$135,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 2904
Transmission: IVT
Horse Power: 145
Drive Type: 4WD
Hours: 2904, Transmission: IVT, Horse Power: 145, Drive Type: 4WD, New: Used, Horsepowerpto (hp): 111, Loader: Yes, Rear Tire Type: Singles, Wheel Type: Tires
$91,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 4403
Transmission: CVT
Horse Power: 167
Drive Type: 4WD
Hours: 4403, Transmission: CVT, Horse Power: 167, Drive Type: 4WD, New: Used, Front Suspension: No, Front Tire Type: Singles, haspto: Yes, Horsepowerpto (hp): 135, Loader: Yes, Rear Tire Type: Singles
$71,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 359
BARELY USED E50 MINI EXCAVATOR ONLY USED ON DEMO 359 HOURS ENCLOSED ROPS QUICK ATTACH HYDRAULIC THUMB FINANCING OPTIONS AVAILABLE!
$69,500
1504.9 miles away - NORTH LOGAN, UT
Hours: 239
Used 2023 Bobcat T76 Skid steer tracked in good condition 239 hours Quick attach Two-speed Financing options available!
$69,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 450
Transmission: Power Shuttle
Horse Power: 74
Drive Type: MFWD
Hours: 450, Transmission: Power Shuttle, Horse Power: 74, Drive Type: MFWD, New: Used, Backhoe: No, Loader: Yes
$59,500
1504.9 miles away - NORTH LOGAN, UT
Hours: 57
STANDARD FLOW 57 HOURS 78" BUCKET LAP BAR EH CONTROLS COUNTERWEIGHT BLOCK HEATER LCD DISPLAY AIR RIDE SEAT 2 SPEED CAB/AIR/HEAT/ NO RADIO HYD QUICK ATTACH TRACKS FINANCING OPTIONS AVAILABLE!
$50,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 700
Horse Power: 74
Hours: 700, Horse Power: 74, New: Used, Quick Attach: Yes, ROPS Type: Enclosed, Tipload (pounds): 5800
$49,500
1504.9 miles away - NORTH LOGAN, UT
Hours: 1244
Used 2018 New Holland E57C Excavator in good condition 1244 hours 13,892 lbs Operating Weight Auxiliary Hydraulics Quick attach Hydraulic thumb Financing options available!
$45,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 1715
Transmission: Power Shuttle
Horse Power: 71
Drive Type: 4WD
Hours: 1715, Transmission: Power Shuttle, Horse Power: 71, Drive Type: 4WD, New: Used, Operator Station: Cab, Backhoe: No, Horsepowerpto (hp): 64, Loader: Yes
$41,900
1504.9 miles away - NORTH LOGAN, UT
Hours: 149
Transmission: Hydro
Horse Power: 44
Drive Type: MFWD
Hours: 149, Transmission: Hydro, Horse Power: 44, Drive Type: MFWD, New: Used, Backhoe: Yes, Loader: Yes
$31,900
1504.9 miles away - NORTH LOGAN, UT
Hours: 1
Transmission: Hydro
Horse Power: 35
Drive Type: MFWD
Hours: 1, Transmission: Hydro, Horse Power: 35, Drive Type: MFWD, New: New, Operator Station: Cab, Backhoe: No, Horsepowerpto (hp): 30, Loader: Yes, midmountmower: No
$28,500
1504.9 miles away - NORTH LOGAN, UT
Hours: 15
Transmission: Hydro
Horse Power: 34.9
Drive Type: MFWD
Hours: 15, Transmission: Hydro, Horse Power: 34.9, Drive Type: MFWD, New: Used, Operator Station: Cab, Backhoe: No, Loader: Yes, midmountmower: No
$25,115
1504.9 miles away - NORTH LOGAN, UT
Hours: 1
Transmission: Hydro
Horse Power: 24.5
Drive Type: MFWD
Hours: 1, Transmission: Hydro, Horse Power: 24.5, Drive Type: MFWD, New: New, Backhoe: No, Loader: Yes, midmountmower: No
$22,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 263
Used 2021 Bomag BMP 8500 Trench Roller in good condition 263 hours Financing options available!
$19,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 4
Transmission: Hydro
Horse Power: 23
Drive Type: MFWD
Hours: 4, Transmission: Hydro, Horse Power: 23, Drive Type: MFWD, New: Used, Operator Station: No Cab, Backhoe: No, Loader: Yes, midmountmower: No
$15,000
1504.9 miles away - NORTH LOGAN, UT
Hours: 4841
Transmission: Synchro
Horse Power: 122
Drive Type: MFWD
Hours: 4841, Transmission: Synchro, Horse Power: 122, Drive Type: MFWD, New: Used, Operator Station: Cab, Loader: No, Rear Tire Type: Singles
$14,700
1504.9 miles away - NORTH LOGAN, UT
Axle: Tandem, Composition: Steel, Floor Type: Wood Floor, Grossvehicleweight (pounds): 23900, Length (feet): 26, New: New, Type of Neck: Gooseneck, Width (inches): 8.6
$13,200
1504.9 miles away - NORTH LOGAN, UT
New 2025 Walton TSX208-22B Trailer 22ft long 7 ft wide GVWR: 18,000 lbs Tandem axle Financing options available!
