Contact for Price
260.1 miles away - VINCENNES, IN
The Model 24 is a pull-type ditcher-terracer designed to make surface drainage ditches, to construct and clean waterways, and to build and maintain terraces using your own farm tractor. The Model 24 has a 36″ 4-paddle impeller (digging wheel) with a 24″ cutting edge. The paddles are made of T1 steel for longer life, but are easily replaceable when worn. The cutting edge is also easily replaceable when worn. The optional terracing shield with extension controls dirt for building and reshaping terraces. It allows soil to be placed within 7 feet of the machine or controlled up to 30 feet for broad based terraces. The optional deflector shield allows soil to be placed within 7 to 12 feet of the machine.
$28,795
566.3 miles away - DES MOINES, IA
2023 Hurricane HD10000 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 10,000# breaker class. The HD10000 weighs 1907lbs. The Hurricane drop hammer HD10000 by UIT is a high-production and low-maintenance concrete drop-hammer. Easily connected to a skid steer or excavator, the HD10000 is a low-vibration drop hammer that is simple to operate. The HD10000 incorporate several innovative design features, including: A skid system for easy maneuvering over flat surfaces. The use of special steel alloys to provide extended service life in a high stress application where normal steels would fail prematurely. A heavy-duty buffer system to absorb the impact of a miss-hit. Minimal maintenance requirements, which can be simply carried out in the field with no special tools. LOW VIBRATION - Operators are more comfortable and do not feel the vibrations normally associated with hydraulic hammers. The HD10000 has a dampening system that isolate the hammer from the skids at the base of the hammer. The hammer’s force and vibrations are transferred into the ground to deliver a powerful and isolated impact. HIGH PRODUCTION - By continually advancing the skid steer or small excavator, the operator has an unobstructed view of the hammer as it strikes the ground and can guide the machine in a straight line. The HD10000 can break up to 5,000 square feet per hour of concrete. EASILY ATTACHED -Two-position mounting bracket attaches to skid steers without obstructing the door. The HD10000 can be attached to a 3,500-pound capacity skid steer. PULVERIZING FORCE - The HD10000 has the highest impact-to-weight ratio of any equipment in its class. The HD10000 delivers 250,000-foot pounds of force at 30 blows per minutes, and will break up non-reinforced concrete up to 32 inches thick. LOAD MORE DEBRIS - Where traditional hydraulic hammers chip and crack concrete into various sized chunks, the HD10000 Hurricane drop hammer pulverizes the concrete from top to bottom, breaking it into small pieces. When scooping up the hammered concrete debris, the pieces take up less room in a dump truck than hydraulic hammer chunks, enabling operators to load more volume. LOW MAINTENANCE - There are only three moving parts on the drop hammer – an industrial-strength drive chain and two steel spindles which significantly reduce maintenance costs and down time. The hydraulically driven chain lifts the steel hammer which drops to the ground and crushes the concrete. There are no bushings, accumulators, expensive seals and points to wear out or replace.
$24,995
472.5 miles away - CEDAR RAPIDS, IA
2023 Hurricane HD10000 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 10,000# breaker class. The HD10000 weighs 1907lbs. The Hurricane drop hammer HD10000 by UIT is a high-production and low-maintenance concrete drop-hammer. Easily connected to a skid steer or excavator, the HD10000 is a low-vibration drop hammer that is simple to operate. The HD10000 incorporate several innovative design features, including: A skid system for easy maneuvering over flat surfaces. The use of special steel alloys to provide extended service life in a high stress application where normal steels would fail prematurely. A heavy-duty buffer system to absorb the impact of a miss-hit. Minimal maintenance requirements, which can be simply carried out in the field with no special tools. LOW VIBRATION - Operators are more comfortable and do not feel the vibrations normally associated with hydraulic hammers. The HD10000 has a dampening system that isolate the hammer from the skids at the base of the hammer. The hammer’s force and vibrations are transferred into the ground to deliver a powerful and isolated impact. HIGH PRODUCTION - By continually advancing the skid steer or small excavator, the operator has an unobstructed view of the hammer as it strikes the ground and can guide the machine in a straight line. The HD10000 can break up to 5,000 square feet per hour of concrete. EASILY ATTACHED -Two-position mounting bracket attaches to skid steers without obstructing the door. The HD10000 can be attached to a 3,500-pound capacity skid steer. PULVERIZING FORCE - The HD10000 has the highest impact-to-weight ratio of any equipment in its class. The HD10000 delivers 250,000-foot pounds of force at 30 blows per minutes, and will break up non-reinforced concrete up to 32 inches thick. LOAD MORE DEBRIS - Where traditional hydraulic hammers chip and crack concrete into various sized chunks, the HD10000 Hurricane drop hammer pulverizes the concrete from top to bottom, breaking it into small pieces. When scooping up the hammered concrete debris, the pieces take up less room in a dump truck than hydraulic hammer chunks, enabling operators to load more volume. LOW MAINTENANCE - There are only three moving parts on the drop hammer – an industrial-strength drive chain and two steel spindles which significantly reduce maintenance costs and down time. The hydraulically driven chain lifts the steel hammer which drops to the ground and crushes the concrete. There are no bushings, accumulators, expensive seals and points to wear out or replace.
