2025 H&S 3231
$34,115.00 USD
CONTACT DEALER
DEALER INFO
MONROE TRACTOR
1085 SANDY LAKE RD
GROVE CITY, PA 16127
DETAILS
| Price | $34,115.00 USD |
| Year | 2025 |
| Make | H&S |
| Model | 3231 |
| Stock # | H067964 |
| Serial # | 522MS31016 |
| Capacity (cubic foot) | 164.58 |
| Capacitydryvolume (bushel) | 310 |
| dischargelocation | Rear |
| endgate | Yes |
| endgatetype | Hydraulic |
| Floor Type | Steel |
| Heapedcapacity (cubic foot) | 284.39 |
| hitchtype | Pull-Type |
| New | New |
| PTO (RPM) | 1000 |
| PTO Size | 1 3/8 |
| sidematerial | Steel |
| soldwithcarrier | Yes |
| spreaderconfiguration | Horizontal Beaters |
| warrantytype | Original |
Description
| The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5″ U-channel side members. Compares with any on the market. The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel. Sides, front panel and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up. Solid virgin grade poly floor allows for considerably less torque to move a heavy load. The two-speed apron drive is standard equipment. The 29″ diameter beater has two styles of replaceable beater paddles. Half of the 14 beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater-side wiper blades are also standard equipment. The hydraulic endgate features a single cylinder with the hydraulic lines running through a 3″ x 3″ tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points. Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service. Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt. The beater drive gear box is 1:1.5 bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut-off. The apron drive is a 50:1 bronze worm gear with shear bolt protection. PTO Apron Low Speed/540 RPMs: 4′ 8.5″ per minute. PTO Apron High Speed/540 RPMs: 8′ 8.5″ per minute A front splash guard is standard equipment. Greaseable bearings |
FEATURED LISTINGS
2020 Meyer SXI865
HOMAN INC.
2024 Chandler Truck Mount Poultry Litter Spreader
CHANDLER EQUIPMENT CO.
2026 Artex SBX800
KEAST ENTERPRISES
2019 Kuhn Knight SLC132
D&D Farm Supply
2013 Vermeer Mfg. Co. RTX750
D & B CONSTRUCTION EQUIPMENT
John Deere 1780
RICK HAWKINS EQUIPMENT SALES - Consignment
2025 Land Pride SBP1674
IMPORT TEST H
2013 John Deere 9560R
Sydenstricker Nobbe Partners (CAZENOVIA, NY)
2012 Amadas 2110
SUNSOUTH LLC
2016 John Deere 7210R
The Hydra
The quoting activity is handled by Nationwide Transport. Data submitted through the form is sent to Nationwide Transport. Fastline is not involved in that process and any questions and/or concerns should be directed to Nationwide Transport.
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.
Thank You!
Your offer has been sent.
You have successfully placed an offer on a piece of equipment. The dealer will contact you directly if the offer is accepted.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.