HH Fabrications Backhoe
Contact for Price
658.3 miles away - WINSTED, MN
Backhoe - 20” bucket with four teeth. Grease-able heavy duty pins. Requires a minimum 65 HP. Equipped with a 3” x 16” hydraulic cylinder, hoses and couplers. Bucket wall is 1/4" plate steel; bottom is 1/2" plate steel. Digs up to 7 ½ feet deep. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. 10” bucket also available.
HH Fabrications Big Ripper
Contact for Price
658.3 miles away - WINSTED, MN
Big Ripper - Includes three replaceable ripper teeth. Ripper teeth are 6” long. Reinforced heavy duty universal mounting brackets. Half moon plasma cut end plates made from ½” plate steel. Ideal for roots, stumps, trenching and boulders.
HH Fabrications Big Ripper Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Big Ripper Grapple - Includes three replaceable ripper teeth. Ripper teeth are 6” long. Constructed of two sleeved 24” conus tines. Single hydraulic cylinder. Reinforced heavy duty universal mounting brackets. Half moon plasma cut end plates made from ½” plate steel. Includes flat faced couplers and hoses with built in orifices. Ideal for stumps, rocks and brush.
HH Fabrications Brush Devil Mower
Contact for Price
658.3 miles away - WINSTED, MN
Brush Devil Mower - 60" or 72" available with optional gauge wheel. The Brush Devil mower cuts small trees, brush and grass. Complete with heavy duty gear box. Powered by Parker motor. Torque at 3000 PSI. Requires 15 to 21 GPM. Replaceable heat-treated updraft blades. Front and rear chain guards. Reinforced heavy duty universal mounting brackets. Flat Faced hydraulic couplers included. Optional gauge wheel available.
HH Fabrications Bucket Curved Tine Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Bucket Curved Tine Grapple - 60", 66", 72" and 80" standard. Bucket constructed of 1/4” plate steel with 3/4” x 6” cutting edge. Single 2”x 8” hydraulic cylinder. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Half moon plasma cut end plates made from ½” plate steel. Grapple consists of four 24” curved conus tines. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Bucket Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Bucket Grapple - 60", 72" and 80" standard. Bucket constructed of ¼” plate steel with ¾” x 6” cutting edge. Heavy duty grapples made from ½” plate steel. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Two 2”x 8” hydraulic cylinders. Half moon plasma cut end plates made from ½” plate steel. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Claw Bucket Curved Tine Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Claw Bucket Curved Tine Grapple - Bucket constructed of ¼” plate steel with ¾” x 6” cutting edge. Five removable 32" forged curved tines with sleeves. Complete with cylinder, hoses and flat faced couplers with built in orifices. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Also available for tractor loaders. Pivot points are all sleeved with grease inserts. Ideal for feed, silage, hay, round bales, packed material, debris and brush clean up.
HH Fabrications Concrete Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Concrete Bucket - Constructed of ¼” plate steel. Heavy duty universal mounting brackets. Ideal for any mason work.
HH Fabrications Dirt Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Dirt Bucket - 60", 66", 68", 72", 80" and 84" standard. Constructed of 1/4" plate steel with 3/4" x 6” Cutting Edge weld on (bolt on options also available. 1/2" x 4” wear plates on bottom for extra strength. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.
HH Fabrications Fork Mount Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Fork Mount Bucket - 72" and 96" standard. Constructed of 3/16” plate steel. Mounts forks up to 2.5” thick by 7” wide. 1/2” x 6” Cutting Edge. Includes 1" retaining pins. Works with most forklifts and telehandlers.
HH Fabrications Hydraulic Tree & Root Puller
Contact for Price
658.3 miles away - WINSTED, MN
Hydraulic Tree & Root Puller - 3" x 8" hydraulic cylinder and hoses. Flat faced couplers included. 3000 PSI recommended. Heavy duty frame. Reinforced heavy duty universal mounting brackets. Teeth are constructed from Grade 50 steel. Pulls 5” to 8” trees, roots and posts.