$24,339
518.7 miles away - WATERLOO, IA
REDUCED PRICE 2021 Hurricane HD10000 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 10,000# breaker class. The HD10000 weighs 1907lbs. The Hurricane drop hammer HD10000 by UIT is a high-production and low-maintenance concrete drop-hammer. Easily connected to a skid steer or excavator, the HD10000 is a low-vibration drop hammer that is simple to operate. The HD10000 incorporate several innovative design features, including: A skid system for easy maneuvering over flat surfaces. The use of special steel alloys to provide extended service life in a high stress application where normal steels would fail prematurely. A heavy-duty buffer system to absorb the impact of a miss-hit. Minimal maintenance requirements, which can be simply carried out in the field with no special tools. LOW VIBRATION - Operators are more comfortable and do not feel the vibrations normally associated with hydraulic hammers. The HD10000 has a dampening system that isolate the hammer from the skids at the base of the hammer. The hammer’s force and vibrations are transferred into the ground to deliver a powerful and isolated impact. HIGH PRODUCTION - By continually advancing the skid steer or small excavator, the operator has an unobstructed view of the hammer as it strikes the ground and can guide the machine in a straight line. The HD10000 can break up to 5,000 square feet per hour of concrete. EASILY ATTACHED -Two-position mounting bracket attaches to skid steers without obstructing the door. The HD10000 can be attached to a 3,500-pound capacity skid steer. PULVERIZING FORCE - The HD10000 has the highest impact-to-weight ratio of any equipment in its class. The HD10000 delivers 250,000-foot pounds of force at 30 blows per minutes, and will break up non-reinforced concrete up to 32 inches thick. LOAD MORE DEBRIS - Where traditional hydraulic hammers chip and crack concrete into various sized chunks, the HD10000 Hurricane drop hammer pulverizes the concrete from top to bottom, breaking it into small pieces. When scooping up the hammered concrete debris, the pieces take up less room in a dump truck than hydraulic hammer chunks, enabling operators to load more volume. LOW MAINTENANCE - There are only three moving parts on the drop hammer – an industrial-strength drive chain and two steel spindles which significantly reduce maintenance costs and down time. The hydraulically driven chain lifts the steel hammer which drops to the ground and crushes the concrete. There are no bushings, accumulators, expensive seals and points to wear out or replace.
