$21,000
975.9 miles away - MADRID, NE
BushHog 3810 mower. Low hours. 10 year gearbox warranty. 2023 Bush Hog® Flex-Wing Rotary Cutter 3810 The right-hand wing model 3810 is easier to service and has features that maximize performance and durability in all uses. Made especially for highway right-of-way mowing or other areas where the Flex-Wing with a single wing is the best fit, the 3810 is unsurpassed in performance, durability, and reliability. Features may include: Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact thatmight damage the sidebands. Center section blades properly align with center wheels to closely cut out the bottom of ditches. Grease fittings and spring steel bushings at axle pivot points for longer life. Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up. CONSTRUCTION Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan. The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels. Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced. SAFETY Highway safety lighting is standard. Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan. The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels. Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
$15,737
1002.3 miles away - BIG SPRINGS, NE
$13,772
1002.3 miles away - BIG SPRINGS, NE
10' Hydraulic Angle and Tilt with skid shoes
$9,750
1002.3 miles away - BIG SPRINGS, NE
PTO (RPM): 540
PTO (RPM): 540, Guards: Chain, Batwing: No, frontguards: Chain, Mower Type: 3 Pt., New: New, safetylights: No, Width (inches): 96
$9,750
850.7 miles away - BURWELL, NE
PTO (RPM): 540
Number of Gear Boxes: 3
PTO (RPM): 540, Guards: Chain, Batwing: No, Mower Type: 3 Pt., New: New, Number of Blades: 4, Width (inches): 98
$7,950
850.7 miles away - BURWELL, NE
NEW , 8 FT. , HYDR. TILT ,ANGLE, OFFSET
$7,239
1002.3 miles away - BIG SPRINGS, NE
PTO (RPM): 540
PTO (RPM): 540, Guards: Chain, Batwing: No, frontguards: Chain, Mower Type: 3 Pt., New: New, numtailwheels: 2, safetylights: No, Width (feet): 7
$5,400
1002.3 miles away - BIG SPRINGS, NE
Rev Tine
$3,800
1002.3 miles away - BIG SPRINGS, NE
Guards: Solid, Batwing: No, frontguards: Chain, Mower Type: 3 Pt., New: New, safetylights: No, Width (feet): 6
$3,575
850.7 miles away - BURWELL, NE
NEW 8 & 7 ft. road grader , angle blades to spread gravel , 6 adjustable shanks , 3 pt ..please call for prices
$3,448
1002.3 miles away - BIG SPRINGS, NE
PTO (RPM): 540
$2,500
921.9 miles away - MAXWELL, NE
NO MOUNTS, Blue, 80" pin on Bucket, 2 Spool Valve
$2,300
1002.3 miles away - BIG SPRINGS, NE
540 PTO
$995
921.9 miles away - MAXWELL, NE
Call for Freight Quote on all orders before Ordering online.
Contact for Price
921.9 miles away - MAXWELL, NE
9' Blade, Cat I,II, 3pt, Hyd Swing, Tilt, Angle
Contact for Price
850.7 miles away - BURWELL, NE
Batwing: Yes, Cuttingcapacity (inches): 1.5, Cuttingheight (inches): 2, Gearboxratingcenter (hp): 160, Gearboxratingouterwing (hp): 65, Mintractorptohorsepower (hp): 50, Mower Type: Pull-Type, New: New, numtailwheels: 6, Width (inches): 12
Contact for Price
975.9 miles away - MADRID, NE
Guards: Chain, Batwing: Yes, Bladetipspeed (foot/minute): 14504, Cuttingheight (inches): 2, deckthickness: 10 Gauge, deckthicknesswings: 10 Gauge, frontguards: Chain, gearboxwarranty: Yes, Mintractorptohorsepower (hp): 50, Mower Type: Pull-Type, New: New, sideframethickness: 10 Gauge, Width (feet): 12
Contact for Price
975.9 miles away - MADRID, NE
Guards: Chain, Batwing: Yes, Bladetipspeed (foot/minute): 14504, Cuttingheight (inches): 2, deckthickness: 10 Gauge, deckthicknesswings: 11 Gauge, frontguards: Chain, Mintractorptohorsepower (hp): 50, Mower Type: 3 Pt., New: New, sideframethickness: 10 Gauge, Width (feet): 12
Contact for Price
921.9 miles away - MAXWELL, NE
78" Cut, Cat I 3Pt, 16" Scallop Blades, 9" Front, 7 1/2" Rear, Scraper Kit
Contact for Price
850.7 miles away - BURWELL, NE
