Primary Contact
Equipment Listings
$4,200
976.3 miles away - MADRID, NE
Contact for Price
976.3 miles away - MADRID, NE
Take your harvest to the extreme with the all-new 19-Series X-TREME grain cart from Unverferth. Featuring an exclusive front-folding, single corner-auger with a forward reaching design, the 19-Series lineup of grain carts positions the downspout ahead of the hitch for an enhanced line of sight from the tractor cab. The upper auger folds diagonally across the front of the grain cart, permitting a longer upper auger which increases side reach and height. The all-new four-way downspout features an increased range of motion for added operator convenience. Available in 1550, 1330, 1100 and 1000 bushel carrying capacities with unloading speeds up to 650 bushels per minute! The Unverferth 19-Series X-TREME grain cart features an innovative design that increases operator comfort, improves unloading accuracy and will make your harvest more efficient. The 19-Series X-TREME grain carts can truly take your harvest to the extreme.
$21,000
976.3 miles away - MADRID, NE
BushHog 3810 mower. Low hours. 10 year gearbox warranty. 2023 Bush Hog® Flex-Wing Rotary Cutter 3810 The right-hand wing model 3810 is easier to service and has features that maximize performance and durability in all uses. Made especially for highway right-of-way mowing or other areas where the Flex-Wing with a single wing is the best fit, the 3810 is unsurpassed in performance, durability, and reliability. Features may include: Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact thatmight damage the sidebands. Center section blades properly align with center wheels to closely cut out the bottom of ditches. Grease fittings and spring steel bushings at axle pivot points for longer life. Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up. CONSTRUCTION Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan. The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels. Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced. SAFETY Highway safety lighting is standard. Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan. The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels. Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
Contact for Price
976.3 miles away - MADRID, NE
2023 Bush Hog® MBX Series MBX60 Bush Hog’s MBX Series Medium Duty Box Blades are the ideal choice for use around the farm or by landscape contractors on the jobsite. These box blades are rated for use on 2WD tractors up to 65 PTO horsepower and 4WD tractors up to 55 PTO horsepower with a Cat. I or II 3-point hitch. They feature a heavy duty A-frame, heat-treated scarifier shanks, and a swinging tailgate to provide years of trouble-free performance. Whether you are grading driveways, cleaning out barns, or leveling a construction jobsite, these medium duty box blades are sure to meet your needs. Features may include: Heavy Duty A-Frame with Category I & II Quick Hitch Heat-Treated Scarifier Teeth Heavy-Duty Triple Lug Hitch Heat-Treated Reversible Cutting Edges Floating Tailgate Heavy-Duty End Plates Powder Coat Paint
Contact for Price
976.3 miles away - MADRID, NE
2024 UM Unverferth Raptor - 3-Point 2015MT STRIP TILLAGE TOOL With less surface soil disturbance, strip tillage will retain organic material, reduce erosion and conserve fuel by only tilling the strip that is planted into. The Unverferth Raptor strip tillage tool was built for professional growers looking to take advantage of the benefits that strip tillage can provide. Pull-type models feature a front-folding toolbar and vertical-folding row units for narrow transport and compact storage. The ground-breaking TerrainPro row unit allows each row to travel up and down independently for the most consistent row-to-row tillage depth and fertilizer placement. The Raptor strip-tillage tool is the first all-in-one solution for banding fertilizer and features greater operator visibility, easy filling when equipped with fertilizer and a row unit with unmatched performance. Features may include: TOOLBAR ALL-IN-ONE SOLUTION The pull-type Unverferth Raptor strip tillage tool can be ordered with an integrated dry or liquid fertilizer system for banding fertilizer directly in the row during the strip tillage pass. Pull-type toolbars can also be ordered to just perform a strip-tillage pass along with 3-point mounted toolbars. MODELS The Unverferth Raptor strip tillage tool can be ordered as a pull-type or 3-point mounted toolbar. ST models feature a pull-type designed toolbar without a fertilizer application system while MT models feature a 3-point mounted toolbar. 