Bush Hog DHM9
$5,500
390.8 miles away - FAYETTEVILLE, TN
10008I(I) Dealer Disclaimer: H & R Agri-Power used inventory pricing, hours, specifications and options shown are based on the original appraisal of the unit. If we discover a mistake prior to a signed sales order being executed, we reserve the right to correct said pricing, specifications, or options. Price excludes delivery, modifications, or any applicable taxes.
`
2022 Frontier GM1060
$2,400
390.8 miles away - FAYETTEVILLE, TN
10003I (I) Frame:Rigid Width (in feet):5 Number of blades per spindle:1 Hitch:Lift PTO Driveline:540 RPM Safety Shields Rear:Deflector Tires:Other You may also contact Justin Byrd at (931) 993-9946. Dealer Disclaimer: H & R Agri-Power used inventory pricing, hours, specifications and options shown are based on the original appraisal of the unit. If we discover a mistake prior to a signed sales order being executed, we reserve the right to correct said pricing, specifications, or options. Price excludes delivery, modifications, or any applicable taxes.
`
2010 Peruzzo PANTHER 1800
$9,900
374.1 miles away - LEWISBURG, TN
Here is a working 72" / 6’ Greensweeper 1800 by Peruzzo. It was parked by the owner when the left hydraulic cylinder broke and he never got around to replacing it and it has sat till now when they moved. We are selling it with the left cylinder replaced new and driveshaft complete in good working condition. If you buy it we will do a video of it working good before the buyer would send payment. This Flail Mower Green Collection Sweeper is in good working condition. 1,800 Litre Collection bin so 43 BUSHELS. The Greensweeper 1800: "It’s not just a mower, you can use it to thatch, sweep, mow, verticut and aerate. Peruzzo is the ultimate in profession turf care equipment, offering the most complete selection of flail collection mowers in the world. Patented sweep blades and exceptional rotor speed create suction and fine superior turf cut. Mows and picks up grass clippings leaves, plugs and small branches. Thatches, sweeps and verticuts in one pass with optional verticut blades installed." Height adjustment on rear roller and front castors for anti-scalp. Minimum maintenance and exposed grease zercs. HD overrun clutch gearbox. For comparison the current Peruzzo TIGER PRO FLAIL & SWEEPER COLLECTION MOWER 2800 Litre with a 78” width runs over $37,000 (link available). Financing and shipping available. SHIPPING: For regional and national delivery, we can put it on a pallet and a freight line truck or open trailer and go anywhere else in the U.S. with a $250 to $950 range depending on how far you are away from TN. Or feel free to arrange your own freight pick up using a freight line or a site like uShip. We have Docks and a Forklift on site.
`
2023 SkidPro QA724
$7,000
374.1 miles away - LEWISBURG, TN
For Sale is a Skid Pro QA724 24” inch Hydraulic High Flow Stump Grinder. The Kubota SVL97 Skid Steer is sold separately for $85,000 comes with a 66 in. HD Tooth Bucket. Specifications: *Rotor Size: 24 in. *Cutting Wheel Speed: 700 RPM *Cutting Depth (Blow Ground): 10 in. *Max Cutting Depth (Per Pass): 5 ft. *Max Horizontal Cut: 55 in. *Weight: 650 lbs. Features: *XL steel deflector limits flying debris *Cutting wheel shroud & frame is reinforced for long-term durability *XHD direct drive motor is built for the long haul & commercial use *Direct drive motor has built-in pressure relief, no chains or shear pins *Low profile design offers better visibility and safer operation *Mulcher style carbide tooth is more resistant to dulling than conventional style tooth for much longer wear life *Design has no max cutting height above ground, allowing for grinding in unique situations for added versatility SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 ATLAS MFG. SCD120
$6,445
374.1 miles away - LEWISBURG, TN
