$94,000
1010.3 miles away - MANDAN, ND
Call For Availability & Updated Meter Readings - Meter Readings Are Estimates Only, Stored Inside, Double Knife Drive, 40' Flex Draper, CNH Flagship Adapter w/21 Spline Drive Shaft, Gauge Wheels, Hydraulic Knife Tilt
$124,900
319.2 miles away - WAYNE CITY, IL
Platform Size: 40 Feet
Platform Kind: Flex/Draper
JOHN DEERE HD40F, 40' HINGED FRAME FLEXIBLE KNIFE DRAPER PLATFORM, 2024, in cab cutting height control for both ON ground and OFF ground operation, contour master telescopic drive shaft, hydraulic wing leveling, 4-27x10.50-15 ACTIVE rear stabilizer wheels, dual knife drive, 4" double cut coarse tooth knife, extended wear knife guards, FLIP OVER poly tine pickup reel, hyd fore/aft with resume, dial-a-speed reel control, hydraulic reel drive, short poly divider points, 40" wide GRAIN SAVER side draper belts w/speed sensors, high wear poly skid shoes, standard center belt, stubble lights & road transport lights, requires combines with minimum 3.15" (80mm) lift cylinders (3.5", 90mm recommended), also requires HD fore/aft tilt cylinders & lateral tilt cylinders, single point hyd/electrical hookup, compatible with JD model year 2020+, "S" series combines. Last operated on 2024, S790 combine.
$134,900
317.3 miles away - NORRIS CITY, IL
Platform Size: 45 Feet
Platform Kind: Flex/Draper
JOHN DEERE HD45F, 45' HINGED FRAME FLEXIBLE KNIFE DRAPER PLATFORM, 2024, in cab cutting height control for both ON ground and OFF ground operation, contour master telescopic drive shaft, hydraulic wing leveling, 4-27x10.50-15 ACTIVE rear stabilizer wheels, dual knife drive, 4" double cut coarse tooth knife, extended wear knife guards, FLIP OVER poly tine pickup reel, hyd fore/aft with resume, dial-a-speed reel control, hydraulic reel drive, short poly divider points, 40" wide GRAIN SAVER side draper belts with speed sensors and belt protection system, high wear poly skid shoes, standard center belt, stubble lights & road transport lights, requires combines with minimum 3.15" (80mm) lift cylinders (3.5", 90mm recommended), also requires HD fore/aft tilt cylinders & lateral tilt cylinders, single point hyd/electrical hookup, compatible with JD model year 2020+, "S" series combines. Last operated on 2024, S790 combine. FULL JD
Dealer Info
Sydenstricker Nobbe Partners (NORRIS CITY, IL)
NORRIS CITY, IL
317.3 miles away
$99,900
344.2 miles away - BENTON, IL
Platform Size: 45 Feet
Platform Kind: Flex/Draper
JOHN DEERE RD45F HYDRA-FLEX 45' DRAPER PLATFORM, 2023, 7.5" hydra-flex float system, contour master telescopic drive shaft, header height sensing in FLEX & RIGID modes, dual knife drive, 4" double cut coarse knife, short extended wear knife guards, FLIP OVER poly tine pickup reel, hyd fore/aft with resume, dial-a-speed reel control, hydraulic reel drive, standard center belt, 40" wide Grain Saver side draper belts w/speed sensors & auto belt speed protection, increased cut height poly skid shoes, stubble lights, single point electro/hydraulic coupler, road transport lights, compatible with JD model 2020+ S700 combines.
$94,000
1010.3 miles away - MANDAN, ND
Call For Availability & Updated Meter Readings - Meter Readings Are Estimates Only, Stored Inside, Double Knife Drive, 40' Flex Draper, CNH Flagship Adapter w/21 Spline Drive Shaft, Gauge Wheels, Hydraulic Knife Tilt
$29,900
625.3 miles away - BLUE EARTH, MN
Platform Size: 40 Feet
Platform Kind: Flex/Draper
40'/Flex Draper/Finger reel with flip over bundle/Poly/50%/John Deere Frame
$244,900
302.0 miles away - PONTIAC, IL
Number of Rows: 16
Header Row Spacing: 30
2023 JOHN DEERE C16F FOLDING CORN HEAD, 16 ROW, 30" SPACING, STALKMASTER-CHOPPING, STALK DEFLECTORS, ACTIVE END FENDERS, INTERMESHING KNIFE STALK ROW
$214,900
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
2025 JOHN DEERE C18F, 20" ROW SPACING, NON STALKMASTER, X SERIES CARRIER, STALK DEFLECTOR ON ALL ROWS ACTIVE END FENDERS 9 PIN CONTROLLER OPPOSED KNIFE STALK ROLLS, AVAILABLE JANUARY 2026
$214,900
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
2025 JOHN DEERE C18F, 20" ROW SPACING, NON STALKMASTER, X SERIES CARRIER, STALK DEFLECTOR ON ALL ROWS ACTIVE END FENDERS 9 PIN CONTROLLER OPPOSED KNIFE STALK ROLLS, AVAILABLE JANUARY 2026
$214,900
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
2025 JOHN DEERE C18F, 20" ROW SPACING, NON STALKMASTER, X SERIES CARRIER, STALK DEFLECTOR ON ALL ROWS ACTIVE END FENDERS 9 PIN CONTROLLER OPPOSED KNIFE STALK ROLLS, AVAILABLE JANUARY 2026
$208,940
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
Number of Rows: 18, Header Row Spacing: 20, New: Used, Other: STALK STOMPERS, ACTIVE END FENDERS, OPPOSED KNIFE STALK ROWS, Standard Warranty thru: 6/1/2025
$208,700