$22,995
569.3 miles away - AMES, IA
2023 Hurricane HD10000 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 10,000# breaker class. The HD10000 weighs 1907lbs. The Hurricane drop hammer HD10000 by UIT is a high-production and low-maintenance concrete drop-hammer. Easily connected to a skid steer or excavator, the HD10000 is a low-vibration drop hammer that is simple to operate. The HD10000 incorporate several innovative design features, including: A skid system for easy maneuvering over flat surfaces. The use of special steel alloys to provide extended service life in a high stress application where normal steels would fail prematurely. A heavy-duty buffer system to absorb the impact of a miss-hit. Minimal maintenance requirements, which can be simply carried out in the field with no special tools. LOW VIBRATION - Operators are more comfortable and do not feel the vibrations normally associated with hydraulic hammers. The HD10000 has a dampening system that isolate the hammer from the skids at the base of the hammer. The hammer’s force and vibrations are transferred into the ground to deliver a powerful and isolated impact. HIGH PRODUCTION - By continually advancing the skid steer or small excavator, the operator has an unobstructed view of the hammer as it strikes the ground and can guide the machine in a straight line. The HD10000 can break up to 5,000 square feet per hour of concrete. EASILY ATTACHED -Two-position mounting bracket attaches to skid steers without obstructing the door. The HD10000 can be attached to a 3,500-pound capacity skid steer. PULVERIZING FORCE - The HD10000 has the highest impact-to-weight ratio of any equipment in its class. The HD10000 delivers 250,000-foot pounds of force at 30 blows per minutes, and will break up non-reinforced concrete up to 32 inches thick. LOAD MORE DEBRIS - Where traditional hydraulic hammers chip and crack concrete into various sized chunks, the HD10000 Hurricane drop hammer pulverizes the concrete from top to bottom, breaking it into small pieces. When scooping up the hammered concrete debris, the pieces take up less room in a dump truck than hydraulic hammer chunks, enabling operators to load more volume. LOW MAINTENANCE - There are only three moving parts on the drop hammer – an industrial-strength drive chain and two steel spindles which significantly reduce maintenance costs and down time. The hydraulically driven chain lifts the steel hammer which drops to the ground and crushes the concrete. There are no bushings, accumulators, expensive seals and points to wear out or replace.
$22,995
566.3 miles away - DES MOINES, IA
2023 Hurricane HD10000 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 10,000# breaker class. The HD10000 weighs 1907lbs. The Hurricane drop hammer HD10000 by UIT is a high-production and low-maintenance concrete drop-hammer. Easily connected to a skid steer or excavator, the HD10000 is a low-vibration drop hammer that is simple to operate. The HD10000 incorporate several innovative design features, including: A skid system for easy maneuvering over flat surfaces. The use of special steel alloys to provide extended service life in a high stress application where normal steels would fail prematurely. A heavy-duty buffer system to absorb the impact of a miss-hit. Minimal maintenance requirements, which can be simply carried out in the field with no special tools. LOW VIBRATION - Operators are more comfortable and do not feel the vibrations normally associated with hydraulic hammers. The HD10000 has a dampening system that isolate the hammer from the skids at the base of the hammer. The hammer’s force and vibrations are transferred into the ground to deliver a powerful and isolated impact. HIGH PRODUCTION - By continually advancing the skid steer or small excavator, the operator has an unobstructed view of the hammer as it strikes the ground and can guide the machine in a straight line. The HD10000 can break up to 5,000 square feet per hour of concrete. EASILY ATTACHED -Two-position mounting bracket attaches to skid steers without obstructing the door. The HD10000 can be attached to a 3,500-pound capacity skid steer. PULVERIZING FORCE - The HD10000 has the highest impact-to-weight ratio of any equipment in its class. The HD10000 delivers 250,000-foot pounds of force at 30 blows per minutes, and will break up non-reinforced concrete up to 32 inches thick. LOAD MORE DEBRIS - Where traditional hydraulic hammers chip and crack concrete into various sized chunks, the HD10000 Hurricane drop hammer pulverizes the concrete from top to bottom, breaking it into small pieces. When scooping up the hammered concrete debris, the pieces take up less room in a dump truck than hydraulic hammer chunks, enabling operators to load more volume. LOW MAINTENANCE - There are only three moving parts on the drop hammer – an industrial-strength drive chain and two steel spindles which significantly reduce maintenance costs and down time. The hydraulically driven chain lifts the steel hammer which drops to the ground and crushes the concrete. There are no bushings, accumulators, expensive seals and points to wear out or replace.
$9,595
566.3 miles away - DES MOINES, IA
2023 Hurricane HD3700 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 3,700 lb. breaker class. The HD3700 weighs 1540 lbs. and requires only 8gpm of aux flow. Units comes with mount and hoses/couplers. The Hurricane drop hammer HD3700 is a high-production low-maintenance drop-hammer for breaking concrete. Manufactured by Universal Impact Technologies, Inc., the HD3700 is easily connected to a skid steer or an excavator and efficiently breaks concrete in industrial tear-outs, as well as parking lots, curbs, roads, runways, aprons, and sidewalks up to 10 inches thick. Features: Easy Operation. Compact Design. Simple Hook Up. Low Maintenance. High Production. Low Investment. Reduced operator error and fatigue. Light weight making transport simple. Minimal wear items reduce downtime. Broad striking surface allows excellent area coverage and production. Lowest cost per yard ton figures attainable. THE HD3700 ADVANTAGE Highest impact-to-weight ratio in the industry. The bolt-on-ground engagement end plate makes maintenance accessible and easy. Low maintenance because there are no points, bushings, seals, or accumulators to replace.