Available for order today our brand New 2024 Atlas SCD-120 10' Pull Behind / Drag Rotary Cutter. Depending on supplies. Factory order lead time is 1 week if not in stock. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. *U.S. Made with 2-Year Gearbox Warranty *Slip Clutch with Safety Chains Front and Rear *Dual Tail Wheels *Powder Coat Paint *12-Gauge HD Decks with Excellent Construction *Triple (3) Gear Boxes *Weight 2,220 lbs.. The 10’ 3-Point Hitch / Lift model TTSCL120 is $5,879. *ADD for Hydraulic Hose & Cylinder Kit $296. 3-Point Hitch Models also available in 8' sizes with same features (we do not offer a 8' pull behind model): 96” 8’ HD TTSCL96 Model with (3) 85 HP Gear Boxes, etc. (1,550 lbs.) $4,876. Minimum PTO HP Recommendations: 8' 3-Point Lift Model = 50 PTO HP. 10' 3-Point Lift Model = 60 PTO HP. 10' Drag Pull Model = 50 PTO HP (45 Min. PTO HP in medium and pasture type conditions). SHIPPING: Anywhere else in the U.S. with a $200 to $1,900 range depending on distance from TN. They are shipped in the upright position as shown with final assembly time estimated at 30 minutes to 1 hour. Financing is available with business and farm rates available 5% to 8% in general. Rates on consumer / personal equipment loans currently from 7% to 8% on good 650+ scores. We can also sometimes work with scores down to 550 at higher rates
`
2024 ATLAS MFG. SCL120
$5,879
374.1 miles away - LEWISBURG, TN
drivelineprotection: Slip Clutch, Mintractorptohorsepower (hp): 45, Mower Type: 3 Pt., New: New, numtailwheels: 2, Shippingweight (pounds): 2220, stumpjumper: Yes, Weight (pounds): 220, Width (inches): 120
`
2024 ATLAS MFG. SCL96
$4,876
374.1 miles away - LEWISBURG, TN
Available for order today our brand New 2024 Atlas SCL-96 8' Foot HD Rotary Cutter. Current factory lead time is about 1 weeks after deposit. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. NOTE: 8' and 10' Foot oversize cutters are sold and shipped in the upright position as the pictures show. The buyer is responsible for off loading from delivery trailer like on all cutter deliveries. On cutters shipped in the upright position the buyer will need to do some simple set up of the wheels and the hitch frame. *U.S. Made with 2-Year Gearbox Warranty *Slip Clutch with Safety Chains Front and Rear *Dual Tail Wheels *Powder Coat Paint *12-Gauge HD Decks with Excellent Construction *Triple (3) Gear Boxes *Weight 1,550 lbs.. The 10’ Pull Behind / Drag model TTSCD120 is $6,445. *ADD for Hydraulic Hose & Cylinder Kit $296. 3-Point Hitch Models also available in 10' sizes with same features (we do not offer a 8' pull behind model): 10’ SCL-120 Model 10' Foot, (3) 85 HP Gear Boxes, etc. (2,090 lbs.) $5,879.. 10’ SCD-120 Model 10' Foot, (3) 85 HP Gear Boxes, etc. (2,220 lbs.) $6,445. Minimum PTO HP Recommendations: 8' 3-Point Lift Model = 50 PTO HP. 10' 3-Point Lift Model = 60 PTO HP. 10' Drag Pull Model = 50 PTO HP (45 Min. PTO HP in medium and pasture type conditions). SHIPPING: Anywhere else in the U.S. with a $200 to $1,900 range depending on distance from TN. They are shipped in the upright position as shown with final assembly time estimated at 30 minutes to 1 hour. Financing is available with business and farm rates available 5% to 8% in general. Rates on consumer / personal equipment loans currently from 7% to 8% on good 650+ scores. We can also sometimes work with scores down to 550 at higher rates
`
2024 FARM-MAXX FFM205
$3,995
374.1 miles away - LEWISBURG, TN