406.9 miles away - MONMOUTH, IL
Number of Rows: 16
Header Row Spacing: 30
2023 JOHN DEERE C16F, STALKMASTER, 30" SPACING, X SERIES CARRIER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, OPPOSED KNIFE ROLLS, AVAILABLE MARCH 2026
$206,910
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
2023 JOHN DEERE C18F CORN HEAD, 20" Row Spacing X Series Combine Active End Fenders Opposed Knife
$206,910
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
2023 JOHN DEERE C18F CORN HEAD, 20" Row Spacing X Series Combine Active End Fenders Opposed Knife
$206,390
655.8 miles away - PITTSBURG, KS
Number of Rows: 18
Header Row Spacing: 20
Number of Rows: 18, Header Row Spacing: 20, New: Used, Other: STALK STOMPERS, ACTIVE END FENDERS, OPPOSED KNIFE STALK ROWS, StalkMaster: No, Standard Warranty thru: 6/1/2025
$174,900
391.6 miles away - GALESBURG, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: SHORT POINTS BUNDLE, ROWMAX CHOPPING STALK ROLL, StalkMaster: No
$174,900
391.6 miles away - GALESBURG, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: SHORT POINTS BUNDLE, ROWMAX CHOPPING STALK ROLL, 9 PIN CONTROLLER, StalkMaster: No
$169,900
328.1 miles away - ROANOKE, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING ROLLS, AVAILABLE JULY 2025
$169,900
372.6 miles away - KEWANEE, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING KNIFE ROLLS, AVAILABLE JUNE 2025
$169,900
365.9 miles away - BRIMFIELD, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING KNIFE ROLLS, AVAILABLE JUNE 2025
$169,900
365.9 miles away - BRIMFIELD, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING KNIFE ROLLS, AVAILABLE JUNE 2025
$169,900
365.9 miles away - BRIMFIELD, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING KNIFE ROLLS, AVAILABLE JUNE 2025
$169,900
372.6 miles away - KEWANEE, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: ROWMAX CHOPPING STALK ROLL, LESS TEMPORARY PROTECTION, 9 PIN CONTROLLER, StalkMaster: No, Standard Warranty thru: 6/2/2026
$169,900
372.6 miles away - KEWANEE, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: ROWMAX CHOPPING STALK ROLL, STALK DEFLECTOR READY, 60/70/S600/S700/S7 SERIS, StalkMaster: No, Standard Warranty thru: 6/2/2026
$169,900
380.1 miles away - FREEPORT, IL
Number of Rows: 12
Header Row Spacing: 30
2025 John Deere CF12 Corn Head – 30" rows, Non-StalkMaster, RowMax chopping stalk rolls, active end fenders, full-row stalk deflectors, 9-pin controller, compatible with 60/70/S600/S700/S7 series combines.
$169,900
380.1 miles away - FREEPORT, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: LESS TEMPORARY PROTECTION, StalkMaster: No
$165,830
328.1 miles away - ROANOKE, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING ROLLS, AVAILABLE JULY 2025
$165,830
387.1 miles away - GENESEO, IL
Number of Rows: 12
Header Row Spacing: 30
30" SPACING, NON-STALKMASTER, STALK DEFLECTORS ON ALL ROWS, ACTIVE END FENDERS, ROWMAX CHOPPING KNIFE ROLLS, AVAILABLE JULY 2025
$160,160
307.5 miles away - LEXINGTON, IL
Number of Rows: 16
Header Row Spacing: 30
STALKMASTER, 30" SPACING, X SERIES CARRIER, ACTIVE ENS FENDERS, OPPOSED KNIFE ROLLS, STALK DEFLECTORS
$159,900
365.9 miles away - BRIMFIELD, IL
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: ACTIVE END FENDERS, ROWMAX CHOPPING STALK ROLL, STALK DEFLECTOR ON ALL ROWS, StalkMaster: No
$159,900
655.8 miles away - PITTSBURG, KS
Platform Size: 50 Feet
Platform Kind: Draper
2025 JOHN DEERE HD50F, CAM REEL, X SERIES CARRIER, COARSE TOOTH KNIFE, GAUGE WHEELS, SHORT DIVIDERS, CENTER CROP FLOW DIVIDER, AVAILABLE JANUARY 2026
$159,900
655.8 miles away - PITTSBURG, KS
Platform Size: 50 Feet
Platform Kind: Draper
2025 JOHN DEERE HD50F, CAM REEL, X SERIES CARRIER, COARSE TOOTH KNIFE, GAUGE WHEELS, SHORT DIVIDERS, CENTER CROP FLOW DIVIDER, AVAILABLE JANUARY 2026
$159,380
645.5 miles away - ATCHISON, KS
Number of Rows: 12
Header Row Spacing: 30
Number of Rows: 12, Header Row Spacing: 30, New: Used, Other: INTERMESHING KNF STALK ROW, StalkMaster: No
$158,240
645.5 miles away - ATCHISON, KS
Number of Rows: 16
Header Row Spacing: 30
2022 JOHN DEERE C16F, 30" folding corn head, x series combine adapter setup, intermeshing knife stalk rolls. AVAILABLE FEBRUARY 2025
$156,470
655.8 miles away - PITTSBURG, KS
Number of Rows: 16
Header Row Spacing: 30
2021 JOHN DEERE C16F, 30" folding corn head, x series combine adapter setup, rowmax chopping stalk rolls, stalk deflectors on all rows, AT rowsense sensors
$155,590
616.2 miles away - ADRIAN, MO
Platform Size: 50 Feet
Platform Kind: Flex/Draper
Platform Size: 50 Feet, Platform Kind: Flex/Draper, New: Used, Other Options: Flip Over Reel, Standard Warranty thru: 6/1/2025
of 231
.
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.