Select listings to compare them
12 Listings Found
List View Grid View
View Filters

2024 ATLAS MFG. SCD120

$6,445

568.4 miles away - LEWISBURG, TN
Available for order today our brand New 2024 Atlas SCD-120 10' Pull Behind / Drag Rotary Cutter. Depending on supplies. Factory order lead time is 1 week if not in stock. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. *U.S. Made with 2-Year Gearbox Warranty *Slip Clutch with Safety Chains Front and Rear *Dual Tail Wheels *Powder Coat Paint *12-Gauge HD Decks with Excellent Construction *Triple (3) Gear Boxes *Weight 2,220 lbs.. The 10’ 3-Point Hitch / Lift model TTSCL120 is $5,879. *ADD for Hydraulic Hose & Cylinder Kit $296. 3-Point Hitch Models also available in 8' sizes with same features (we do not offer a 8' pull behind model): 96” 8’ HD TTSCL96 Model with (3) 85 HP Gear Boxes, etc. (1,550 lbs.) $4,876. Minimum PTO HP Recommendations: 8' 3-Point Lift Model = 50 PTO HP. 10' 3-Point Lift Model = 60 PTO HP. 10' Drag Pull Model = 50 PTO HP (45 Min. PTO HP in medium and pasture type conditions). SHIPPING: Anywhere else in the U.S. with a $200 to $1,900 range depending on distance from TN. They are shipped in the upright position as shown with final assembly time estimated at 30 minutes to 1 hour. Financing is available with business and farm rates available 5% to 8% in general. Rates on consumer / personal equipment loans currently from 7% to 8% on good 650+ scores. We can also sometimes work with scores down to 550 at higher rates
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. SCL120

$5,879

568.4 miles away - LEWISBURG, TN
drivelineprotection: Slip Clutch, Mintractorptohorsepower (hp): 45, Mower Type: 3 Pt., New: New, numtailwheels: 2, Shippingweight (pounds): 2220, stumpjumper: Yes, Weight (pounds): 220, Width (inches): 120
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. SCL96

$4,876

568.4 miles away - LEWISBURG, TN
Available for order today our brand New 2024 Atlas SCL-96 8' Foot HD Rotary Cutter. Current factory lead time is about 1 weeks after deposit. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. *U.S. Made with 2-Year Gearbox Warranty *Slip Clutch with Safety Chains Front and Rear *Dual Tail Wheels *Powder Coat Paint *12-Gauge HD Decks with Excellent Construction *Triple (3) Gear Boxes *Weight 1,550 lbs.. The 10’ Pull Behind / Drag model TTSCD120 is $6,445. *ADD for Hydraulic Hose & Cylinder Kit $296. 3-Point Hitch Models also available in 10' sizes with same features (we do not offer a 8' pull behind model): 10’ SCL-120 Model 10' Foot, (3) 85 HP Gear Boxes, etc. (2,090 lbs.) $5,879.. 10’ SCD-120 Model 10' Foot, (3) 85 HP Gear Boxes, etc. (2,220 lbs.) $6,445. Minimum PTO HP Recommendations: 8' 3-Point Lift Model = 50 PTO HP. 10' 3-Point Lift Model = 60 PTO HP. 10' Drag Pull Model = 50 PTO HP (45 Min. PTO HP in medium and pasture type conditions). SHIPPING: Anywhere else in the U.S. with a $200 to $1,900 range depending on distance from TN. They are shipped in the upright position as shown with final assembly time estimated at 30 minutes to 1 hour. Financing is available with business and farm rates available 5% to 8% in general. Rates on consumer / personal equipment loans currently from 7% to 8% on good 650+ scores. We can also sometimes work with scores down to 550 at higher rates
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX6

$1,757

568.4 miles away - LEWISBURG, TN
Brand New 6 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,641. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX6

$1,641

568.4 miles away - LEWISBURG, TN
U.S. Made with a 2 Year Gearbox Guaranty. These 6 ft. Shear Bolt shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,757. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX5

$1,555

568.4 miles away - LEWISBURG, TN
Brand New 5 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,441. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX5

$1,441

568.4 miles away - LEWISBURG, TN
Brand New 5 ft. Shear Bolt Rotary Cutters are for sale direct from our U.S. factory. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,555. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX4

$1,441

568.4 miles away - LEWISBURG, TN
Brand New 4 ft. Slip Clutch Rotary Cutters are for sale direct from our U.S. factory. These are medium standard duty cutters with a cut capacity up to 1/2" in. thick grass and small saplings. U.S. Made with a 2 Year Gearbox Guaranty. These shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Slip Clutch (SC) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Slip Clutch (SC) version. For the Shear Bolt (SB) version it is $1,311. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

2024 ATLAS MFG. AGRIX4

$1,311

568.4 miles away - LEWISBURG, TN
U.S. Made with a 5 Year Gearbox Guaranty. These 4 ft. Shear Bolt shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper. *As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,441. Check our other website link on those for more information but the cutter decks are otherwise exactly the same. The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use: • Sturdy one-piece heavy 12-gauge steel frame. • Reinforced weldments are added at stress points. • The blade carrier is formed from a one-piece 12-gauge steel plate. • The blade carrier has a 5/8" bar welded for extra strength and durability. • The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power. • The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action. • The adjustable tail wheel gives you a variety of cutting heights. • The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe. • The PTO shaft has needle bearings in the cross joint and grade 2 shear pins. • The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut." * Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care. Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).
`
Dealer Info
Tractor Town Equipment
LEWISBURG, TN
568.4 miles away

ATLAS MFG. AGRIX5

$1,250

620.2 miles away - MURRAY, KY
`
Dealer Info
DIXON FARM EQUIPMENT
MURRAY, KY
620.2 miles away

2023 ATLAS MFG. AGRIX5

$1,990

2256.3 miles away - REDMOND, OR
Agri-X 5' Rotary Cutter with Slip Clutch One Piece Deck Folded to Make Sides Stronger with Underneath Skids Added – 12 gauge decking •One(1) Year Limited Warranty on Gearbox •Powder Coat Paint •Stump Jumper •Adjustable Tailwheel •Hole in Deck for Easy Blade Replacement •Two Brace to the Rear with Flex Point Built In
`
Dealer Info
BRIM TRACTOR
REDMOND, OR
2256.3 miles away

2023 ATLAS MFG. AGRIX5

$1,990

2256.3 miles away - REDMOND, OR
Agri-X 5' Rotary Cutter with Slip Clutch One Piece Deck Folded to Make Sides Stronger with Underneath Skids Added – 12 gauge decking •One(1) Year Limited Warranty on Gearbox •Powder Coat Paint •Stump Jumper •Adjustable Tailwheel •Hole in Deck for Easy Blade Replacement •Two Brace to the Rear with Flex Point Built In
`
Dealer Info
BRIM TRACTOR
REDMOND, OR
2256.3 miles away