Founded in 1984, Hurricane Ditcher is a family-owned and operated manufacturer of ditching, terracing, and waterway management equipment with a dealer network spanning 31 states and Canada.
Headquartered in Vincennes, Indiana, Hurricane Ditcher machines are built to correct poor drainage issues for farmers, county/township highway departments, and custom drainage operators everywhere.
Primary Contact
Equipment Listings
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher Baby Side-Arm is designed to clean and maintain road, irrigation and drainage ditches. 26" 5-paddle impeller. Cat. II or III quick hitch adaptable. Soil spread 40' - 60'. Minimum 90HP required. Can reach out up to 10-1/2' from center and down up to 5'. Options available: tail wheels; hydraulic deflector shield; deflector shield extension; 540 RPM PTO. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher Original Side-Arm is designed to clean and maintain road, irrigation and drainage ditches. 42" 9-paddle impeller. Cat. III quick hitch adaptable. Soil spread up to 65'. Minimum 150HP required. Standard tail wheels. Can reach out up to 14' from center of machine and down up to 9'. Standard 1000 RPM PTO. Options available: hydraulic deflector shield; deflector shield extension. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher 3Pt42 is designed to work in trashy conditions (sod, stalks, etc.) to make surface drainage ditches and clean small road ditches. Easily connect lateral ditches to main ditch. 42" 9-paddle impeller. Cat. II or III quick hitch adaptable. Easily laser adapted. Soil spread 40' - 60'. Minimum 125HP required. Standard ripper tooth, rotating tail wheel and 1,000 RPM PTO. Optional deflector or terracing shield available. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher 3Pt20 ditcher is designed to make surface drainage ditches and clean small road ditches. 20" 6-paddle impeller. Cat. II or III quick hitch adaptable. Soil spread 25' - 50'. Minimum 60HP required. Options available: 18" cutting edge with 20" 4-paddle impeller; ripper tooth (for extremely hard conditions); deflector shield (to control soil distribution); 540 RPM PTO. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher Swinger is a 3Pt hitch offset ditcher designed to make surface drainage ditches and small roadside ditches. It can swing behind either tractor tire or any position in between. 20" 6-paddle impeller. Cat. II or III quick hitch adaptable. Soil spread 25' - 50'. Minimum 80HP required. Options available: 15" 5-paddle impeller; 540 RPM PTO. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Model 24 is a pull-type ditcher-terracer designed to make surface drainage ditches, to construct and clean waterways, and to build and maintain terraces using your own farm tractor. The Model 24 has a 36″ 4-paddle impeller (digging wheel) with a 24″ cutting edge. The paddles are made of T1 steel for longer life, but are easily replaceable when worn. The cutting edge is also easily replaceable when worn. The optional terracing shield with extension controls dirt for building and reshaping terraces. It allows soil to be placed within 7 feet of the machine or controlled up to 30 feet for broad based terraces. The optional deflector shield allows soil to be placed within 7 to 12 feet of the machine.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Storm Ditcher is a Small 3-point for compact tractors. Requires 30 to 100 Hp. Equipped for 540 or 1000 PTO. Adaptable to cat 1 or 2 quick hitch. 8" or 12" impeller wheel. To cut down on the shock and vibration, the 8" impeller wheel is uniquely designed with three T1 cutting paddles and three cleanout paddles. The 12" wheel has four of each. The drag plate is rolled to the contour of the impeller wheel to prevent ditches from collapsing. It also prevents gouging and promotes smooth ditcher operation. The gearbox is equipped with a double 60 roller chain, runs in an oil bath, and has a manually adjusted idler for chain tension. The PTO is shear bolt protected.
Contact for Price
260.1 miles away - VINCENNES, IN
The Offset 26 was designed to use in area's where it is difficult to straddle the ditch. the offset 26 is offered in left or right hand. Each machine has access doors on top and side that allows easy access to the internal components. the gearbox consist of large shafts, heavy duty sprockets, bearings, and double-80 roller chain; all enclosed and running in an oil bath. An external idler adjustment is easily accessible and should be used for chain tensioning. The impeller wheel is 26" diameter it contains five hard-surfaced paddles for longer life. Each paddle is designed to be re-surfaced as it wears.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher Ditch Angel is designed to clean, and maintain road, irrigation and drainage ditches. 26" 5-paddle impeller. Cat. II or III quick hitch adaptable. Soil spread 30' - 50' out the right side of the machine. Minimum 90HP required. The Ditch Angel can reach out up to 11' from center of machine and down up to 5'. Options available: tail wheels; hydraulic deflector shield; deflector shield extension; 540 RPM PTO. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher Model 24 Ditcher/Terracer is a pull-type model for making drainage ditches, cleaning small road ditches, filling mud pits, spreading drilling mud and for building/rebuilding terraces, w-ditches and waterways. Easily laser adapted. 36" 4-paddle impeller with 24" cutting edge. Minimum 100HP required. Soil spread over 100' area or as close as 7' using optional deflector or terracing shield. Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
The Hurricane Ditcher 3Pt26 is designed to make surface drainage ditches and clean small road ditches. 26" 5-paddle impeller. Cat. II or III quick hitch adaptable. Soil spread 25' - 50'. Minimum 70HP required. Options available: ripper tooth (for extremely hard conditions); deflector shield (to control soil distribution). Call for pricing.
Contact for Price
260.1 miles away - VINCENNES, IN
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|---|---|---|---|
| Hurricane |
|
|
|
|
Show More
