$141,060
569.3 miles away - AMES, IA
2023 Manitou TJ 65+ - 65' Boom Lift 72'2" Working Height, 54'4" Max Outreach, 899 lb. Platform Capacity Optimize your "height" handling work with our Manitou telescopic mobile elevating work platforms! The TJ 65+ telescopic boom is designed to accommodate three operators, providing a platform capacity up to 400 kg. Along with this extra capacity, this model is also built with all the necessary features to facilitate your operations in high areas with difficult access: continuous 360 rotation, 3 driving modes (2/4 wheel or crab), durable chassis built for all-terrain, perforated platform floor, and transmission bridges. Take advantage of the exceptional performance of our MEWP line-up to improve your productivity and security of your crew on the jobsite. Features: Lockable fuel cap. 230V Predisposition. 4 simultaneous movements. 4 wheel steer with crab mode. Audible alarm and illuminated indicator lamp (leveling, overload, lowering) . Backup electrical pump. Continuous turret rotation. Differential locking on rear axle. Drive enable. Electronic platform compensation. Emergency stop button in platform and on frame. Engine on swivel chair. Front axle with limited slip. Fuel gauge with low level indicator. Integrated diagnostic assistance. Lights. Management via engine speed bearing. Oscillating front axle. Protective cover for control panel. Remote control for transport.
$101,195
569.3 miles away - AMES, IA
RENTAL ONLY 2022 Genie® S-45XC 45' Boom Lift Only available to rent. Able to perform a wider range of heavier lift tasks on construction and industrial jobsites with Genie® S®-40 XC™ and S-45 XC telescopic booms — offering a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted and up to three people on board. These models are also available with a fixed, four-point track system that allows contractors to work any time of the year. Features may include: 660-lb (300 kg)/1,000-lb (454 kg) dual platform capacity Load sense technology for accurate load weighing and zero-load field calibration Automatic envelope control enables boom to retract when it reaches its operating envelope Chassis tilt sensor technology maximizes operators’ ability to access hard-to-reach work areas Robust jib is capable of easily handling increased maximum capacity CAN-bus control system with onboard diagnostics maximizes serviceability Design focus on user interface and simplicity makes this machine easy-to-use Can be equipped with the new Genie Lift Power™ generator system Commonality in design and parts with other Genie booms
$98,995
569.3 miles away - AMES, IA
Hours: 55
Horse Power: 111
Hours: 55, Horse Power: 111, Fuel Type: Diesel, A/C: Yes, Basegroundclearance (inches): 12.5, Breakoutforce (pounds): 8210, camera: Yes, Capacity (pounds): 2975, Cruisespeed (miles/hour): 5, Cruisespeed2 (miles/hour): 7.3, engineblockheater: Yes, Fuelcapacity (gallons): 31.6, Groundpressure (pound/square inch): 4.68, New: Used, Operatingweight (pounds): 12590, Quick Attach: Yes, ROPS Type: Enclosed, Standardhydrflow (gallon/minute): 23.2, telematics: Yes, Tipload (pounds): 8629, Tracksize (inches): 17.7, Turbo: Yes
$98,995
569.3 miles away - AMES, IA
2024 Vermeer VX50 Vacuum Excavator Trailer 500 Gallon Spoil Tank | 1,025 CFM Vacuum | 4" Hose | 3,000 PSI Pump The 2024 Vermeer VX50 is a third-generation vacuum excavator designed for serious productivity. Ideal for potholing and drill fluid management, it delivers powerful performance with a 49-hp Tier 4 Final Kubota diesel engine and 1,025 CFM blower. Built for durability and efficiency, it features a 500-gallon spoil tank and user-focused enhancements for faster, cleaner operation. Key Features: - In-tank Washdown: High-pressure water spray cleans the interior while dumping, reducing cleanup time and clearing tough debris. - Three-Stage Cyclonic Filtration: Helps prolong blower life with a tuned vortex system for both wet and dry vacuuming. - Cam-Over Rear Door: Creates a 360° positive seal with no in-tank moving parts for easier, external maintenance. - Remote Drains: Centrally located for operator convenience during servicing. - Auto-Belt Tensioners: Maintain optimal belt tension automatically, extending service life. - No Hassle Hose: Side-mounted hose hanger allows quick transport between jobsites without disconnecting. Boost jobsite efficiency with the 2024 VX50. Contact Star Equipment today to learn more!
