2023 Arts-Way 664
$19,900
138.2 miles away - WILKINSON, IN
New Arts Way 664 Top-Spread bale processer, Reasonable delivery anywhere in USA!! Process up to a 5x6 round bale or a 4'x4'x6' large square bale, requires 20 gallons per minute hyd. flow, weighs 2060 lbs., requires 2500lb lift capacity or greater on loader, comes with standard 14 pin electrical connector, in stock!! The 664 bale processor is built with tight spaces in mind. The full length across your skid steer is 103 inches. It extends out from your skid steer 67 inches – holding up to a 5′ x 6′ round bale or a 4′ x 6′ square bale. The deflector door is adjustable to lower during transport and raise up when spreading. The 664 weighs 2,060 pounds. Standard connections include a set of flat face standard flow hydraulic ends. The system has a built in “case-drain” return line, so no third line is needed on your machine. A standard 14 pin electrical connection is included to connect directly to your loader, if you have one available (please keep in mind you can NOT connect directly to a Bobcat – they require a signal adapter.) Easily change the pin position to match the brand of your loader. If you do not have an electrical connection, add a wiring harness that installs a bump switch in your cab to move the floor chain back and forth. A loader with at least 2,500 pounds lift capacity and 20 gpm of hydraulic flow or more is required to operate this machine. Generally this is a mid-sized skid steer such as a John Deere 325, Bobcat 650, Kubota 75, etc.
`
Filter by State