Brand New Farm-Maxx FFM-205 3-Point Heavy Duty 79 in. Flail Mower. FarmMaxx FFM series flail mowers are built tough for years of dependable, economical service. These machines are perfect for tractors from 30-60 HP. Clean trouble free cutting and shredding are yours. Comes with 3 Year Gearbox Warranty. Factory order lead time is currently 2-3 weeks. NOTE: The photos and video used in the listing are of a 48" FFM120 so adjust the size accordingly for the larger 79" FFM205 model. *These are shipped directly from the factory warehouse and not at our Lewisburg warehouse. All of our FFM Flail Mower Models are: FFM-120 - 48 in. - 25-60 HP - 720 lbs. - $2,898.00 FFM-160 - 63 in. - 25-60 HP - 933 lbs. - $3,495.00 FFM-175 - 69 in. - 30-60 HP - 981 lbs. - $3,697.00 FFM-205 - 79 in. - 30-60 HP - 1,087 lbs. - $3,995.00 Specifications: *Working Width: 79 in. *Horsepower: 30-60 *Weight: 1,087 lbs. *Rotor Speed: 2,083 RPM *PTO Series: 5 *Hammers: 14 *Rake Tines: 13 *Belts: 4 *Hitch Cat.: Cat I & II *Manual Side Shift: N/A *Adjustable Skids: Standard *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Optional Hydraulic Side Shift Kit *Heavy Duty Heat Treated Steel Hammers *Adjustable Side skids *Standard Rear roller *Standard Adjustable Debris Rakes “The FFM Heavy Duty Flail Mowers offer durable performance in working widths from 48 to 89 inches. Even on uneven terrain, it shreds grass, weeds, and brush up to 2” in diameter. Robust, durable and easy to handle in tight areas, Farm-Maxx's FFM flail mowers are ideal for mowing along fences, in orchards and along ditch banks and ponds.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 FARM-MAXX FFM-175
$3,697
374.1 miles away - LEWISBURG, TN
Brand New Farm-Maxx FFM-175 3-Point Heavy Duty 69 in. Flail Mower. FarmMaxx FFM series flail mowers are built tough for years of dependable, economical service. These machines are perfect for tractors from 30-60 HP. Clean trouble free cutting and shredding are yours. Comes with 3 Year Gearbox Warranty. Factory order lead time is currently 2-3 weeks. NOTE: The photos and video used in the listing are of a 63" FFM160 so adjust the size accordingly for the larger 69" FFM175 model. *These are shipped directly from the factory warehouse and not at our Lewisburg warehouse. All of our FFM Flail Mower Models are: FFM-120 - 48 in. - 25-60 HP - 720 lbs. - $2,898.00 FFM-160 - 63 in. - 25-60 HP - 933 lbs. - $3,495.00 FFM-175 - 69 in. - 30-60 HP - 981 lbs. - $3,697.00 FFM-205 - 79 in. - 30-60 HP - 1,087 lbs. - $3,995.00 Specifications: *Working Width: 69 in. *Horsepower: 30-60 *Weight: 981 lbs. *Rotor Speed: 2,083 RPM *PTO Series: 5 *Hammers: 14 *Rake Tines: 11 *Belts: 4 *Hitch Cat.: Cat I & II *Manual Side Shift: N/A *Adjustable Skids: Standard *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Optional Hydraulic Side Shift Kit *Heavy Duty Heat Treated Steel Hammers *Adjustable Side skids *Standard Rear roller *Standard Adjustable Debris Rakes “The FFM Heavy Duty Flail Mowers offer durable performance in working widths from 48 to 89 inches. Even on uneven terrain, it shreds grass, weeds, and brush up to 2” in diameter. Robust, durable and easy to handle in tight areas, Farm-Maxx's FFM flail mowers are ideal for mowing along fences, in orchards and along ditch banks and ponds.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 FARM-MAXX FFM-160
$3,495
374.1 miles away - LEWISBURG, TN
Brand New Farm-Maxx FFM-160 3-Point Heavy Duty 63 in. Flail Mower. FarmMaxx FFM series flail mowers are built tough for years of dependable, economical service. These machines are perfect for tractors from 30-60 HP. Clean trouble free cutting and shredding are yours. Comes with 3 Year Gearbox Warranty. Factory order lead time is currently 2-3 weeks. *These are shipped directly from the factory warehouse and not at our Lewisburg warehouse. All of our FFM Flail Mower Models are: FFM-120 - 48 in. - 25-60 HP - 720 lbs. - $2,898.00 FFM-160 - 63 in. - 25-60 HP - 933 lbs. - $3,495.00 FFM-175 - 69 in. - 30-60 HP - 981 lbs. - $3,697.00 FFM-205 - 79 in. - 30-60 HP - 1,087 lbs. - $3,995.00 Specifications: *Working Width: 63 in. *Horsepower: 25-60 *Weight: 933 lbs. *Rotor Speed: 2,083 RPM *PTO Series: 5 *Hammers: 22 *Rake Tines: 10 *Belts: 4 *Hitch Cat.: Cat I & II *Manual Side Shift: Standard *Adjustable Skids: Standard *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Optional Hydraulic Side Shift Kit *Heavy Duty Heat Treated Steel Hammers *Adjustable Side skids *Standard Rear roller *Standard Adjustable Debris Rakes SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 A.T.L.A.S. MD785