3-POINT 3-point models are available as a 6-, 8- or 12-row machine with 30”, 36” or 38” row spacing and heavy-duty, double wall frame with a 6” x 6” rear mounting bar for maximum durability. ROW UNIT TERRAINPRO The Raptor strip tillage tool features the innovative TerrainPro row unit that has been developed and tested in a wide range of soil types for consistent tillage depth and accurate fertilizer placement, when equipped. FREE-FLOATING DESIGN Each row unit features independent parallel linkage, which allows it to free-float 7” upward and 4” downward to ensure that each shank runs at the same depth for consistent tillage and fertilizer placement. LEAD COULTER The 20” diameter lead coulter features 1,500 lbs. of down pressure to slice through the toughest soils and 6-bolt greaseable hubs with 5 layers of seal protection for long-term, trouble-free use. DEPTH CONTROL WHEEL Independent row unit depth is maintained by the crowfoot depth control wheel that runs between the row cleaners and the shank for consistent shank depth from row to row. STRIP TILL SHANK The shank features tool-free depth adjustment from 4” to 12” deep and a convenient depth gauge which allows the operator to quickly and easily adjust each shank. CLOSING COULTERS The 18” notched concave closing coulters on each side of the shank keeps the soil in the path of the trailing basket. Each coulter floats independently from the other to keep constant ground contact through uneven terrain and utilize 6-bolt hubs with triple-lip seals for long-term, trouble-free use. CONDITIONING BASKET The trailing 14” diameter crowfoot conditioning baskets break up clods, condition the berm and feature a unique design to prevent plugging with mud, rocks or other debris. IDEAL PLANTING STRIPS The TerrainPro row unit leaves a perfectly conditioned strip that warms quickly in the spring, reduces soil compaction and improves overall soil health. FERTILIZER BANDING FOR GREATER YIELD DT models feature a dry fertilizer system and LT models feature a liquid fertilizer system for pull-type Raptor models.
Contact for Price
976.3 miles away - MADRID, NE
Contact for Price
976.3 miles away - MADRID, NE
PTO (RPM): 1000, baleapplicator: No, Balediameter (feet): 6, Balesize (pounds): 2000, Balewidth (feet): 5, New: New, Self Propelled: No
Contact for Price
976.3 miles away - MADRID, NE
implementtype: Rotary Tiller, New: New, Rotary Type: Pull, Weight (pounds): 374, Width (feet): 4, Workingdepth (inches): 6
$28,000
976.3 miles away - MADRID, NE
$4,700
976.3 miles away - MADRID, NE
Horse Power: 63
Drive Type: 2WD
Contact for Price
976.3 miles away - MADRID, NE
$58,000
976.3 miles away - MADRID, NE
Hours: 7444
Transmission: Powershift
Horse Power: 150
Drive Type: MFWD
Hours: 7444, Transmission: Powershift, Horse Power: 150, Drive Type: MFWD, Fuel Type: Diesel, 3-Point Hitch: Yes, New: Used, PTO (RPM): 540/1000, antiquecollector: No, Articulating: No, Auto Guidance: No, Auto Guidance Ready: No, autonomous: No, Backhoe: No, Cab Air: Yes, Cab Heat: Yes, creepergear: No, Differential Lock: Yes, Front Fenders: No, Front Suspension: No, Front Tire Size: 14.9R/30, Front Tire Type: Singles, frontpto: No, frontthreepointhitch: No, gpsready: No, hasfrontweights: Yes, haspto: Yes, hasrearweights: No, highclearance: No, Horsepowerpto (hp): 150, hydraulicflowtype: Standard, Loader: No, lowprofiletractor: No, midmounthydraulics: No, numfrontweights: 25, PTO Size: 1 3/8, Quick Hitch: Yes, Rear Tire Size: 14.9R/46, Rear Tire Type: Duals, Remote Hydraulics: 4, Wheel Type: Tires
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|
Show More