2022 Hyundai HX140AL
$199,000
636.5 miles away - CONCORD, NH
Hours: 550
2022 HYUNDAI HX140ALD EXCAVATOR WITH ENGCON TILT ROTATOR, INCLUDES DIGGING, TRENCHING, AND CLEAN UP BUCKET. 550 HOURS $199,000
Dealer Info
CONCORD, NH
636.5 miles away
2018 SCREENPOD TS620
$179,000
636.5 miles away - CONCORD, NH
2018 Screenpod TS620 trommell screener with pre-emissions CAT diesel which includes 1/2" drum & 3/4" punch plate drum, 670 hours
Dealer Info
CONCORD, NH
636.5 miles away
2016 Link-Belt 470 X3
$175,000
636.5 miles away - CONCORD, NH
Hours: 5085
2016 LINK-BELT 470X3, ONE OWNER, 5085 HOURS, EXCELLENT CONDITION, SEVERE SERVICE BUCKET, AUX HYDRAULICS, READY FOR THE JOB SITE
Dealer Info
CONCORD, NH
636.5 miles away
2018 Hyundai HX235-LCR
$160,000
636.5 miles away - CONCORD, NH
Hours: 1234
2018 HYUNDAI HX235LCRD WITH 1234 HOURS. EQUIPPED WITH CRAIG HYDRAULIC WEDGELOCK COUPLER, THUMB, AND DIGGING BUCKET/ AUX HYDRAULICS INCLUDES MANUAL DIVERTER VALVES
Dealer Info
CONCORD, NH
636.5 miles away
2012 Caterpillar 336E
$156,000
636.5 miles away - CONCORD, NH
Hours: 7773
2012 CAT 336E hydraulic excavator with 54” digging bucket, CAT coupler and progressive link thumb, new complete undercarriage including, chains, pads, sprockets, upper & lower rollers, idlers, recent complete service including all oils, filters, and DPF filter cleaning, Recently replaced high pressure fuel pump and injectors. Turn key and ready to go! $156,000
Dealer Info
CONCORD, NH
636.5 miles away
2019 Hyundai HL940TM
$148,000
636.5 miles away - CONCORD, NH
Hours: 532
2019 HYUNDAI HL940TM WHEEL LOADER WITH 532 HOURS. PRETTY CLEAN MACHINE WITH HARDLY ANY WEAR ON THE CUTTING EDGE. INCLUDES FACTORY QUICK COUPLER. $148,000
Dealer Info
CONCORD, NH
636.5 miles away
2012 Hyundai ROBEX 380 LC-9
$90,000
636.5 miles away - CONCORD, NH
Hours: 7200
Dealer Info
CONCORD, NH
636.5 miles away
2019 John Deere 75G
$89,000
636.5 miles away - CONCORD, NH
Hours: 1805
2019 JOHN DEERE 75G EXCAVATOR WITH 1805 HOURS. EQUIPPED WITH CRAIG WEDGELOCK COUPLER AND THUMB. MACHINE IS DUAL AUX PLUMBED WITH ROAD LINER TRACKS AND BLADE. VERY CLEAN UNIT.
Dealer Info
CONCORD, NH
636.5 miles away
2020 Case CX80C
$82,500
636.5 miles away - CONCORD, NH
Hours: 1324
2020 CASE CX80C MIDI EXCAVATOR WITH ROADLINERS, ENGCON CONTROLS, ENGCON COUPLER AND NEW 24" DIG BUCKET, LOW 1324 HOURS. READY TO WORK! $89,000.00
Dealer Info
CONCORD, NH
636.5 miles away
2022 John Deere 332G
$79,000
636.5 miles away - CONCORD, NH
Hours: 89
Dealer Info
CONCORD, NH
636.5 miles away
2005 Hyundai ROBEX 210 LC-7
$75,000
636.5 miles away - CONCORD, NH
Hours: 4375
Dealer Info
CONCORD, NH
636.5 miles away
2022 Kubota SVL75-2
$69,900
636.5 miles away - CONCORD, NH
Hours: 67
Dealer Info
CONCORD, NH
636.5 miles away
2018 Takeuchi TB290C
$69,000
636.5 miles away - CONCORD, NH
Hours: 2155
Dealer Info
CONCORD, NH
636.5 miles away
2015 Takeuchi TB290
$68,000
636.5 miles away - CONCORD, NH
Hours: 6337
2015 TAKEUCHI TB290CS EXCAVATOR WITH 6337 HOURS. ENGINE WAS REPLACED AT 4000 HOURS. UNIT IS PLUMBED WITH DUAL AUX. AND IS EQUIPPED WITH A WEDGE STYLE MANUAL COUPLER
Dealer Info
CONCORD, NH
636.5 miles away
2008 Allianz Johnston 4000
$57,500
636.5 miles away - CONCORD, NH
2008 JOHNSTON ALLIANZ 4000, 41,394 MILES, 4376 HOURS, THIS UNIT WAS ALL REFURBISHED, EVERYTHING WORKS, 65MPH SPEED, AUTO BROOMS, THIS SWEEPER IS WORK READY!
Dealer Info
CONCORD, NH
636.5 miles away
2018 Case CX37C
$49,000
636.5 miles away - CONCORD, NH
Hours: 1765
2018 CASE CX37C EXCAVATOR WITH 1765 HOURS. EQUIPPED WITH WERK BRAU MANUAL PIN GRABBER COUPLER AND BUCKET. MACHINE IS PLUMBED FOR AUX HYDRAULICS.
Dealer Info
CONCORD, NH
636.5 miles away
2017 Yanmar VIO35-6A
$37,000
636.5 miles away - CONCORD, NH
Hours: 1266
Dealer Info
CONCORD, NH
636.5 miles away
2014 Yanmar VIO35-6A
$32,000
636.5 miles away - CONCORD, NH
Hours: 2869
2014 YANMAR VIO35-6A EXCAVATOR WITH CANOPY, 2869 HOURS, EQUIPPED WITH HYDRAULIC PIN GRABBER COUPLER, THUMB, DIGGING BUCKET, AUX HYDRAULICS EQUIPPED WITH MANUAL DIVERTERS
Dealer Info
CONCORD, NH
636.5 miles away
2005 BROCE BROOM BB250B
$15,000
636.5 miles away - CONCORD, NH
Dealer Info
CONCORD, NH
636.5 miles away
Henke 10FT
$6,900
636.5 miles away - CONCORD, NH
HENKE 10' HYDRAULIC REVERSIBLE POWER ANGLE PLOW WITH CAT IT MOUNTS FOR WHEEL LOADER, PLOW HAS BARELY BEEN USED, IT HAS JUST BEEN SITTING $6900.00
Dealer Info
CONCORD, NH
636.5 miles away
John Deere TELEHANDLER
$1,500
636.5 miles away - CONCORD, NH
Dealer Info
CONCORD, NH
636.5 miles away
of 2
Filter by State