$3,177
374.1 miles away - LEWISBURG, TN
drivelineprotection: Slip Clutch, Mintractorptohorsepower (hp): 45, Mower Type: 3 Pt., New: New, quickhitchcompatible: Yes, stumpjumper: Yes, Weight (pounds): 980
`
2024 FARM-MAXX FFM120
$2,898
374.1 miles away - LEWISBURG, TN
Brand New Farm-Maxx FFM-120 3-Point Heavy Duty 48 in. Flail Mower. FarmMaxx FFM series flail mowers are built tough for years of dependable, economical service. These machines are perfect for tractors from 25-60 HP. Clean trouble free cutting and shredding are yours. Comes with 3 Year Gearbox Warranty. Factory order lead time is currently 2-3 weeks. NOTE: The photos and video used in the listing are of a 48" FFM120 so adjust the size accordingly for the larger 69" FFM175 model. *These are shipped directly from the factory warehouse and not at our Lewisburg warehouse. All of our FFM Flail Mower Models are: FFM-120 - 48 in. - 25-60 HP - 720 lbs. - $2,898.00 FFM-160 - 63 in. - 25-60 HP - 933 lbs. - $3,495.00 FFM-175 - 69 in. - 30-60 HP - 981 lbs. - $3,697.00 FFM-205 - 79 in. - 30-60 HP - 1,087 lbs. - $3,995.00 Specifications: *Working Width: 48 in. *Horsepower: 25-60 *Weight: 720 lbs. *Rotor Speed: 2,083 RPM *PTO Series: 5 *Hammers: 14 *Rake Tines: 7 *Belts: 4 *Hitch Cat.: Cat I & II *Manual Side Shift: N/A *Adjustable Skids: Standard *Driveline Protection: Overrun *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Optional Hydraulic Side Shift Kit *Heavy Duty Heat Treated Steel Hammers *Adjustable Side skids *Standard Rear roller *Standard Adjustable Debris Rakes “The FFM Heavy Duty Flail Mowers offer durable performance in working widths from 48 to 89 inches. Even on uneven terrain, it shreds grass, weeds, and brush up to 2” in diameter. Robust, durable and easy to handle in tight areas, Farm-Maxx's FFM flail mowers are ideal for mowing along fences, in orchards and along ditch banks and ponds.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 A.T.L.A.S. MD685
$2,654
374.1 miles away - LEWISBURG, TN
drivelineprotection: Slip Clutch, Mower Type: 3 Pt., New: New, quickhitchcompatible: Yes, stumpjumper: Yes, Weight (pounds): 945
`
2024 FARM-MAXX FL165
$2,625
374.1 miles away - LEWISBURG, TN
For sale Brand New 2024 Farm-Maxx FL-165 65 Inch Flail Mowers. Comes with 3 Year Gearbox Warranty. This flail mower is perfect for compact tractors. Factory order lead time is currently 2-3 weeks. NOTE: The photos used in the listing may not be how an actual FL-165 model looks like. Specifications: *Working Width: 65 in. *Horsepower: 25- 40 HP *Weight: 518 lbs. *PTO: 540 *Hammer/Knives: 26/56 *Belts: 3 *Hitch Category: Cat. l *Adjustable Skids: Standard *Driveline Protection: Overrun *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Hammers or Y Blades *Central Gearbox Equipped with Free Wheel Clutch (540 RPM) *Adjustable Side Skids *Standard Rear Roller *Standard Adjustable Debris Rakes We also sell brand new Farm-Maxx FL Series 41” and 49” Flail Mowers. FL-105 - 41 in. - 20-30 HP - 287 lbs. - $2,075.00 FL-125 - 49 in. - 20-35 HP - 353 lbs. - $2,197.00 “FL Flail Mowers are designed to ensure even and precise cutting and shredding of materials, thanks to a sturdy construction and high-quality components. The FL flail mower range is suitable for tractors from 12 hp to 35hp with category 1 hitch. It’s recommended for weekend farmers and gardening. The FL mower is compact and light, a perfect choice for sub-compact or compact tractors. It is equipped with hammers and with a set of knives. The FL models is synonymous with reliability and quality thanks to a careful production process and strict quality controls. With the Farm-Maxx FL Flail Mowers, all types of soil are professionally and precisely worked.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 CF Power Line FMN210
$2,236
374.1 miles away - LEWISBURG, TN