$8,995
472.5 miles away - CEDAR RAPIDS, IA
2023 Hurricane HD3700 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 3,700 lb. breaker class. The HD3700 weighs 1540 lbs. and requires only 8gpm of aux flow. Units comes with mount and hoses/couplers. The Hurricane drop hammer HD3700 is a high-production low-maintenance drop-hammer for breaking concrete. Manufactured by Universal Impact Technologies, Inc., the HD3700 is easily connected to a skid steer or an excavator and efficiently breaks concrete in industrial tear-outs, as well as parking lots, curbs, roads, runways, aprons, and sidewalks up to 10 inches thick. Features: Easy Operation. Compact Design. Simple Hook Up. Low Maintenance. High Production. Low Investment. Reduced operator error and fatigue. Light weight making transport simple. Minimal wear items reduce downtime. Broad striking surface allows excellent area coverage and production. Lowest cost per yard ton figures attainable. THE HD3700 ADVANTAGE Highest impact-to-weight ratio in the industry. The bolt-on-ground engagement end plate makes maintenance accessible and easy. Low maintenance because there are no points, bushings, seals, or accumulators to replace.
$8,795
472.5 miles away - CEDAR RAPIDS, IA
2023 Hurricane HD3700 Hydraulic Drop Hammer Skid loader mounted hydraulic drop hammer in the 3,700 lb. breaker class. The HD3700 weighs 1540 lbs. and requires only 8gpm of aux flow. Units comes with mount and hoses/couplers. The Hurricane drop hammer HD3700 is a high-production low-maintenance drop-hammer for breaking concrete. Manufactured by Universal Impact Technologies, Inc., the HD3700 is easily connected to a skid steer or an excavator and efficiently breaks concrete in industrial tear-outs, as well as parking lots, curbs, roads, runways, aprons, and sidewalks up to 10 inches thick. Features: Easy Operation. Compact Design. Simple Hook Up. Low Maintenance. High Production. Low Investment. Reduced operator error and fatigue. Light weight making transport simple. Minimal wear items reduce downtime. Broad striking surface allows excellent area coverage and production. Lowest cost per yard ton figures attainable. THE HD3700 ADVANTAGE Highest impact-to-weight ratio in the industry. The bolt-on-ground engagement end plate makes maintenance accessible and easy. Low maintenance because there are no points, bushings, seals, or accumulators to replace.
$5,595
566.3 miles away - DES MOINES, IA
2023 Hurricane HVC30 Hydraulic Plate Compactor Hurricane hydraulic plate compactor with 3,400 lbs of centrifugal force and a 027 size mounting bracket. Features / Specs: 3,400 lbs centrifugal force. 12-25 gpm flow. 250 psi back pressure. Flow control, Bi-directional Permco motors, and SKF bearings. Dimensions: 26" L x 18.75" W x 18.75"H. Weighs 435 lbs. 027 quick coupler top mount. All standard equipment. Note: Hoses and Fittings NOT included. HVC Compactors unique design corner mounted shock mounts, tilted at 10 degrees, allows for better distribution of force and longer shock mount life. This creates a more stable plate for controlled placement and distribution of impact force. The oil bath bearings eliminate any scheduled greasing routine and extends the overall life of compactor.
What type of heavy construction equipment does Fastline provide?
We have a large catalog of new and used construction equipment for sale by the sellers, who we partner with.
Small Construction Equipment For Sale
Have a small scale construction project and in need of equipment to complete it? Fastline has you covered with our selection of mini excavators, skid steers, and tractor/backhoe loaders used for tasks such as lifting, digging, hauling materials, and grading.
Heavy Construction Equipment For Sale
For larger construction projects we offer heavy equipment such as bulldozers, dump trucks, wheel loaders, and cranes which are used for moving and lifting heavy objects, grading land, digging and moving materials.
Along with small and large scale construction equipment, Fastline provides many options for construction equipment attachments as well.
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.