$96,995
569.3 miles away - AMES, IA
Hours: 320
2023 Manitou MT 733 Telehandler - 7,275 lb. Capacity, 22' 8" Reach 7,275 lb. Capacity | 22' 8" Lift Height | 74 hp Diesel | 12'10" Outreach This Manitou MT 733 telehandler is equipped with the following: Fully Enclosed Cab with Heat and A/C JSM® Joystick Controls Hand Throttle Hydraulic Attachment Locking Quick Attach. Working Lights Mounted on the Boom. Backup Alarm. Battery Disconnect. Fenders. 4 Speed Power Shuttle Transmission. Hydraulic Steering with Three Steering Modes - 2 Wheel Steer / 4 Wheel Steer / Crab Steer. Cyclonic Pre-Cleaner. Telematics. The Manitou MT 733 Easy telehandler is specially designed for the construction sector. Its low fuel consumption and affordable price are greatly appreciated by buyers and professionals wishing to invest in large quantities. Easy to use and maintain, it provides a maximum lift height of 22' 8" and lift capacity up to 7,275 lbs. Its compact frame and ease of operation are made possible due to its three steering modes combined with 4-wheel drive, the JSM joystick control and a mechanical gearbox, mean you can handle all sorts of situations with any type of ground conditions. Affordable, powerful and robust, this handler will quickly become a valued partner for all of your work sites.
$89,995
569.3 miles away - AMES, IA
2023 Manitou ATJ 46+ - 46' Boom Lift Enjoy the handling performance of the ATJ 46+ high capacity aerial work platform. Thanks to its compact structure, all-terrain design and high ground clearance, this MEWP has excellent performance on uneven surfaces with the ability to work in cramped, difficult to access areas. The extra capacity in the work platform of the ATJ 46+ is designed to fit 3 operators. Increased operator comfort is provided by the large spacious work platform, ergonomic driving position and excellent visibility of the loads and the jobsite environment. Make smoother movements and increase productivity with the ATJ 46+ articulated aerial work platform!
$86,995
569.3 miles away - AMES, IA
Hours: 80
Hours: 80, A/C: No, Articulating: No, Basedrivespeed (miles/hour): 14.9, Basegroundclearance (inches): 10, Capacity (pounds): 5500, Front Fenders: Yes, Horse Power: 69, Maxforwardreach (feet): 11, Maxliftheight (feet): 19.0833333333333, New: Used, Operatingweight (pounds): 9759, ROPS Type: Enclosed, telematics: Yes, Transmission: Hydrostatic, Wheelbase (feet): 7.5
$85,986
569.3 miles away - AMES, IA
Hours: 110
Hours: 110, A/C: Yes, Capacity (pounds): 4400, Drive Type: 4WD, Fuelcapacity (gallons): 16, Horse Power: 56.3, Maxforwardreach (feet): 9, Maxliftheight (feet): 14.25, New: Used, Operatingweight (pounds): 9237, ROPS Type: Enclosed, Wheelbase (feet): 7
$76,995
569.3 miles away - AMES, IA
Hours: 115
Horse Power: 74
Hours: 115, Horse Power: 74, Fuel Type: Diesel, A/C: Yes, camera: Yes, Capacity (pounds): 2522, Cruisespeed (miles/hour): 4.8, Cruisespeed2 (miles/hour): 7, engineblockheater: Yes, Groundpressure (pound/square inch): 5.1, New: Used, Operatingweight (pounds): 10270, Quick Attach: Yes, ROPS Type: Enclosed, Standardhydrflow (gallon/minute): 18.8, telematics: Yes, Tipload (pounds): 7205
$66,995
569.3 miles away - AMES, IA
Hours: 1148