HH Fabrications Industrial Tine Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Industrial Tine Grapple - 60" and 72" standard sizes. Tines are constructed of 1 7/8” round stress shaft sleeved and pinned. Heavy duty grapples made from ½” plate steel. Two 2”x 8” hydraulic cylinders. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Includes flat faced couplers and hoses with built in orifices. Ideal for logging, demolition, brush, manure and hay.
HH Fabrications Large Square Bale Spear
Contact for Price
658.3 miles away - WINSTED, MN
Large Square Bale Spear - Constructed of heavy duty 3” x 3” x ¼” steel frame. Four 32” German tempered (SHW) steel conus tines on the bottom. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. Frame will support two bales.
HH Fabrications Leveling Bar
Contact for Price
658.3 miles away - WINSTED, MN
Leveling Bar - Standard size 78". Constructed from two ½” x 6” hardened cutting edges (one in front and one in back of the leveling bar). Frame constructed with 2”x 4” and 2”x 2” ¼” tubing. 2 ½” 2 ½” x 3/8” angle iron is welded in the center, 1” higher than the cutting edge which allows the dirt to roll. Step is welded on for easy access. Reinforced heavy duty universal mounting brackets. Lift tabs (3/8” angles on top) are welded on frame so the attachment can be easily moved or carried with a bucket. Ideal for landscaping, driveways, parking lots and concrete work.
HH Fabrications Material Fork Curved Tine Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Material Fork Curved Tine Grapple 60", 66", 72" and 80" standard. Heavy duty frame. 32” Tines are sleeved and constructed of 1 ½” square stress shaft. Tines tapered for easy penetration. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Single 2”x 8” hydraulic cylinder. Grapple consists of four 24” curved conus tines. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Material Fork Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Material Fork Grapple - 60", 66",72" and 80" standard. Heavy duty frame. 32” Tines are sleeved and constructed of 1 1/2” square stress shaft. Tines tapered for easy penetration. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Heavy duty grapples made from ½” plate steel. Two 2”x 8” hydraulic cylinders on the double grapple. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Material Forks
Contact for Price
658.3 miles away - WINSTED, MN
Material Forks - Standard sizes 60", 66" and 72" and 80". Heavy duty frame. 32” Tines are sleeved and constructed of 1 ½” square stress shaft. Tines tapered for easy penetration. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.
HH Fabrications Pallet Fork
Contact for Price
658.3 miles away - WINSTED, MN
Pallet Fork - •Forks are 1 3/8” thick x 4” wide and 48” long. Frames are 47” wide. Forks are adjustable. Slide rail forks are 1 ¼” x 47”. Heavy duty 4,000 pound capacity. Reinforced heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. Side step for easy access.
HH Fabrications Post Hole Auger Drive Unit & Augers
Contact for Price
658.3 miles away - WINSTED, MN
Post Hole Auger Drive Unit & Augers - •Hydraulic (orbit) drive unit – low speed / high torque (med. flow). Digs 4 ½ to 5 feet deep without extensions. Direct drive – no chains. 2” output round shaft. Reinforced heavy duty universal mounting brackets. Recommended 15 – 20 GPM. Augers available in 6”, 9”, 12”, 15”, 18” and 24” (sold separately).
HH Fabrications PTO Adapter
Contact for Price
658.3 miles away - WINSTED, MN
PTO Adapters - Frame constructed of ¼” 3”x 3” and ¼” 2”x 2” steel tubing. Operates off of the skid steer hydraulics. Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP off of the power take off). No need to modify power take off shafts. RPM 540. Adjustable lower arms. Reinforced heavy duty universal mounting brackets. Complete with motor, hydraulic hoses and flat faced couplers. Ideal for three point power take off equipment – snow blowers, mowers, tillers, post hole augers, etc.
