2024 Ibex GA170DR
$7,999
236.3 miles away - TERRE HAUTE, IN
Galfre’s line of large drum mowers is designed for hay producers who want higher production rates and fewer problems in the field. With these machines you get high speed cutting and conditioning all in one machine, and with very few moving parts. The design of a drum mower is mechanically much simpler than sickle bars, disc mowers, discbines, and haybines. For nearly all applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. In the past, the only drawback of drum mowers was that they will windrow the cut crop into a tight pile that does not dry well. If you can imagine the cut grass stacked like a row of fallen dominoes, you have the idea of how conventional drum mowers windrow hay. This tight windrow cannot be directly baled because the underside will never dry. It needs to be spread out with a tedder to dry, and then raked into windrows. Galfre solved this problem with the introduction of their patent-pending Black Hole conditioning system. A series of teeth have been added to the neck of the cutter drum. These teeth provide a flailing action that breaks stems and ejects the hay out the back of the mower, spreading and fluffing it in the process. The result is a faster drydown time that rivals complicated and expensive haybines and discbines. The Black hole system has no moving parts. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. A simple breakaway system ensures that if you accidentally hit an unmovable object, the mower will swing rearward, avoiding damage. Simply back up to reset and you can continue mowing. These drum mowers use only 4 inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade takes only a few seconds. The only tool needed is stored right on the mower, so it is always with you. No bolts, no time consuming adjustments. Just change and go. The TM67C uses a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. Galfre has been in the agricultural equipment business for over 60 years. Their drum mowers have been in service in the US since the 70’s, with many of those original units still in use today. They have a proven design that has demonstrated its durability through years of use in the toughest conditions. Galfre’s manufacturing facilities use state of the art robotic welding and CNC machining for maximum accuracy and repeatability. Every drum is factory tested to be dynamically balanced, reducing vibration and prolonging machine life. When you buy Galfre hay equipment, you can count on a quality machine that will give you many years of trouble-free use.
2023 Ibex GA130LDR
$6,999
236.3 miles away - TERRE HAUTE, IN
The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. In the past, the only drawback of drum mowers was that they would windrow the cut crop into a tight pile that does not dry well. If you can imagine the cut grass stacked like a row of fallen dominoes, you have the idea of how conventional drum mowers windrow hay. This tight windrow cannot be directly baled because the underside will never dry. It needs to be spread out with a tedder to dry, and then raked into windrows. Our manufacturer, Galfre, solved this problem with the introduction of their patent-pending Black Hole conditioning system. A series of teeth have been added to the neck of the cutter drum. These teeth provide a flailing action that breaks stems and ejects the hay out the back of the mower, spreading and fluffing it in the process. The result is a faster drydown time that rivals complicated and expensive haybines and discbines. The Black hole system has no moving parts. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only three inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The TS51C uses a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. This machine is quality crafted by Galfre of Italy, with a proven design in use for over 20 years. Every drum is factory tested to be dynamically balanced, reducing vibration and prolonging machine life. When you buy this mower, you can count on a quality machine that will give you many years of trouble-free performance.
2019 Ibex BNF170
$6,499
236.3 miles away - TERRE HAUTE, IN
The TM67 drum mower is designed for tractors in the 30-50 horsepower range like the Kubota L Series. Designed with fewer moving parts than disc and sickle bar mowers, these machines will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only four inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The TM67 uses a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. This machine is quality crafted in Italy, with a proven design in use for over 20 years. Every drum is factory tested to be dynamically balanced, reducing vibration and prolonging machine life. When you buy this mower, you can count on a quality machine that will give you many years of trouble-free performance.
2019 Ibex BNF135
$5,999
236.3 miles away - TERRE HAUTE, IN
The TS53 drum mower is designed for the compact tractors so popular with today’s small farms. Designed with fewer moving parts than disc and sickle bar mowers, these machines will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only four inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. While other manufacturers continue to use belts between the main PTO and the drum gearbox, all of our drum mowers use a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. The TS53 also has a simple system for transport – no hydraulics required. Just release the breakaway system, manually swing the mower to the rear, and drop a pin in place to hold it there. This machine is quality crafted in Italy, with a proven design in use for over 20 years. Every drum is factory tested to be dynamically balanced, reducing vibration and prolonging machine life. When you buy this mower, you can count on a quality machine that will give you many years of trouble-free performance.
2023 Ibex DLDM165
$5,199
236.3 miles away - TERRE HAUTE, IN
The Ibex TM65E drum mower is designed for the compact tractors so popular with today’s small farms. Designed with fewer moving parts than disc and sickle bar mowers, these machines will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only three inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The Ibex TM65E also has a simple system for transport – no hydraulics required. Just release the breakaway system, manually swing the mower to the rear, and set the transport lock bar in place to hold it there. This mower is manufactured in China under the watchful eye of Ibex Equipment, a US based equipment company.
2019 Ibex BL115
$4,999
236.3 miles away - TERRE HAUTE, IN
The TX45 drum mower is designed for the small-framed tractors so popular with today’s landowner. Designed specifically for the lighter weight, narrower width, and smaller 3 point hitch of subcompact tractors, these mowers will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox. They use only four inexpensive, reversible blades per drum. The blades can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The TX45 uses a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. This machine is quality crafted in Italy, with a proven design in use for over 20 years. Every drum is factory tested to be dynamically balanced, reducing vibration and prolonging machine life. When you buy this mower, you can count on a quality machine that will give you many years of trouble-free performance.
2023 Ibex DLDM135
$4,699
236.3 miles away - TERRE HAUTE, IN
The Ibex TS53E drum mower is designed for the compact tractors so popular with today’s small farms. Designed with fewer moving parts than disc and sickle bar mowers, these machines will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only three inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The TS53 uses a durable shaft-driven system. Shaft drive means no belts to come off, slip, or break at the most inconvenient times. This mower is manufactured in China under the watchful eye of Ibex Equipment, a US based equipment company.
2023 Ibex DLDM125
$4,199
236.3 miles away - TERRE HAUTE, IN
The Ibex TX49E drum mower is designed for the compact tractors so popular with today’s small farms. Designed with fewer moving parts than disc and sickle bar mowers, these machines will cut faster and with fewer problems than other options. The design of a drum mower is mechanically much simpler than sickle bar and disc mowers. For nearly all hay cutting applications, it is a superior design that cuts faster with fewer problems. The drum mower design, which has been very prominent in Europe for decades, is finally gaining popularity here in the US, and rightly so. A drum mower has only two large counter-rotating drums. These drums create a great deal of inertia, helping you to power through the thickest hay conditions. The drums are powered from above by a simple gearbox, not with multiple small gears from below like a disc mower. These drum mowers use only three inexpensive, reversible blades per drum. They can be easily sharpened or simply replaced when dull. Replacing a blade is a simple process. This simplicity in design makes them easier to use and maintain, while also making them more durable. The Ibex TX49E also has a simple system for transport – no hydraulics required. Just release the breakaway system, manually swing the mower to the rear, and set the transport lock bar in place to hold it there. This mower is manufactured in China under the watchful eye of Ibex Equipment, a US based equipment company.
Filter by State