2020 Snorkel SR5719 Telehandler - 5,732 lb. Capacity, 19' Reach 5,732 lb capacity, 19' lift height, 10'4" max reach, 70hp Yanmar diesel. This compact telehandler is equipped with cab, heat, a/c, auxiliary hydraulics (18.5 gpm), 4 wheel drive, block heater, LED lights, constant flow proportional joystick, and 48" nonrotating carriage w/ 48" tines. Sold as-is. Two pin adapters available at an additional cost. The Snorkel SR5719 compact rough terrain telehandler delivers top performance in a compact design. Featuring full-time 4-wheel drive, power assisted steering and proportional joystick, the telehandler is packed with power and precision to lift materials in any application. Features may include: Easy access to components for servicing Full time 4 wheel drive 4 wheel steer Selectable front, crab & coordinated steering modes Auxiliary hydraulic circuit on the boom Variable speed hydrostatic drive Fully enclosed cab with air conditioning Proportional joystick Illuminated gauge and switch panels Color LCD display with machine & engine diagnostics Adjustable suspension seat LED Road lights (4) Block heater LED work lights on boom (2) Constant flow Snorkel SR5719 Spec Sheet
$60,995
569.3 miles away - AMES, IA
Articulating: Yes, Basedrivespeed (miles/hour): 15.5, camera: No, Capacity (pounds): 6614, Drive Type: Wheel, dumperconfiguration: Front Skip, Fuelcapacity (gallons): 11.9, Horse Power: 45.3, Hours: 261, New: Used, Operatingweight (pounds): 5675, reversibleoperatorstation: No, ROPS Type: Open, tippingtype: Swivel, Watercapacity (gallons): 317
$52,995
569.3 miles away - AMES, IA
Hours: 139
Horse Power: 24.4
2023 Takeuchi TB335R Compact Excavator - 8,310 lbs. 8,310 lbs. | 10'6.2" Dig Depth | 17'9.7" Reach | 24.4hp This unit is equipped with cab, heat, a/c, defrost, windshield wiper & washer, skylight w/ sunshade, radio, quick coupler, auxiliary hydraulics, TFM telematics, 24.4hp diesel, 10' 6.2" dig depth, and weighs 7,970 lbs. Pricing does not include a bucket or hydraulic thumb. Pictures may not be representative of the unit's attachment and/or thumb configuration. Loaded with state-of-the-art technology and a fresh well-appointed cabin with intuitive functions, the TB335R represents the first short tail swing compact excavator offering in the 3.5t class for Takeuchi. Features include updated high-definition monitors with greater functionality, jog dial controls, wraparound counterweight, dedicated coupler circuit on cab models, and excellent service access for easy maintenance. The TB335R delivers a superior working range and excellent power that ensures all-day productivity and performance. Features may include: Short Tail Swing, Compact Design Provides a stable operating platform, enables you to work in more confined areas, and focus on your job worrying less about rear swing impacts. Ease of Maintenance Swing out rear door and right side cover that opens high overhead provide exceptional access to inspection and maintenance points Function and Efficiency The lower horsepower rating of the TB335R does not require the use of a DOC/DPF exhaust aftertreatment system. Increased Protection All steel construction ensures body integrity through greater strength and rigidity and protects key components from damage.