HH Fabrications Quick Hitch
Contact for Price
658.3 miles away - WINSTED, MN
Quick Hitch - Frame constructed of ¼” 2”x 2” Square Tubing. Includes two receiver tubes. Pin type drawer bar on the bottom. Tri-ball hitch in top receiver (sizes 1 7/8”, 2” and 2 5/16”). Reinforced heavy duty universal mounting brackets. Ideal for boats, 5th wheel trailers, machinery, trailers, etc.
HH Fabrications Rock Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Rock Bucket - 58", 70" and 80" standard. Constructed of 1” solid plate steel Grade 50 with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets. Bucket constructed for many years of use. Ideal for rocks, brush and debris.
HH Fabrications Rock Bucket Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Rock Bucket Grapple - 58", 70" and 80" standard. Constructed of 1” solid plate steel with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Heavy duty grapples made from ½” plate steel. 2”x 8” hydraulic cylinder. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Root Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Root Grapple - 62", 74" and 84" standard. Constructed of 1/2" plate steel with two 1 1/2" solid shafts running through the bottom. 1/2" Gussets welded in for extra strength. Heavy duty grapples made from 1/2” plate steel. Two 2”x 8” hydraulic cylinders. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Includes flat faced couplers and hoses with built in orifices. Ideal for demolition, logging, brush, rocks, concrete, etc.
HH Fabrications Round Bale Spear (2 Tine)
Contact for Price
658.3 miles away - WINSTED, MN
Round Bale Spear (2 Tine) - Constructed of heavy duty 3” x 3” x 1/4” steel frame. Two 49” German tempered (SHW) steel conus tines on the bottom. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models.
HH Fabrications Round Bale Spear (3 - Tine)
Contact for Price
658.3 miles away - WINSTED, MN
Round Bale Spear (3 - Tine) - Constructed of heavy duty 3” x 3” x ¼” steel frame. Two 24” German tempered (SHW) steel conus tines on the bottom. One 49” German tempered (SHW) steel conus tine top center. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models.
HH Fabrications Slush Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Slush Bucket - 60", 66", 68", 72", 80", 84" standard. Constructed of 1/4” plate steel with 3/4” x 6” Cutting Edge weld on (bolt on options available). 1/2” x 4” wear plates on bottom for extra strength. Bucket sides higher for increased volume. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.
HH Fabrications Snow Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Snow Buckets - 6FT, 7FT, 8FT, 9FT and 10FT standard. Constructed of ¼” plate steel with ¾” x 6” Cutting Edge (weld on or bolt on). Perforated top for volume and great visibility. ½” x 4” wear plates on bottom for extra strength. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Three to five ½” x 4” wear plates (depending on size). Step on either side for easy access.
HH Fabrications Snow Pusher - "Snow Dozer"
Contact for Price
658.3 miles away - WINSTED, MN
"Snow Dozer" Snow Pusher - 8' and 10' widths available. Constructed of ¼” plate steel. Reinforced sidewalls. Reversible polyurethane cutting edge. Rubber edges require little maintenance since they are more forgiving than steel edges. Engineered for strength and optimal pushing capacity. Ideal for all conditions – best suited for clearing snow from concrete and gravel.
HH Fabrications Tiger Claw
Contact for Price
658.3 miles away - WINSTED, MN
Tiger Claw - 84", 96" and 108" standard sizes. Bucket constructed of 1/4” plate steel with 3/4” x 6” bolt on cutting edge. Four removable curved tines constructed of 3/4” T-1 plate steel with side gussets. Reinforced heavy duty mounting brackets – various loader mounts available. Two 2 ½” x 10” hydraulic cylinders. Four to five wear plates depending on size. Hoses with sleeves for extra protection and couplers included. Grease-able pivot points. Perforated top for volume and visibility. Ideal for agricultural and heavy duty construction. Actual weight dependent on mounting brackets.
of 2
Filter by State