Powerline TTPFLMN2107 7' Foot Rear Discharge Finish Mower - $2,236.00 The last five pictures are of the Powerline FMN180 6' foot finish mower. Features: • 4 independent heigh adjustable castor wheels allow the mower to contour over uneven surfaces to provide an even finish • 3 high strength cutting blades for a more precision finish • Floating top hitch to increase surface contouring • 7’ FM7 Model comes standard with anti-scalping wheel as shown in photo • ALL SIZE MOWERS ARE RED IN COLOR • With 60-day manufacturer’s warranty to be free from defects SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 FARM-MAXX FL125
$2,197
374.1 miles away - LEWISBURG, TN
For sale Brand New 2024 Farm-Maxx FL-125 49 Inch Flail Mowers. Comes with 3 Year Gearbox Warranty. This flail mower is perfect for compact tractors. Factory order lead time is currently 2-3 weeks. NOTE: The photos used in the listing may not be how an actual FL-125 model looks like. Specifications: *Working Width: 49 in. *Horsepower: 20-35 HP *Weight: 353 lbs. *PTO: 540 *Hammer/Knives: 20/40 *Belts: 3 *Hitch Category: Cat. l *Adjustable Skids: Standard *Driveline Protection: Overrun *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Hammers or Y Blades *Central Gearbox Equipped with Free Wheel Clutch (540 RPM) *Adjustable Side Skids *Standard Rear Roller *Standard Adjustable Debris Rakes We also sell brand new Farm-Maxx FL Series 41” and 65” Flail Mowers. FL-105 - 41 in. - 20-30 HP - 287 lbs. - $2,075.00 FL-165 - 64 in. - 25-40 HP - 518 lbs. - $2,625.00 “FL Flail Mowers are designed to ensure even and precise cutting and shredding of materials, thanks to a sturdy construction and high-quality components. The FL flail mower range is suitable for tractors from 12 hp to 35hp with category 1 hitch. It’s recommended for weekend farmers and gardening. The FL mower is compact and light, a perfect choice for sub-compact or compact tractors. It is equipped with hammers and with a set of knives. The FL models is synonymous with reliability and quality thanks to a careful production process and strict quality controls. With the Farm-Maxx FL Flail Mowers, all types of soil are professionally and precisely worked.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 FARM-MAXX FL105
$2,075
374.1 miles away - LEWISBURG, TN
For sale Brand New 2024 Farm-Maxx FL-105 41 Inch Flail Mowers. Comes with 3 Year Gearbox Warranty. This flail mower is perfect for compact tractors. Factory order lead time is currently 2-3 weeks. NOTE: The photos used in the listing may not be how an actual FL-105 model looks like. Specifications: *Working Width: 41 in. *Horsepower: 20-30 HP *Weight: 287 lbs. *PTO: 540 *Hammer/Knives: 18/36 *Belts: 3 *Hitch Category: Cat. l *Adjustable Skids: Standard *Driveline Protection: Overrun *Rear Roller: Standard Standard Features: *Standard Mechanical Side Shift *Hammers or Y Blades *Central Gearbox Equipped with Free Wheel Clutch (540 RPM) *Adjustable Side Skids *Standard Rear Roller *Standard Adjustable Debris Rakes We also sell brand new Farm-Maxx FL Series 49” and 65” Flail Mowers. FL-125 - 49 in. - 20-35 HP - 353 lbs. - $2,197.00 FL-165 - 65 in. - 25-40 HP - 518 lbs. - $2,625.00 “FL Flail Mowers are designed to ensure even and precise cutting and shredding of materials, thanks to a sturdy construction and high-quality components. The FL flail mower range is suitable for tractors from 12 hp to 35hp with category 1 hitch. It’s recommended for weekend farmers and gardening. The FL mower is compact and light, a perfect choice for sub-compact or compact tractors. It is equipped with hammers and with a set of knives. The FL models is synonymous with reliability and quality thanks to a careful production process and strict quality controls. With the Farm-Maxx FL Flail Mowers, all types of soil are professionally and precisely worked.” SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2009 John Deere 1008
