Primary Contact
Equipment Listings
Contact for Price
272.7 miles away - PHILO, IL
NEW BLU-JET 6020 ANHYDROUS AMMONIA APPLICATOR BUILT FOR HIGH-RATE, HIGH-ACREAGE USE! THE AT6020 COMMERCIAL CLASS FERTILIZER APPLICATOR FEATURES A HEAVY-DUTY FRAME AND TOOLBAR DESIGN THAT WILL ENSURE YOU GET THE JOB DONE DURING THE NARROW APPLICATION WINDOW. THE AT6020 FERTILIZER APPLICATOR FEATURES WIDTHS FROM 42' TO 62.5' WITH 20" OR 30" ROW SPACING, DEPENDING ON MODEL. HEAVY DUTY 6X6 FRAME. WING FLEX OF 15 DEGREES UP AND 9 DEGREES DOWN. SINGLE-POINT MANUAL ADJUST DEPTH CONTROL. UPGRADED TIRE PACKAGES COME STANDARD WITH TALL TRACTOR TIRES AVAILABLE. SUPER 1200 COULTERS. EDGE-BENT SHANKS. RAVEN VORTEX AND CONTINENTAL COOLERS AVAILABLE. SINGLE OR DUAL INLET OPTIONS FOR PULLING DOUBLE AMMONIA TANKS. HIGH FLOW CONTINENTAL MANIFOLDS AVAILABLE.
Contact for Price
272.7 miles away - PHILO, IL
The BLU-JET AT4010 is specifically designed to give the operator an ideal balance of stability, tracking, durability, versatility, and customizable features. The chassis and toolbar are designed to accept varying row spacings and swath widths to match planters from 30' to 60'. The 1400 gallon cone bottom tank provides capacity for covering a good number of acres between fills, and the large tractor style tires increase floatation when compared to smaller tires on competitive units. Individual farmers, custom applicators, and rental fleet operators have all found the BLU-JET AT4010 an ideal fit for their businesses. Please call us at with any questions!
$64,250
272.7 miles away - PHILO, IL
Capacity (gallons): 1775, Height (inches): 150, Length (inches): 188, New: New, Rowspacing (inches): 30, Weight (pounds): 13100, Width (feet): 58
Contact for Price
272.7 miles away - PHILO, IL
***TWO IN STOCK READY TO GO FOR SPRING 2022!*** The BLU-JET AT3015 is specifically designed to give the operator an ideal balance of stability, tracking, durability, versatility, and customization features. The chassis and toolbar are designed to accept varying row spacings and swath widths to match planters from 30' to 40'. Model 3015 features an elliptical tank for a low-profile design and is mounted perpendicular to the hitch for increased stability. Individual farmers, custom applicators, and rental fleet operators have all found the BLU-JET AT3015 an ideal fit for their businesses. Please call us at for more information!
Contact for Price
272.7 miles away - PHILO, IL
The Charger II-SF Side-Discharge Tender is efficient, unloading up to 4,000 pounds per minute. The discharge auger rests on the fender for safe and easy transport. A hydraulic cylinder folds the discharge tube out to the unloading position. Another hydraulic cylinder raises or lowers the discharge tube to the desired height. Standard equipment ◾9″ carbon steel floor auger with adjustable speed control ◾15’ hydraulic side folding 9” carbon steel discharge auger ◾Clean-out doors under each compartment ◾Pit dump slide gate on base of discharge auger ◾Stainless steel dump gates, transitions and auger tubes ◾12 gauge stainless steel tube with removable end caps under the hopper assembly ◾Floor auger has adjustable speed controls to allow for different density materials ◾Augers are constructed with mild steel helicoid auger flighting and mild steel pipe Please call us at with any questions!