$50,995
569.3 miles away - AMES, IA
2022 KATO-CES 17VXB Battery-Powered Compact Excavator (4,200 lbs.) Operate The 17VXB offers a comfortable operator space with easy to see instruments, and ergonomic, responsive, controls. All of this is protected below a ROPS/TOPS certified open canopy. Emissions The 17VXB’s zero-emission operation increases efficiency and ROI on jobsites in sterile environments or with regulatory emission caps, reducing your crew’s prep and clean up time. Usability The 17VXB’s breakout force and dual auxiliary hydraulics offer superior functionality for many jobsite functions. Additionally, the battery-powered system offers superior responsiveness. Expand Hydraulic-expandable tracks and folding push blade have an overall width between 39” - 51”, offering the best of accessibility and operating stability. Specifications Performance Bucket Capacity - 1.6 ft3 Bucket Width - 12” Operating Weight - 4,200 lbs. Swing Speed - 8.5 rpm Travel Speed (Low/ High) - 1.3 mph / 2.5 mph Gradeability - 30° Ground Pressure - 4.4 psi Bucket Digging Force - 3,687 lbs. Powertrain Type - Electric Motor & Li-Ion Battery Run Time - 8 Hours Recharge Time (25% Recharge) - 8 Hours (1 Hour) Boom Swing System Type - Offset Boom w/ Hydraulic Cyl. Swing Angle (L / R) - 55° / 70° Hydraulic System Total Hydraulic System Flow - 12 gpm Max Auxiliary Hydraulic Flow - 7 gpm Dozer Blade Size - 3’ 3” x 9.25” Lift Above / Drop Below Ground - 11.8” / 9”
$49,995
569.3 miles away - AMES, IA
2017 JLG® 330LRT Rough Terrain Scissor Lift - 33' Lift Height 32.8' Lift Height | 39.4' Working Height | 2,250 lb. Capacity | 7.7' Width With JLG® RT Series scissor lifts, you have the power you need to handle uneven surfaces and congestion on jobsites. Set up is quick and efficient with the optional one-touch leveling jacks. And the exclusive MegaDeck® platform gets more people and materials up to your work area for optimum productivity. Key Features: Enhanced Stability on Uneven Surfaces - Standard oscillation gives you better traction and grade climbing ability Smoother Extension Deployment - New platform is designed to shed debris and allows for smoother extension deployment Better Serviceability - Fully accessible hydraulic and engine compartments are easier to service Standard Features 4-Wheel Drive. Automatic Transmission. Three-speed Drive Select. Proportional Drive/Lift Up/Lift Down. Oscillating Axle. 76 x 154 in. Platform. 4 ft Manual Deck Extension. 110V-AC Receptacle in Platform. Adjustable, Removable Platform. Control Station. Fold-Down Handrails. Horn. Tilt Light and Alarm. All Motion Alarm. Unit not available for sale outside the state of Iowa. Subject to availability for sale.
$46,995
569.3 miles away - AMES, IA
Hours: 225
2022 KATO-CES 9VXB Batter-Powered Compact Excavator (2,060 lbs.) This ultra-mini zero tail swing excavator is much faster and easier alternative to any shovel or wheelbarrow for working in tight spaces. The 9VXB is a small mini excavator with large potential. Tracks retract to 27.5” to allow passage through a standard yard gate, doorways or other narrow spaces. Size and power are ideal for residential or indoor work. Features Lithium Ion Battery Pack. 8 hour run time on full charge. No battery memory – can be charged at anytime. Throttle control for easy operation. Backfill blade with retractable blade extensions Charger comes standard. Fast 3 hour charging system available.