$1,950
374.1 miles away - LEWISBURG, TN
Here for sale is a good 10’ Ft. / 120” John Deere 1008 Rotary Cutter Bush Hog. This 1008 is a standard 540 RPM PTO pull type drag cutter. This good original 10 Foot bush hog has a lot of new parts but after they were installed this spring then this summer the left gear box splines are now bad so it needs that now. The farmer since he is 80 decided to just go ahead and get a new 8’ cutter since that was a better size for his reduced acres now. He also noted this cutter mowed great. His brother was always saying how much better this 1008 cutter was than the one he owned and how better the fields looked compared to his. The recent new parts included a new drive shaft this spring and a new hydraulic cylinder. All the hoses are good and one of the two is like new the other still has all the rubber coating on it. This is a good, solid old school built cutter one of the better ones John Deere made. The deck is solid too. U.S. Delivery available from TN for just $.85 mile one-way if over 500 miles. Local / regional delivery $1-$3 per mile one-way. rc10 rc10r rc10m mx10 hx10 ts10 We will consider trades of tractors, construction equipment, dozers, skid loaders, utv's.
`
2024 CF Power Line FMN180
$1,932
374.1 miles away - LEWISBURG, TN
Powerline TTPFLMN1806 6' Foot Rear Discharge Finish Mower - $1,932.00 Features: • 4 independent heigh adjustable castor wheels allow the mower to contour over uneven surfaces to provide an even finish • 3 high strength cutting blades for a more precision finish • Floating top hitch to increase surface contouring • 7’ FM7 Model comes standard with anti-scalping wheel as shown in photo • ALL SIZE MOWERS ARE RED IN COLOR • With 60-day manufacturer’s warranty to be free from defects SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 ATLAS MFG. AGRIX6
$1,757
374.1 miles away - LEWISBURG, TN
Brand New 6 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,641. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2024 ATLAS MFG. AGRIX6
$1,641
374.1 miles away - LEWISBURG, TN
U.S. Made with a 2 Year Gearbox Guaranty. These 6 ft. Shear Bolt shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,757. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2024 CF Power Line FMN150
$1,628
374.1 miles away - LEWISBURG, TN
Tractor Town Powerline TTPFLMN1505 5' Foot Rear Discharge Finish Mower - $1,628.00 The last five pictures are of the Powerline FMN180 6' foot finish mower. Features: • 4 independent height adjustable castor wheels allow the mower to contour over uneven surfaces to provide an even finish • 3 high strength cutting blades for a more precision finish • Floating top hitch to increase surface contouring • 7’ FM7 Model comes standard with anti-scalping wheel as shown in photo • ALL SIZE MOWERS ARE RED IN COLOR • With 60-day manufacturer’s warranty to be free from defects SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 ATLAS MFG. AGRIX5
$1,555
374.1 miles away - LEWISBURG, TN
Brand New 5 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,441. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2024 CF Power Line FMN120
$1,550
374.1 miles away - LEWISBURG, TN
Tractor Town Powerline TTPLFMN1204 4' Foot Rear Discharge Finish Mower - $1,550.00 Features: • 4 independent height adjustable castor wheels allow the mower to contour over uneven surfaces to provide an even finish • 3 high strength cutting blades for a more precision finish • Floating top hitch to increase surface contouring • 7’ FM7 Model comes standard with anti-scalping wheel as shown in photo • ALL SIZE MOWERS ARE RED IN COLOR • With 60-day manufacturer’s warranty to be free from defects SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 ATLAS MFG. AGRIX5
$1,441
374.1 miles away - LEWISBURG, TN
Brand New 5 ft. Shear Bolt Rotary Cutters are for sale direct from our U.S. factory. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,555. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2024 ATLAS MFG. AGRIX4
