$184,900
354.1 miles away - WILLIAMSBURG, MI
Good Used machine with 7751 hours and a Satco harvester head
$119,900
210.2 miles away - LANSING, MI
Hours: 5024
$109,900
210.2 miles away - LANSING, MI
$72,500
218.6 miles away - LAPEER, MI
Hours: 4819
Horse Power: 65
Hours: 4819, Horse Power: 65, A/C: Yes, boomreachtype: Long / Super Long, Bucketwidth (inches): 24, New: Used, Operatingweight (pounds): 25000, Quick Attach: No, ROPS Type: Enclosed, Shippingweight (pounds): 25000, Turbo: Yes
$66,500
247.2 miles away - HOLLAND, MI
Hours: 1009
Hours: 1009, Arms: Long Arm, Blades: w/ Blade, Buckets: 24" Bucket, New: Used, Operator Station: Cab w/ AC, Tracks: Standard Track
$44,000
451.0 miles away - ESCANABA, MI
Hours: 14882
Cab w/ AC; Low Ground Pressure; 34" Pads; Torque Convtr Trans; 159" Blade
$43,500
218.6 miles away - LAPEER, MI
Hours: 2619
Horse Power: 66
Hours: 2619, Horse Power: 66, Fuel Type: Diesel, Bucket: Yes, Bucketsize (inches): 72, Capacity (pounds): 2300, frontelectric: Yes, New: Used, Operatingweight (pounds): 8000, Quick Attach: Yes, ROPS Type: Open, Shippingweight (pounds): 8000, Tracksize (inches): 16
$37,500
247.2 miles away - HOLLAND, MI
Hours: 2747
CAB, HEAT/AC, POWER TATCH, 16" WIDE MULTI BAR TRACKS AND SPROCKETS AT 75%, AIR RIDE SEAT, BUCKET, LED DISPLAY, BACK UP CAMERA, AUX HYDRAULICS
$33,500
218.6 miles away - LAPEER, MI
Hours: 2688
Horse Power: 71
Hours: 2688, Horse Power: 71, Bucket: Yes, Bucketsize (inches): 72, Capacity (pounds): 3200, frontelectric: No, New: Used, Operatingweight (pounds): 9000, Quick Attach: Yes, ROPS Type: Open, Shippingweight (pounds): 9000, Tracksize (inches): 12
$29,900
210.2 miles away - LANSING, MI
Hours: 4288
Good trade in from Local Contractor, Engine replaced 200 hours ago at Dealership.
$29,500
218.6 miles away - LAPEER, MI
Hours: 2804
Horse Power: 30
Hours: 2804, Horse Power: 30, A/C: Yes, Armlength (inches): 60, Bucketwidth (inches): 24, Drive Type: Track, New: Used, Operatingweight (pounds): 8200, Quick Attach: No, ROPS Type: Enclosed, Shippingweight (pounds): 8200, Turbo: No
$7,250
218.6 miles away - LAPEER, MI
Caterpillar PR184 Power Rake, Universal Skidsteer Quick Tach, 2 Line Std. Flow Hyd., 84" Working Width, Carbide Teeth, Power Angle, Weighs 1050lbs, Dirt Shields, Tested/Works Great, Power Angle Not Hooked Up, Good Condition
$4,500
218.6 miles away - LAPEER, MI
Cat 320L Bucket, 24" Wide, 80MM Pins, 12" Boom Spread, 18" Center To Center, New
$3,950
218.6 miles away - LAPEER, MI
Toft Skeleton Bucket, 42" Wide, Fits Caterpillar 315 Excavators And Others, Weighs 1100lbs, 8 3/4" Boom Width, 16" Pin Center To Center, 2 9/16" Pin Size, New Condition
$3,950
206.3 miles away - DRYDEN, MI
LP
$3,650
218.6 miles away - LAPEER, MI
Capacity (kilowatts): 100, Fuel Type: Natural Gas, Hours: 1678, New: Used, revolutionsperminute: 1800, Shippinglength (feet): 8.5, Shippingwidth (inches): 28
