab with A/C and heat, 367HP Turbo Diesel, 52” bucket, 12'10” Stick length, 35.5” triple bar grousers, Machine weight: 115,000lbs, Machine width: 12’ 6” wide,
$200,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 5200
Cab with AC and heat, JRB 418 quick coupler, Ride control / boom suspension, Backup camera, 4.75 yard GP bucket, 120” wide bucket, 249HP Turbo Diesel, 92 Gallon diesel tank, Machine weight: 42,000lbs, Forks available for additional cost,
$199,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 650
Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension, 3 yard GP bucket, 100” wide bucket, 174HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 31,500lbs, 350 hours, Forks available for additional cost,
$199,000
1131.4 miles away - SAN ANTONIO, TX
hours: 3400
14’ MB, 6 wheel drive Topcon system installed, (no receivers included) Rear ripper and scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,400lbs, 17.5R25 tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat,
$195,000
1131.4 miles away - SAN ANTONIO, TX
2019 Hydra wheel Rock saw attachment, 46” Max depth cut, 8” wide cut, 125 HP Cummins turbo diesel, Foam filled tires, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs 22,000lbs,
$195,000
1131.4 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, Quad track 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 28,000lbs
$195,000
1131.4 miles away - SAN ANTONIO, TX
Hydrawheel Rock saw attachment, 46” Max depth cut, 12” wide cut, Quad track, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 27,000lbs
$190,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 5700
Cab with A/C and heat, Auto greaser, 367HP Turbo Diesel, 72” bucket, 11'2” Stick length, 35.5” triple bar grousers, Machine weight: 113,000lbs, Machine width: 12' 6" wide, with JRB Q/C pin grabber
$189,000
1131.4 miles away - SAN ANTONIO, TX
Cab with A/C and Heat, Cut width: 100", Max Cut Depth: 16", 450HP Cummins® QSX-15. Travel speed: 0-6 mph, High-flotation 620/75 R26 tires, Joy stick-controlled steering, Four steering modes: coordinated steer, crab steer, front steer only, rear steer only, Cab can offset to the right side of the machine, Fuel Tank - 240 gal, Machine weighs: 60,000lbs
$185,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 650
Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension, 2.75yard GP bucket, 100” wide bucket, 161HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 29,500lbs, Forks available for additional cost,
$185,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 5300
25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 55,000lbs, Machine width, 9’7”
$180,000
1131.4 miles away - SAN ANTONIO, TX
Hours: 4150
Cab with AC and heat, Fusion quick coupler, Joystick steering, Ride control / boom suspension, Backup camera, Powered and heated mirrors, 4.75 yard GP bucket, 115” wide bucket, 249HP Turbo Diesel, 68 Gallon diesel tank, 23.5R25 Firestone Versabuilt Radials Machine weight: 42,500lbs, Forks available for additional cost,
of 14
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.