Primary Contact
Equipment Listings
Contact for Price
362.2 miles away - MILTON, WI
Trailer Length: 40’ Width: 8’ Main Frame: 14 Inch @ 43 # w/ 6” Bridge from neck to suspension King Pin Setting: 18” King Pin Height: 49” Suspension: Hutch 9700 – 25,000 # Axles: Two (2) 71 ½” Track @ 25,000 Capacity Each Hubs: Budd 10 Hole Wheels: 22.5 Budd Steel Wheels Tires: 255/70R 22.5 (11R22.5) Radial Tires Brakes: Spring Brake on Air Landing Gear: 2 Speed Crank Down Bumper: DOT approved with Mud flaps Lights: Sealed Beams Trailer Weight: 8,500 # Hopper Length: 24’ Width: 96” Number of Hoppers: 3 Compartments: 6 Capacity: 24 – Tons (based on 65# per cubic ft. material) Empty Weight: 8,000 # (hopper only) Auger and Tube Assembly Auger Tube: 10” 304 Stainless Steel Auger: 9 ½”– 304 Stainless Steel Flighting and Pipe Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
CHANDLER PT12FSS 14L x 16.1 Tires Hydraulic Engage Press Wheel 50' Spread Pattern
Contact for Price
362.2 miles away - MILTON, WI
The BLU-JET SubTiller 4 lifts and fractures hardpan and wheel compaction caused by heavy equipment. The deep penetrating shanks, 14" to 18", fracture up to 20" on either side of the shank with minimal surface disturbance. Large 20" spring cushion coulters easily cut through heavy trash. When crop residue is only slightly disturbed, erosion is controlled. This year round conservation tillage tool helps you maximize moisture absorption, reduce runoff and keep the water available during the growing season. Engineered for maximum performance, the InLine shank design increases lifting and fracturing of compacted soil. Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
8 TON FERTILIZER/LIME SPREADER CARBON STEEL WITH STAINLESS STEEL AT CRITICAL CORROSION POINTS, 1X1 STAINLESS STEEL MESH CONVEYOR CHAIN 20" WIDE, 19L TIRES WITH TORSION AXLES, MECHANICAL DRIVE CONVEYOR WITH HYDRAULIC ENGAGE, HYDRAULIC SPINNERS PLUGGED TO TRACTOR OR PTO SPINNERS.
Contact for Price
362.2 miles away - MILTON, WI
CAPACITIES • Hopper capacity (water level) 496 Cubic Ft (14 05 Cubic Meters) • Payioad (water level) 32240 Lbs. (14625 Kilograms) • Hopper capacity (heaped tarped) 560 Cubic Ft (15 9 Cubic Meters) • Payioad (heaped, tarped @ 65# materia' 36400 Lbs. (16510 Kilograms) HOPPER DIMENSIONS Hopper length 16 Ft (4 88 Meters) Hopper width 8 Ft. (2 44 Meters) Hopper height above truck Irame . .. 7 Ft (2 13 Meters) Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
Hopper Construction: Available in three types of material: Mild Steel, 409 Stainless Steel, and 304 Stainless Steel Conveyor Specs: Available in three types: 24” - 1” x 1” Mesh Type-304 Stainless Steel, Bar Type Chain and Belt Over – Bar type Chain Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
The Chandler Pull-Type Fertilizer Spreader is durable, heavy-duty and well designed for long-lasting, trouble-free service. The design and construction quality of this spreader sets the standard in the agri-business industry. This unit is offered in corrosive-resistant 304 stainless steel. This pull-type spreader has been quality checked and tested to provide the best possible spread pattern for your requirements. Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
Hopper Construction: Available in three types of material: Mild Steel, 409 Stainless Steel, and 304 Stainless Steel Conveyor Specs: Available in: Bar Type Chain and Belt Over – Bar type Chain Spinner Specifications: 4- Blade configuration with dished type spinners and a specially designed flow divider for wide swath applications. (50’ Lime – 80’ Fertilizer) High Pressure, Double Bearing spinner motors mounted over-head keeps motors out of fertilizer and other contaminants for longer life. Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
New 2024 Chandler 16 Ton Rear Discharge Tender. 304 Stainless Steel Construction, Two Compartment, Agri Cover SRT-2 Roll Tarp.
Contact for Price
362.2 miles away - MILTON, WI
◾Box material and gussets all stainless steel above the frame ◾ Axle adjustable from 78" to 120" ◾Heavy Duty 10-bolt hubs ◾Dual spinner fans with bolt on blades ◾8" Stainless Steel Apron Chain ◾5000# swivel jack ◾The 2-speed conveyor drive system allows a wide range of application rates ◾Safety guard around fans ◾Hitch with heavy duty safety chain ◾Hydraulic On/Off for Conveyor ◾Ground clearance=40" under spinners & 47" under frame ◾Overall Height = 112" with 380 x 46" tires ◾Overall Length = 215" ◾Overall Width at 120" Track = 136" with 380 x 46" tires ◾Fitted Roll Tarp - heavy duty vinyl Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
The Charger II-SF Side-Discharge Tender is efficient, unloading up to 4,000 pounds per minute. The discharge auger rests on the fender for safe and easy transport. A hydraulic cylinder folds the discharge tube out to the unloading position. Another hydraulic cylinder raises or lowers the discharge tube to the desired height. Standard equipment ◾9″ carbon steel floor auger with adjustable speed control ◾15’ hydraulic side folding 9” carbon steel discharge auger ◾Clean-out doors under each compartment ◾Pit dump slide gate on base of discharge auger ◾Stainless steel dump gates, transitions and auger tubes ◾12 gauge stainless steel tube with removable end caps under the hopper assembly ◾Floor auger has adjustable speed controls to allow for different density materials ◾Augers are constructed with mild steel helicoid auger flighting and mild steel pipe Please call us at with any questions!
Contact for Price
362.2 miles away - MILTON, WI
CHANDLER 26CLPT 26' PULL TYPE LITTER AND SHAVINGS SPREADER 16,000 LBS TANDEN HENSCHEN AXLES WITH 21.5 X 16.1 TIRES, SELF CONTAINED OR PLUG TO TRACTOR HYDRAULICS OR MECHANICAL DRIVE SYSTEMS. WITH OR WITHOUT HINGED REAR END OR REAR END GATE. RED OR GREEN CHANDLER 45 PT-FTLH EXW FERTILIZER AND LIME SPREADER, 850/50-30.5 TIRES, SPREAD PATTERNS OF UP TO 90' OF FERTILIZER AND 60' OF LIME, TANDEM AXLE WALKING BEAM SUSPENSION, 304 STAINLESS STEEL, BELT OVER-BAR CHAIN, CAPACITY OF 15 TON OF FERTILIZER AND 20 TON OF LIME
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|---|---|---|---|
| Blu-Jet |
|
|
|
|
| Chandler |
|
|
|
|
| Continental Nh3 Products |
|
|
|
|
| Dalton Ag Products |
|
|
|
|
| Raven |
|
|
|
|
| Rego |
|
|
|
|
| Shields Equipment |
|
|
|
|
| Squibb Taylor |
|
|
|
|
| Yetter Farm Equipment |
|
|
|
|
Show More
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.