$11,400
1504.9 miles away - NORTH LOGAN, UT
Axle: Tandem, Composition: Steel, Floor Type: Steel, Grossvehicleweight (pounds): 15500, Length (feet): 14, New: New, Type of Neck: Fixed
$10,500
1504.9 miles away - NORTH LOGAN, UT
Hours: 4362
Transmission: Gear Drive
Horse Power: 68
Drive Type: 2WD
Hours: 4362, Transmission: Gear Drive, Horse Power: 68, Drive Type: 2WD, New: Used, Operator Station: Cab, Backhoe: No, Loader: No
$9,800
1504.9 miles away - NORTH LOGAN, UT
Axle: Tandem, Composition: Steel, Floor Type: Wood Floor, Grossvehicleweight (pounds): 15500, Length (feet): 20, New: Used, Width (feet): 7
$9,600
1504.9 miles away - NORTH LOGAN, UT
TONGUE/FRAME, 6" X 8.5 LB I-BEAM AXLE, 2 - 6K DROP 2 ELECTRIC BRAKES BATTERY - GROUP 27 FENDER, 14 GA TEARDROP, DIAMOND PLATE, WELD-ON FRAME SIZE, L10X60 GATE, 3-WAY DUMP GATE (STANDARD) JACK, 7K DROP LEG JACK LIGHTS, ALL LED PAINT, METALLIC GRAY RAMPS, 60" REAR SLIDE-IN (2" SQUARE TUBE) SIDES, 18" TALL, 12GA INTEGRAL W/ FLOOR SPARE, ST235/80R16 RADIAL 6 HOLE BLACK SPAREMOUNT - PASSENGER (CURB) SIDE STABILIZER JACK, DROP-LEG (PAIR) STORAGE, STEEL HYDRAULIC PUMP BOX SUSPENSION, 5-LEAF SLIPPER SPRINGS TARP, 18' HEAVY DUTY, BLACK MESH (INSTALLED) TARP, 18' HEAVY DUTY, BLACK MESH (INSTALLED) THREE STAGE TELESCOPIC CYLINDER THREE STAGE TELESCOPIC CYLINDER TIE DOWN, STANDARD 1/2" D-RINGS (4 TOTAL) TIRES, ST235/80R16 RADIAL 6 HOLE BLACK
$9,000
1504.9 miles away - NORTH LOGAN, UT
Vector Pro comes with the RTK accuracy unlocked on it. In really good condition.
$8,400
1504.9 miles away - NORTH LOGAN, UT
$6,600
1504.9 miles away - NORTH LOGAN, UT
$6,500
1504.9 miles away - NORTH LOGAN, UT
Axle: Tandem, Composition: Steel, Floor Type: Wood Floor, Grossvehicleweight (pounds): 20000, Length (feet): 24, New: Used
$5,700
1504.9 miles away - NORTH LOGAN, UT
$5,500
1504.9 miles away - NORTH LOGAN, UT
NITROGEN BREAKER W/NAIL POINT
$5,500
1504.9 miles away - NORTH LOGAN, UT
$5,250
1504.9 miles away - NORTH LOGAN, UT
❄️ 2023 Bobcat MI86 Snow Blade Specifications Model: MI86 Width: 86 inches Height: 28.5 inches Length: 35.6 inches Operating Weight: 809 lbs Cutting Edge (Steel): 0.5" x 6" Cylinder Bore: 3.5 inches Cylinder Rod: 1.2 inches Cylinder Stroke: 9.6 inches Working Width (Fully Angled): 75 inches Cylinders: 1 Trip Springs: 4 Degree of Angle (Right or Left): 30° Optional Rubber Cutting Edge: 1" x 6" ✅ Key Features Hydraulic Angle Adjustment: Allows for easy moldboard angle adjustments up to 30° right or left using fingertip controls. Trip Moldboard: Reduces potential impact damage from obstructions, enhancing durability. High-Carbon Steel Cutting Edge: Standard for long-lasting performance. Adjustable Depth Shoes: Ensure consistent blade depth for optimal snow removal. Quick Attach System: Compatible with Bobcat's Bob-Tach™ mounting system for easy attachment changes. Compatible Equipment The MI86 Snow Blade is compatible with various Bobcat equipment, including: Skid-Steer Loaders Compact Track Loaders Utility Work Machines Compact Tractors Toolcat Utility Work Machines
of 2
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.