$44,995
569.3 miles away - AMES, IA
Hours: 601
Horse Power: 68
Hours: 601, Horse Power: 68, A/C: Yes, Bucket: No, camera: Yes, Capacity (pounds): 2110, frontelectric: Yes, Fuelcapacity (gallons): 16.5, New: Used, Operator Controls: Hand, Quick Attach: Yes, ROPS Type: Enclosed, seattype: Air Ride, selflevelingloader: Yes, telematics: Yes, Tipload (pounds): 3800
$44,995
569.3 miles away - AMES, IA
Hours: 754
Horse Power: 70.7
Hours: 754, Horse Power: 70.7, A/C: Yes, camera: Yes, Capacity (pounds): 2307, engineblockheater: Yes, frontelectric: Yes, New: Used, Operatingweight (pounds): 9901, Operator Controls: Hand, Quick Attach: Yes, ROPS Type: Enclosed, seattype: Air Ride, selflevelingloader: Yes, Standardhydrflow (gallon/minute): 21.8, telematics: Yes, Tipload (pounds): 6144
$44,995
569.3 miles away - AMES, IA
Hours: 390
Horse Power: 24.4
2023 Takeuchi TB235-2 Compact Excavator - 7,639 lbs. 7,639 lbs. | 10'7.8" Dig Depth | 17'2.9" Reach | 24.4hp This unit is equipped with cab, heat, a/c, defrost, wiper & washer, skylight w/ sunshade, radio, quick coupler, auxiliary hydraulics, TFM telematics, 24.4hp diesel, 10' 7.8" dig depth, and weighs 7,639 lbs. Pricing does not include a bucket or hydraulic thumb. Pictures may not be representative of the unit's attachment and/or thumb configuration. Compact Excavator Ease of transport and an excellent working range make the TB235-2 a great choice for utility work, landscaping and construction. The TB235-2 has all steel construction to ensure long-term durability, a multi-information display that provides the operator with outstanding functionality, and large access panels for easy routing maintenance and inspection. The TB235-2 is a well-appointed excavator that delivers the power and performance you expect from Takeuchi. Features may include: ENGINE EPA Final Tier 4 Automatic Fuel Bleed System Dual Element Air Filter Automatic Idle ELECTRICAL LCD Multi-Informational Display (Canopy) 5.7" Multi-Informational Display (Cab) Sealed Rocker Switches 12 volt System with 55 amp Alternator Halogen Work Lights: Two Forward Facing
$43,995
569.3 miles away - AMES, IA
2024 National Flooring Equipment 5700DL Ride-On Floor Stripper This ride-on floor scraper is equipped with Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated. SAFETY Automatic kill switch is triggered when the operator seat is vacant. Larger/deepened forklift pockets. E-stop knob for safety. Debris deflector protects machine from loose material. COMFORT Ergonomic design includes movable foot pegs, taller handles, and an adjustable seat. Hinged hood system for easy-access maintenance. PERFORMANCE Precise hydraulic steering for maneuvering in tight spaces. Zero turn radius. Quick-change swivel head blade holder. Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor. Nonmarking tires. Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle. Compact design fits through standard door frames and elevators doors. Front caster wheels allow increased maneuverability in tight spaces. 12-volt LED light for increased visibility.
$42,995
569.3 miles away - AMES, IA
2022 Husqvarna® Construction FS 7000D 74hp Diesel, 26” Blade Guard, E-Tracking, Single Speed, Self-propelled. The modern FS 7000 D is our most powerful diesel walk-behind flat saw with low emissions, developed to be compliant with Tier 4 regulations. Ideal for concrete and asphalt cutting up to 17 1/4" deep. Suitable for mid-sized road work, service work and smaller jobs that require high production rates. It is highly versatile thanks to its high output, compact size and good maneuverability. It is equipped with an intuitive and ergonomic digital control panel with all important functions, and is easy to monitor. Features may include: Powerful and fuel-efficient - Common-rail diesel engine with low emissions. Low emissions - Equipped with diesel particle filter (DPF). Complies with Stage IIIB / Tier 4 regulations. Intuitive and ergonomic control panel - All important functions are easy to reach and monitor, such as blade rpm, forward speed, electronic tracking, depth gauge, belt and pulley ratios, runtime and service minder. Easy adjustment of tracking for straight cuts - Electric tracking system includes position indicator on the display, it can automatically return to neutral position and has the ability to memorize last used setting. Powerful and productive - The power transmission system with right-angle gearbox transmits high power to the blade shaft with optimum torque and minimized vibrations. Adjustable handles - Provides a closer and more comfortable position to the cutting side for easier alignment and straighter cuts. Handle can also be folded for transport. Easy to operate - Well-balanced design with a low profile gives you high visibility and makes it easy to handle and transport. Low maintenance - The IntelliSeal blade shaft system allows for a minimum of 250 maintenance-free hours without daily greasing of bearings. Optimized weight distribution - Helps maintain traction and gives comfortable operation. Ergonomic - Adjustable handlebars, intuitive control layout, easy maneuverability and low vibrations facilitate operation and reduce user-fatigue Convenient transport between truck and work site - The blade clutch makes it possible to stop the blade when the engine is still running, for safe transportation. Optimized display visibility - Automatic adjustment of the display back light makes the display readable in all light conditions. Adjustable and telescopic pointer - Provides good visibility when cutting and can be folded for transport. Quick dis-engagement at blade slam - When thermal expansion of the concrete causes the blade to pinch in the kerf of the cut you can dis-engage the blade with the blade clutch. Easy assembly of blade guard - Blade guard with lockable hinge. Easy to assemble and dis-assemble using your blade wrench. Automatic depth stop - The depth indicator's stop function stops the saw at your desired cutting depth. Adjustable for all blade diameters.
