Primary Contact
Equipment Listings
HH Fabrications Rock Bucket Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Rock Bucket Grapple - 58", 70" and 80" standard. Constructed of 1” solid plate steel with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Heavy duty grapples made from ½” plate steel. 2”x 8” hydraulic cylinder. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications U-Blade
Contact for Price
658.3 miles away - WINSTED, MN
U-Blade - Main frame is constructed of 1/4” 2”x 2” wall tubing. Grade 50 plate steel for longer life. Universal plates 5/16” thick welded on the frame. The U-Blade is made of 1/2” thick steel and is beveled on the front and back for two way digging – forward and backward. Ideal for transplanting trees, trenching, lifting out rocks or stumps. Blade diameter measures 26 inches.
HH Fabrications PTO Adapter
Contact for Price
658.3 miles away - WINSTED, MN
PTO Adapters - Frame constructed of ¼” 3”x 3” and ¼” 2”x 2” steel tubing. Operates off of the skid steer hydraulics. Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP off of the power take off). No need to modify power take off shafts. RPM 540. Adjustable lower arms. Reinforced heavy duty universal mounting brackets. Complete with motor, hydraulic hoses and flat faced couplers. Ideal for three point power take off equipment – snow blowers, mowers, tillers, post hole augers, etc.
HH Fabrications Snow Pusher - "Snow Dozer"
Contact for Price
658.3 miles away - WINSTED, MN
"Snow Dozer" Snow Pusher - 8' and 10' widths available. Constructed of ¼” plate steel. Reinforced sidewalls. Reversible polyurethane cutting edge. Rubber edges require little maintenance since they are more forgiving than steel edges. Engineered for strength and optimal pushing capacity. Ideal for all conditions – best suited for clearing snow from concrete and gravel.
HH Fabrications Fork Mount Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Fork Mount Bucket - 72" and 96" standard. Constructed of 3/16” plate steel. Mounts forks up to 2.5” thick by 7” wide. 1/2” x 6” Cutting Edge. Includes 1" retaining pins. Works with most forklifts and telehandlers.
HH Fabrications Rock Bucket
Contact for Price
658.3 miles away - WINSTED, MN
Rock Bucket - 58", 70" and 80" standard. Constructed of 1” solid plate steel Grade 50 with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets. Bucket constructed for many years of use. Ideal for rocks, brush and debris.
HH Fabrications Round Bale Spear (3 - Tine)
Contact for Price
658.3 miles away - WINSTED, MN
Round Bale Spear (3 - Tine) - Constructed of heavy duty 3” x 3” x ¼” steel frame. Two 24” German tempered (SHW) steel conus tines on the bottom. One 49” German tempered (SHW) steel conus tine top center. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models.
HH Fabrications Big Ripper Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Big Ripper Grapple - Includes three replaceable ripper teeth. Ripper teeth are 6” long. Constructed of two sleeved 24” conus tines. Single hydraulic cylinder. Reinforced heavy duty universal mounting brackets. Half moon plasma cut end plates made from ½” plate steel. Includes flat faced couplers and hoses with built in orifices. Ideal for stumps, rocks and brush.
HH Fabrications Big Ripper
Contact for Price
658.3 miles away - WINSTED, MN
Big Ripper - Includes three replaceable ripper teeth. Ripper teeth are 6” long. Reinforced heavy duty universal mounting brackets. Half moon plasma cut end plates made from ½” plate steel. Ideal for roots, stumps, trenching and boulders.
HH Fabrications Bucket Curved Tine Grapple
Contact for Price
658.3 miles away - WINSTED, MN
Bucket Curved Tine Grapple - 60", 66", 72" and 80" standard. Bucket constructed of 1/4” plate steel with 3/4” x 6” cutting edge. Single 2”x 8” hydraulic cylinder. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Half moon plasma cut end plates made from ½” plate steel. Grapple consists of four 24” curved conus tines. Includes flat faced couplers and hoses with built in orifices.
HH Fabrications Large Square Bale Spear
Contact for Price
658.3 miles away - WINSTED, MN
Large Square Bale Spear - Constructed of heavy duty 3” x 3” x ¼” steel frame. Four 32” German tempered (SHW) steel conus tines on the bottom. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. Frame will support two bales.
HH Fabrications Pallet Fork
Contact for Price
658.3 miles away - WINSTED, MN
Pallet Fork - •Forks are 1 3/8” thick x 4” wide and 48” long. Frames are 47” wide. Forks are adjustable. Slide rail forks are 1 ¼” x 47”. Heavy duty 4,000 pound capacity. Reinforced heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. Side step for easy access.
Equipment Types
Equipment Brands
Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
---|---|---|---|---|
HH Fabrication & Repair LLC |
|
|
|
|
Show More