| NEW TORO HIGH TORQUE AUGER POWER HEAD (MODEL 22805)
- Designed for large auger bits up to 30"
- High Torque (Power) Drive for the most demanding conditions
- Direct planetary drive: In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo's capability to dig 30" holes up to 6' deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.
Single Directional Pivot: Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.
Horizontal Lockout: The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.
High Torque Drive: The high torque drive provides a tremendous 1515 ft-lbs. of torque at 3000 psi with a bit speed of 57 rpm to break through the toughest ground.
Planetary Gear Drive: The planetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.
Auger Speed 57 rpm @11gpm (41.6 lpm), 95% efficiency
Height 22", Length 24", Width 24", Weight 182 lbs.
Shaft 2-9/16" round
Torque 1515 ft-lb @3000psi, @11gpm (461 m-kg @ 207 Bar, @ 72 lpm)
- Auger Bits (sold separately) are available in 6" 9" 12" 15" 18" 24" 30". Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flighting’s are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 3/8" (1 cm) thick continuous steel where many other augers are 1/8" (3 mm) thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.
- Cement Bowl: Haul, mix, and pour up to 200 lbs. (dry) cement. Eliminates hand mixing.
- Carbide Teeth & Pilot: For the most demanding conditions, Toro has carbide tooth and pilot options: Wisdom tooth (part number 104-5996) Chisel tooth (part number 104-5997) Hard face Pilot (part number 104-5998)
THE SOURCE FOR ALL YOUR COMPACT AND OUTDOOR EQUIPMENT NEEDS
Tri-State Bobcat is a family-owned and operated company and one of the premier Bobcat dealers in the United States. Since 1983, we've proudly served a wide range of markets including construction, landscaping, grounds and property maintenance, agriculture, tree care, land clearing, and erosion control --with equipment sales and rentals from four convenient locations in Minnesota and Wisconsin.
In addition to new and pre-owned Bobcat equipment, our inventory includes skid loaders, wheel loaders, trenchers, mulching tractors, wood chippers, stump grinders, dump trailers, concrete buggies, compactors, aerators, snowblowers, attachments from Bobcat, Toro, STIHL, Avant, Bandit, BOMAG, Kage, Fecon, Virnig, Wacker Neuson, Husqvarna, BOSS, Green Climber, RedMax, and H&H Trailers.
We invite you to visit our state-of-the-art facilities in Burnsville, MN, Little Canada, MN, St. Croix Falls, WI, and Hudson, WI to see our huge showrooms, expanded parts departments, numerous service bays, and large yards full of new, used, and rental equipment. Our knowledgeable and friendly staff is committed |