$41,590
569.3 miles away - AMES, IA
Hours: 10
Hours: 10, compactortype: Trench Roller, Fuelcapacity (gallons): 63, Horse Power: 17.2, New: Used, Operatingweight (pounds): 3516, Power Type: Diesel
$39,995
569.3 miles away - AMES, IA
Capacity (cubic foot/minute): 440, Fuel Type: Diesel, Horse Power: 148, Hours: 2993, New: Used, Power Type: Engine Powered, Pressure (pound/square inch): 150
$39,995
569.3 miles away - AMES, IA
New: Used, Capacity (pounds): 925, Drive Type: Track, Fuelcapacity (gallons): 13, Horse Power: 24.5, Hours: 390, Operatingweight (pounds): 3595, Tracksize (inches): 9
$38,995
569.3 miles away - AMES, IA
2019 Sullivan-Palatek, Inc. D375PHJD4 Portable Air Compressor (375 CFM) The D375PHJD4 portable compressor is a versatile dual pressure unit, delivering 375 cfm at 100 psi or 150 psi. At its core, the new model features a 140 hp John Deere Tier 4 final engine and a large 127 mm twin screw air end engineered and manufactured by Sullivan-Palatek. Other features include a full containment frame, remote drains, lockout aftercooler capability, large 80-gallon fuel tank, exterior lit fuel fill, fuel saving, and noise-reducing clutch fan, and an exterior that boasts a durable galvanneal enclosure with a powder coated finish for rust and corrosion resistance. The compressor is equipped with the SPEC full-service electronic controller, with digital readouts for everything from compressor temperature to aftercooler filter warnings. The controller also features the model’s complete parts and service list for ease of maintenance. Features & Benefits Large, 127mm Diameter Twin Screw Air End Exclusive Three Year Warranty on Air End, Unlimited Hours Lunette Eye Type Hitch Automatic 0 to 100% Capacity Control Two Stage Dry Type Air Filter with Indicators Oil Level Sight Gauge Stacked Coolers for Compressor and Engine Cooler Access Doors for Cleaning Tires: ST 225/75 R 15 Radial W 6 Lug Wheel Galvanneal Enclosure-Rust & Corrosion Resistant Automatic Safety Shutdown High Compressor Discharge Temperature High Engine Temperature Low Engine Oil Pressure Full Containment Frame Remote Drains Automatic Blowdown Valve LED Stop, Turn, Tail Lights Unloaded Starting Battery: 2 each at 1000 CCA E-Stop Fuel Saving and Noise Reducing Fan Clutch SPEC Controller
$37,995
569.3 miles away - AMES, IA
Axle: Tandem, Capacity (kilowatts): 22, Fuel Type: Diesel, Fuelcapacity (gallons): 141, Horse Power: 40, Hours: 260, Kwprimerating (kilowatts): 25, New: Used
$36,995
569.3 miles away - AMES, IA
Basedrivespeed (miles/hour): 3.23, Basegroundclearance (inches): 13, Capacity (pounds): 500, coldweatherpackage: No, Drive Type: 4WD, gradeability: 40, hasjib: Yes, Horse Power: 24.1, Hours: 1202, Maxliftheight (feet): 32, Maxreach (feet): 21, New: Used, Platformlength (feet): 4, Platformrotation (degree): 70, Platformwidth (feet): 3, Power Type: Engine Powered, powertoplatform: Yes, telematics: No, Turntablerotation (degree): 350, turntablerotationtype: Non-continuous, Workingheight (feet): 39
$36,611
569.3 miles away - AMES, IA
Hours: 70
Hours: 70, compactortype: Trench Roller, Fuelcapacity (gallons): 63, Horse Power: 17.2, New: Used, Operatingweight (pounds): 3516, Power Type: Diesel
$35,187
569.3 miles away - AMES, IA