Guards: Chain, Batwing: Yes, Cuttingcapacity (inches): 3.5, Cuttingheight (inches): 2, deckthickness: 10 Gauge, drivelineprotection: Slip Clutch, frontguards: Chain, Gearboxratingcenter (hp): 250, Gearboxratingouterwing (hp): 210, Mintractorptohorsepower (hp): 60, Mower Type: Pull-Type, New: New, PTO Size: 1 3/8, swivelhitch: Yes, Width (feet): 15
Contact for Price
921.9 miles away - MAXWELL, NE
Rear Tires: 25.5X8-14, 3 Hyd, 15' Cut, 1 3/8 1000 PTO, Chains Front & Rear, Duals with Center Deck, Duals wings Deck
Contact for Price
975.9 miles away - MADRID, NE
2024 Bush Hog® Flex-Wing Rotary Cutter 2215 The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On. Features may include: Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands. Center section blades properly align with center wheels to closely cut out the bottom of ditches. Grease fittings and spring steel bushings at axle pivot points for longer life. Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up. CONSTRUCTION Center section axle spindles are centered on the axle arm for equalized loading of vertical forces. Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times. Greaseable Axle Pivot Points with spring steel bushings Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear. Powder Coat Paint SAFETY Improved design of wing sidebands means less damage caused by sideband-to-ground contact.
Contact for Price
850.7 miles away - BURWELL, NE
PTO (RPM): 540
PTO (RPM): 540, Batwing: No, Bladetipspeed (foot/minute): 15828, Cuttingcapacity (inches): 2, Cuttingheight (inches): 12, drivelineprotection: Slip Clutch, Gearboxrating (hp): 130, Gearboxratingcenter (hp): 140, gearboxwarranty: Yes, Mintractorptohorsepower (hp): 70, Mower Type: 3 Pt., New: New, quickhitchcompatible: Yes, Weight (pounds): 2100, Width (feet): 10
Contact for Price
921.9 miles away - MAXWELL, NE
2 Hyd, 7' Bucket, Quick, Attach, Hoses to Remotes, Quick Attach Loader, John Deere 2510-4320 Mounts
Contact for Price
921.9 miles away - MAXWELL, NE
8' Cut, 3Pt Cat I, 18" Scallop Blades, 9" Front, 7 1/2" Front, Scrapers
Contact for Price
921.9 miles away - MAXWELL, NE
7', 3Pt, CatI, Angle, Tilt
Contact for Price
975.9 miles away - MADRID, NE
2024 Bush Hog® 3D Series 3D118 Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs. Features may include: Adjustable gang angles, front and rear, using an easy-tograsp handle Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series Variable Blade Spacings Available: 9 in. front and rear gangs for tough-to-cut “New Ground” 7 1/2 in. front and rear gangs for finer soil finishing 9 in. front gangs/7 1/2 in. rear gangs–the best of both worlds CONSTRUCTION Square and rectangle tube steel frames and gang tubes Self-aligning, sealed ball bearings Notched disc blades for maximum cutting action 1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series Available in tractor colors Notched discs for maximum cutting action
Contact for Price
921.9 miles away - MAXWELL, NE
1 Hyd, RED,3Pt
Contact for Price
921.9 miles away - MAXWELL, NE
Tires: 25.5x8-14, 3 Hyd, 15' Cut, 1000 PTO, Duals Middle, Singles Wings, Foam Filled Tires, Single Row Chains Front & Rear
Contact for Price
975.9 miles away - MADRID, NE
2021 Bush Hog® 50 Series 7 ft. Ideal for jobsites, landscaping, snow removal, and homeowners, the 50 Series is the first choice for those who need a 50 PTO horsepower rated blade with the features and capabilities of a much heavier unit. Available in 6 & 7 ft. operating widths. Both the 35 and 50 Series blades feature tilt, angle, and offset adjustments in both forward and reverse positions. Features may include: 50 Series is available in 6 ft & 7 ft. operating widths. Tilt, Angle and Offset Adjustments Reversible Cutting Edge Standard Parking Stand Double Strap Hitch (50 Series) Quick Hitch Compatible Available in Tractor Colors CONSTRUCTION Tubular Construction A Frame Construction Double Strap Hitch (50 Series) Reversible Cutting Edge Powder Coat Paint
of 3
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.