Primary Contact
Equipment Listings
Contact for Price
1347.1 miles away - BILLINGS, MT
Skidsteer mount • Designed to grind 4"-6" diameter material • Patented tooth design with cross bar across the full width to help retain tooth in tooth holder • Both carbide and claw teeth are available in double-sided (reversible) sets for extended life • Rotor operates at 2,000 RPM and has 4 second recovery time from dead stall stop • 44 cutting hammers on the rotors can be changed with impact wrench in less than 45 minutes • On-board pressure gauge easily viewed from operator's station to monitor system pressure • Deflector door helps control particle size and discharge direction • Replaceable abrasion-resistant AR400 wear plate on skid shoes • Low-profile design
$3,045
1347.1 miles away - BILLINGS, MT
NEW NH 60COBB ROTARY BROOM HYD ANGLING KIT MOUNTING FRAME NEW UNIT
$26,000
1347.1 miles away - BILLINGS, MT
Transmission: Manual
Horse Power: 69
Transmission: Manual, Horse Power: 69, Power Steering: Yes, A/C: No, Basegroundclearance (inches): 12, Bucket: No, Cab: No, cargobed: Yes, Cargobedcapacity (pounds): 2200, cargobedtype: Utility, Differential Lock: Yes, Drive Type: 4WD, dumpbed: Yes, dumpbedlifttype: Hydraulic, Fuelcapacity (gallons): 13.2, Miles (miles): 147, New: Used, Number of Passengers: 3, Operatingweight (pounds): 2380, Payloadcapacity (pounds): 2200, Power Type: Engine Powered, Shippingheight (inches): 83, Shippinglength (inches): 141, Shippingweight (pounds): 2380, Shippingwidth (inches): 60, Speed (miles/hour): 45, Towingcapacity (pounds): 2200, Wheel Type: Tires
$165,500
1347.1 miles away - BILLINGS, MT
Hours: 62
Hours: 62, A/C: No, Articulating: Yes, Basedrivespeed (miles/hour): 7.5, bladetilt: No, Centrifugalforce (pounds): 53954, cleanerbar: Yes, Drumdiameter (inches): 59, Drumwidth (inches): 84, fops: Yes, gradeability: 60, gradeabilitylow: 40, Horse Power: 128, levelingblade: No, New: New, Operatingweight (pounds): 24008, oscillatingdrum: No, ROPS Type: Open, splitdrum: No, telematics: Yes, temperaturesensor: No, variableamplitude: Yes, variablefrequency: Yes, Vibrationamplitudehigh (inches): 0.075, Vibrationamplitudelow (inches): 0.039, Vibrationcentrifugalforcelow (pounds): 36419, Vibrationfrequencyhigh (vibrations/min): 2040, Vibrationfrequencylow (vibrations/min): 1800, vibratorydrum: Yes, watersystem: No
$19,850
1347.1 miles away - BILLINGS, MT
NH MONITOR; 3'x3' BALE SIZE 1000 PTO; HYDRAULIC PICK-UP LIFT; STANDARD PICK-UP; TIRES: 600/55-22.5 @ 50%; 44,500 BALES
$40,000
1347.1 miles away - BILLINGS, MT
Transmission: Automatic
Transmission: Automatic, Power Steering: Yes, A/C: No, Basegroundclearance (inches): 12, Bucket: No, Cab: No, cargobed: Yes, Cargobedcapacity (pounds): 2200, cargobedtype: Utility, Differential Lock: Yes, Drive Type: 4WD, dumpbed: Yes, dumpbedlifttype: Hydraulic, Horsepower (kilowatt): 15, Miles (miles): 132, New: Used, Number of Passengers: 3, Operatingweight (pounds): 2380, Payloadcapacity (pounds): 2200, Power Type: Engine Powered, Shippingheight (inches): 83, Shippinglength (inches): 141, Shippingweight (pounds): 2380, Shippingwidth (inches): 60, Speed (miles/hour): 27, Towingcapacity (pounds): 1200, Wheel Type: Tires
$3,350
1347.1 miles away - BILLINGS, MT
Hydraulic Quick Coupler, Fits up to a CASE CX57C and CX60C
Contact for Price
1347.1 miles away - BILLINGS, MT
NEW 72" BOX BLADE, 5 SHANK, CAT 1 3PT, IF INSTALLED BUSHINGS COULD UP TO CAT 2
$51,000
1347.1 miles away - BILLINGS, MT
SKID STEER ATTACHMENT, CASE BRANDED LEVELBEST GRADER ATTACHMENT, 108" BLADE WIDTH, ROTATION = +/- 30 DEGREES, MAX TILT = 24 DEGREES, SIDE SHIFT = +/- 13 DEGREES, COMES WITH DUAL MAST LEICA LASER RECEIVERS, CONTROL PANEL
$10,742
1347.1 miles away - BILLINGS, MT
MAKE US AN OFFER Angle Broom #48159720 is ideal for street cleaning, parking lot maintenance, road maintenance clean-up, bridge deck clean-up, jobsite clean-up and snow removal. Includes an installed hydraulic angle kit. • Parking stands • Angles 30º right or left • 32” brush diameter • 50/50 poly/wire brush core • Integral nozzle mounting for water application • Bolt-together hood for simple, less costly replacement • Quick-change brush without breaking hydraulic lines
Contact for Price
1347.1 miles away - BILLINGS, MT
Skidsteer mount MODEL RK6015 WORKING WIDTH 60" / 1524mm OVERALL WIDTH 71" 1803mm WEIGHT 1465lbs / 665kg FLOW RANGE (GPM) 17 - 34 FLOW RANGE (LPH) 64 - 114 MAX PRESSURE (PSI) 4000 MAX HORSEPOWER 75* NUMBER OF TOOLS 26 ROTOR DIAMETER 15" / 381mm ROTOR SPEED (RPM) 2400 ROTOR BEARING SIZE (MM) ST65 MOTOR 1 x 45V
Contact for Price
1347.1 miles away - BILLINGS, MT
NEW 72" BOX BLADE, 5 SHANK, CAT 1 3PT, IF INSTALLED BUSHINGS COULD UP TO CAT 2
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|---|---|---|---|
| Case IH |
|
|
|
|
| New Holland |
|
|
|
|
Show More
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.