$3,500
218.6 miles away - LAPEER, MI
Cat Quick Tach Wheel Loader Forks, 7' Wide Carriage, 48" Forks, 21" Hook Center To Center, From Pin Center To Hook 23", 2" Bottom Pin Hole, Forks Mounted On 2 1'2" Bar, Not Sure What Loader These Fit Check Dimensions
$3,500
218.6 miles away - LAPEER, MI
Cat Quick Tach Wheel Loader Forks, 7' Wide Carriage, 60" Long Fork Tines, 21" Hook Center To Center, From Pin Center To Hook 23", 2" Bottom Pin Hole, Forks Mounted On 2 1/2" Bar, Not Sure What Machine These Fit Check Dimensions
$2,950
218.6 miles away - LAPEER, MI
Future FT-R336C Frost Tooth, Fits Caterpillar 336 Excavators And Others, Replaceable Tooth, 15 1/4" Boom Width, 3 9/16" Pin Size, 19" Pin Center To Center, New Condition
$2,950
218.6 miles away - LAPEER, MI
Caterpillar 4 in 1 Bucket, Universal Skidsteer Quick Tach, 73" Wide, Was Used On A Cat 908 Wheel Loader
$2,850
218.6 miles away - LAPEER, MI
Giyi Ripper Attachment, Fits Caterpillar 320 Excavators And Others, 80MM Pins, Replaceable Tooth, 18" Pin Center To Center, 12" Boom Width, Weighs 895lbs, Model Number GY-R320C, New Condition
$2,650
218.6 miles away - LAPEER, MI
Cat Wheel Loader Forks, 7' Wide Carriage, 48" Fork Tines, Forks Mounted On Round Bar, 22 1/2" Hook Center To Center, 21 1/2" From Pin Center To Hook, 2" Bottom Pin Hole, Not Sure What Machine These Fit Check Dimensions
$2,450
218.6 miles away - LAPEER, MI
Caterpillar Ditching Bucket, Fits Cat 215D Excavator, 60" Wide, 11 1/2" Boom Width, 3" Top Pin, 2 3/4" Bottom Pin, Welded On Cutting Edge, Good Condition
$1,950
218.6 miles away - LAPEER, MI
Caterpillar Excavator Bucket, 36" Wide, Comes With Pins, 2" 50mm Pins, 8" Boom Width, 12" Pin Center To Center, Fits Cat 308 Excavator And Others
$1,450
218.6 miles away - LAPEER, MI
Cat Mini Excavator Thumb, Fits Cat 304C CR Excavator, 18" Wide, 1 5/8" Boom Pin, 11 1/2" Width Over The Bucket, Weighs 202lbs, Needs One Hose, Cat Brand Thumb, Good Condition
$825
218.6 miles away - LAPEER, MI
Toft Frost Tooth, Fits Caterpillar 306/307 Excavators And Others, 1 3/4" Pins, 6 1/8" Boom Width, 10 1/4" Pin Center To Center, Replaceable Tooth, Weighs 275lbs, New Condition
$750
218.6 miles away - LAPEER, MI
Caterpillar Backhoe Bucket, 36" Wide, Fits Cat 420D Backhoe, 10" Boom Spread, 8 1/4" Bottom Spread, 2" Top Pin, 1 3/4" Bottom Pin, Good Condition
$450
218.6 miles away - LAPEER, MI
Caterpillar Backhoe Bucket, 18" Wide, Fits Cat 420D Backhoe, 10" Boom Spread, 8 1/4" Bottom Spread, 2" Top Pin, 1 3/4" Bottom Pin, Good Condition
$54,900
210.2 miles away - LANSING, MI
Contact for Price
210.2 miles away - LANSING, MI
hours: 4740
CATERPILLAR 140M3, Trade in from a local road commission. loaded with options, including Grade Control.
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.