Contact for Price
272.7 miles away - PHILO, IL
ENDURAPLAS POLY TANKS * Designed Better, Built Stronger, Last Longer * Vertical Storage Tanks 100 gal. - 10,000 gal. * Horizontal Leg Tanks 110 gal - 10,000 gal * Cone Bottom Tank w/ Metal Stands 550 gal - 10,000 gal Check out the Enduraplas differences at enduraplas .com
$113,204
272.7 miles away - PHILO, IL
Fall, pre-plant or side-dress applications all covered by the Blujet Legacy 19 Row Commercial Class Anhydrous Applicators, Ready to go to Work. Heavy duty 6" x 6" main frame, 47.5' swath width, Side Dress tire package, 380/85R34's, dual spring bundle row units with super 1200 coulters with 20" fluted blades, edge bent shanks come standard with every bar. Dual Continental SS Coolers with Continental Vertical Dam distribution on bars with options of 3/8" plumbing package. Dual 1.5" Supershooter on rear end for Nurse Tank connections. Comes with Raven Product Control Node.Priced picked up in Brookston, $113,204.00
Contact for Price
272.7 miles away - PHILO, IL
SS-429 Conveyor * Portable Fertilizer Belt Conveyor * Unload Up To 2.5 Tons Per Minute * 24" Wide Belt * 13' 6" Discharge Height * 25 HP Kohler Fuel Injected Gas Engine * Optional Hydraulic Mover
Contact for Price
272.7 miles away - PHILO, IL
The Charger II-SF Side-Discharge Tender is efficient, unloading up to 4,000 pounds per minute. The discharge auger rests on the fender for safe and easy transport. A hydraulic cylinder folds the discharge tube out to the unloading position. Another hydraulic cylinder raises or lowers the discharge tube to the desired height. Standard equipment ◾9″ carbon steel floor auger with adjustable speed control ◾15’ hydraulic side folding 9” carbon steel discharge auger ◾Clean-out doors under each compartment ◾Pit dump slide gate on base of discharge auger ◾Stainless steel dump gates, transitions and auger tubes ◾12 gauge stainless steel tube with removable end caps under the hopper assembly ◾Floor auger has adjustable speed controls to allow for different density materials ◾Augers are constructed with mild steel helicoid auger flighting and mild steel pipe Please call us at with any questions!
$67,000
272.7 miles away - PHILO, IL
2017 Chandler 40PT Fertilizer Lime Spreader Complete new belt over bar. Now ISO control system. New motor and pump seal kits. Unit is ready to go to the field. For more information call Lucas @
Contact for Price
272.7 miles away - PHILO, IL
CAPACITIES • Hopper capacity (water level) 496 Cubic Ft (14 05 Cubic Meters) • Payioad (water level) 32240 Lbs. (14625 Kilograms) • Hopper capacity (heaped tarped) 560 Cubic Ft (15 9 Cubic Meters) • Payioad (heaped, tarped @ 65# materia' 36400 Lbs. (16510 Kilograms) HOPPER DIMENSIONS Hopper length 16 Ft (4 88 Meters) Hopper width 8 Ft. (2 44 Meters) Hopper height above truck Irame . .. 7 Ft (2 13 Meters) Please call us at with any questions!
Contact for Price
272.7 miles away - PHILO, IL
The Charger II-SF Side-Discharge Tender is efficient, unloading up to 4,000 pounds per minute. The discharge auger rests on the fender for safe and easy transport. A hydraulic cylinder folds the discharge tube out to the unloading position. Another hydraulic cylinder raises or lowers the discharge tube to the desired height. Standard equipment ◾9″ carbon steel floor auger with adjustable speed control ◾15’ hydraulic side folding 9” carbon steel discharge auger ◾Clean-out doors under each compartment ◾Pit dump slide gate on base of discharge auger ◾Stainless steel dump gates, transitions and auger tubes ◾12 gauge stainless steel tube with removable end caps under the hopper assembly ◾Floor auger has adjustable speed controls to allow for different density materials ◾Augers are constructed with mild steel helicoid auger flighting and mild steel pipe Please call us at with any questions!
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|---|---|---|---|
| Blu-Jet |
|
|
|
|
| Chandler |
|
|
|
|
| Continental Nh3 Products |
|
|
|
|
| Dalton Ag Products |
|
|
|
|
| Raven |
|
|
|
|
| Rego |
|
|
|
|
| Shields Equipment |
|
|
|
|
| Squibb Taylor |
|
|
|
|
| Yetter Farm Equipment |
|
|
|
|
Show More
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.