$25,250
472.5 miles away - CEDAR RAPIDS, IA
2023 Fecon® SHX33SX Auger Stump Grinder Attachment The Fecon Stumpex 2-Speed stump grinder mounts to skid steers, with as little as 20 gpm hydraulic output. The Stumpex low RPM and 33,600 ft. per lb. of torque enables it to draw itself down into any species of stump. The Stumpex can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass. Larger diameter stumps are processed by making additional passes. A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge. Low maintenance costs, high production, and less clean-up make the Stumpex a great opportunity for stump grinding contractors in land clearing, tree care and municipal applications. WATCH VIDEO under the Videos tab.
$24,198
566.3 miles away - DES MOINES, IA
2023 Fecon® SHX33SX Auger Stump Grinder Attachment The Fecon Stumpex 2-Speed stump grinder mounts to skid steers, with as little as 20 gpm hydraulic output. The Stumpex low RPM and 33,600 ft. per lb. of torque enables it to draw itself down into any species of stump. The Stumpex can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass. Larger diameter stumps are processed by making additional passes. A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge. Low maintenance costs, high production, and less clean-up make the Stumpex a great opportunity for stump grinding contractors in land clearing, tree care and municipal applications. WATCH VIDEO under the Videos tab.
$18,874
518.7 miles away - WATERLOO, IA
2020 Fecon® SHX33SX Auger Stump Grinder Attachment The Fecon Stumpex 2-Speed stump grinder mounts to skid steers, with as little as 20 gpm hydraulic output. The Stumpex low RPM and 33,600 ft. per lb. of torque enables it to draw itself down into any species of stump. The Stumpex can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass. Larger diameter stumps are processed by making additional passes. A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge. Low maintenance costs, high production, and less clean-up make the Stumpex a great opportunity for stump grinding contractors in land clearing, tree care and municipal applications. WATCH VIDEO under the Videos tab. Pricing subject to change without notice. Unit not available for sale outside the state of Iowa.
$18,000
409.6 miles away - FENTON, MO
The Fecon Stumpex features low maintenance, only requiring grease and sharpening every 1,000 stumps due to its design with no carbide tools to replace and a replaceable hardened steel cone; the low RPM auger bit (7-16 rpm) provides a safer work zone with no high-speed flying debris, all resulting in a fraction of the work time compared to conventional stumpers. To operate the Stumpex®, align it vertically over the center of the stump, engage the hydraulics, and allow the two-speed motor to first quickly thread the cone into the stump before automatically shifting into high torque, then follow the Stumpex down without pushing or pulling (using the float function if needed) until the motor shifts back to high speed after going through the bottom of the stump, and finally, lift the unit vertically to repeat the process for stumps over 28 For over 50 years, Luby Equipment has been the authorized dealer of CASE CE and Takeuchi Equipment in St. Louis and surrounding areas. Our reputation is built on trust, transparency, and a commitment to always deliver reliable, high-quality used equipment that performs. Whether you're buying for the first time or adding to your fleet, we provide peace of mind with every purchase. Always Transparent, Globally Trusted—contact us today for top-quality used equipment and unmatched customer service. ′′ .
$17,000
1131.4 miles away - SAN ANTONIO, TX
Bit diameter: 32”, 20 – 42 GPM, 4250 max PSI, Low RPM auger bit (7-16 RPM) leads to easy clean-up, No high-speed flying debris for a safer work zone, The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass, Larger diameter stumps are processed by making additional passes, A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge, Weighs: 1,368lbs, Fits to skid steers, Available new for $26,500, Used sale price…..$18,500
Contact for Price
651.1 miles away - HENDERSON, IA
Enjoy $0 Down Financing with No Payments for 6 Months, Affordable Nationwide Delivery, and Unbeatable Prices! New Fecon 2-Speed Stumpex Stump Grinder w/ a low rpm 32" bit for less flying debris, up to 20" boring depth, low maintenance AR500 3/4" steel blades, a 12 mo/1000 hr warranty, and more, with only 20-42 gpm and case drain/reversible flow required. Give us a call for competitive financing, lease-to-own, trade-ins from any brand, and affordable nationwide delivery! Enjoy upfront quotes and Monday through Sunday support so you can do what you love while we take care of the rest. We’re here to help before, during, and after the sale with thousands of parts in-stock and an experienced service team to keep you running rain or shine. As a family-owned business, no matter when you need us we’re right by your side with over 30 years of experience and thousands of happy customers (just ask to see our list of references!) Give us a call to learn more about our custom built units and attachments. Now offering Canadian financing and delivery!
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.