2022 Fecon® BK7618 76" Forestry Mulcher The BLACKHAWK is the mulcher for tackling vegetation management and land clearing needs in stringy, fibrous, dense, and fast-growing materials typically found in regions with higher temperatures and longer growing cycles. It is designed to quickly process stubborn standing vegetation and will pick up and feed felled material to ensure no unprocessed matter is left behind. Features: The Blackhawk's rotor is designed with: Optimal sizing for quick spool up and immediate recovery. Reversible tools to maximize tool life and value. A lacing pattern to process material efficiently optimizing production and tool life. The Blackhawk's cutting chamber is manufactured with: High Strength steel body construction to withstand the rigors of everyday use. Replaceable bolt-on shear bar and wear liner. Adjustable pin-on push bar to guide cut material. Other design features include: Bolt-on universal SSL/CTL quick attach. Carrier specific hydraulic hoses and couplers. Variable displacement 107cc hydraulic motor.
$34,995
569.3 miles away - AMES, IA
2022 Wacker Neuson G50 Generator 50KVA Only available to rent. Durable mobile generator offers reliable power The G50 mobile generator is powered by a Kohler turbo-charged engine with DOC only provides a DPF and regeneration-free experience. The G50 offers the perfect power solution where single and three phase power are needed for construction commercial, industrial and special event applications. The sound-attenuated generator provides quiet operation and large fuel tank offers long run times, making it a flexible and reliable choice. Low cost of ownership and longer uptime due to service efficiency, better fuel economy and longer service intervals. Ideally suited for construction sites where durability, reliability and flexibility are required to supply continuous power for applications such as lighting, cranes, concrete mixers and conveyor belts. Brushless, oversized alternators with separate excitation winding and AVR (Automatic Voltage Regulation) provide superior motor starting and enhanced ability to run non-linear loads. Single switch start and simple, uncluttered control panel provide unmatched ease of use. Automatic remote start capability standard which is ideal for temporary standby applications. Fluid containment system, standard. Factory-installed customized options are available. These include, but are not limited to, cold weather options, fully equipped highway-ready trailers, and a camlock panel.
$34,995
569.3 miles away - AMES, IA
2022 Wacker Neuson G50 Generator 50KVA Wacker G50 mobile generator with 50KVA, fuel cell, heavy duty battery with charger, disconnect, block heater, and 2" ball hitch. Durable mobile generator offers reliable power The G50 mobile generator is powered by a Kohler turbo-charged engine with DOC only provides a DPF and regeneration-free experience. The G50 offers the perfect power solution where single and three phase power are needed for construction commercial, industrial and special event applications. The sound-attenuated generator provides quiet operation and large fuel tank offers long run times, making it a flexible and reliable choice. Low cost of ownership and longer uptime due to service efficiency, better fuel economy and longer service intervals. Ideally suited for construction sites where durability, reliability and flexibility are required to supply continuous power for applications such as lighting, cranes, concrete mixers and conveyor belts. Brushless, oversized alternators with separate excitation winding and AVR (Automatic Voltage Regulation) provide superior motor starting and enhanced ability to run non-linear loads. Single switch start and simple, uncluttered control panel provide unmatched ease of use. Automatic remote start capability standard which is ideal for temporary standby applications. Fluid containment system, standard. Factory-installed customized options are available. These include, but are not limited to, cold weather options, fully equipped highway-ready trailers, and a camlock panel.
of 10
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.