$1,441
374.1 miles away - LEWISBURG, TN
Brand New 4 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,311. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2015 Mahindra EMAX 25M
$1,370
374.1 miles away - LEWISBURG, TN
For Sale is this Mahindra EMAX25M Mid-Mount Belly Mower. This mower came off a Mahindra eMax22s Tractor. This also fits Mahindra eMax25 Tractors and maybe more. The tractor in the pictures is not for sale. Specifications: *Cutting Width: 60 in. *Overall Width: 74 in. *Cutting Height Range: 2-4 in. *Number of Blades: 3 *Blade Length: 21 in. *Blade Thickness: 1/4 in. Shipping Weight of Base 60" Deck and Mounting: 411 lbs. SHIPPING: Can palletize and ship in the U.S. for $250 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2024 ATLAS MFG. AGRIX4
$1,311
374.1 miles away - LEWISBURG, TN
U.S. Made with a 5 Year Gearbox Guaranty. These 4 ft. Shear Bolt shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,441. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
2010 John Deere 370
$950
374.1 miles away - LEWISBURG, TN
Here for sale an hour south of Nashville, TN is a 7.5 Feet Wide John Deere #370 Flail Mower Shredder that is missing it’s drive shaft, gear box and side shield. These new retail for over $4,400 plus tax. Generic gear boxes are available along with drive shafts. We bought a drive shaft just like the one needed for this 370 and paid just over $100 last month. 7 ft. 6in. Width (90 inches) Recommended 40 - 75 HP and either a Cat. 1 & Cat. 2 Hitch. Whether you are looking to maintain your pasture, shred stalks or mow along Roadsides, parks and school grounds, the #370 Heavy-duty cutting Flail Mower is ready to meet your needs. Background information on Flail Mowers: “A flail will cut at the same speed as a rotary. Flails can do in one pass what a rotary would need 2 passes to get the same finish. Flails leave a very even discharge across the full width without anything to block the cuttings and have full width roller to prevent scalping. Flail pick up the grass that has been laid down by the tractor’s tires, resulting in an even cut.” Message the number below and we will send you the video links. BLADES: When you design or buy a new flail mower, you usually will get a choice of the Y Knife Blades or Hammer Blades. The Y-Blades are great when cutting tall weeds and overgrowth and can also offer a nice cut to your lawn. However, if you need to cut tree saplings and dense overgrowth, flail hammer blades are used, which are wider, heavier blades than the Y-blades. No matter Flail hammer blades or Y knife blades, either set of blades will make a perfect solution for cutting. We guess the year to be 2010, but we are not sure. SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
2010 King Kutter L60-40-P
$840
374.1 miles away - LEWISBURG, TN
For Sale King Kutter L60-40-RT 60-inch Rotary Cutter. “KING KUTTER'S "PATENTED" FLEX HITCH ROTARY KUTTER demonstrates the latest in Rotary Kutter innovation, and it’s only available from King Kutter Inc. The Cat. 1 quick hitch-able, flex hitch design, is unlike anything on the market today. The unique hitch allows it to roll 15 Degrees up or down, on the left or right side of the machine. This feature allows the Flex Hitch Rotary Kutter to follow the contours of your field like no Rotary Kutter before. The domed deck design sheds water and debris to prevent material from collecting on the deck. Whether mowing pastures, roadsides, parks, or easements, the King Kutter Flex Hitch Rotary Kutter is perfect Kutter for you.” Specifications: *Cutting Width: 5 ft. *Category 1 Quick Hitch Compatible Flex Hitch System *Domed Deck *"I" Beam Side Rails *Heavy-Duty Cast-Iron Gearbox *Adjustable Laminated Tail Wheel *Shielded PTO Shaft W/ Shear Pin *Heavy, Forged, Heat Treated Blades SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
`
of 4
Filter by State
