Primary Contact
Equipment Listings
Contact for Price
321.7 miles away - ATHENS, TN
Coolair quality and our unique blade design at a savings to you and your customers. The NCF Fans are the answer to your ventilation requirements. We utilize our innovative drive assembly which applies power through V-belts directly to the propeller. Blade load is concentrated directly over the bearings for more economical operation and longer bearing life. Performance and efficiency are the keynotes to the Coolair NCF Fans. for all dairy or ventilation needs.
Contact for Price
321.7 miles away - ATHENS, TN
Transmission: Hydro
Horse Power: 35
Drive Type: MFWD
Transmission: Hydro, Horse Power: 35, Drive Type: MFWD, New: New, Backhoe: No, Loader: Yes, Loader Make: Kioti, midmountmower: No, ROPS: Yes
Contact for Price
321.7 miles away - ATHENS, TN
text4233687753 15 ton Dirt Boss is ruggedly built to handle dirt, stones, manure & grain. The hydraulic tail gate opens 3’ above the sides for no-obstruction dumping. Dump box dimensions: 7 1/2’ wide x 16’ long with 2 1/2’ high sides Heavy duty formed steel deck & sides Brackets for planks to extend height of sides up to 12 inches Single telescopic hydraulic cylinder - Hoses included Hydraulic tail gate with grain door Swivel hitch & safety chains 12,000 pound drop leg jack 12,000 pound, 8-bolt hubs & spindles 445/50R 22.5" used truck tires
Contact for Price
321.7 miles away - ATHENS, TN
$ 500 off through Christmas New trailer 24ft x 7ft wide 7K torflex axles brakes both axles, rubber flooring, full escape door, spare tire & wheel, butterfly gates. text4233687753 or4233687755
Contact for Price
321.7 miles away - ATHENS, TN
•Quick-adjust Swing Arms – Allow you to easily change the amount of soil disturbance from simple aeration to more aggressive renovations. Five settings available for 0 to 10 degrees of offset. text4233687753 •Solid Steel Shafts – Rollers constructed of solid steel shaft, combined with individually replaceable “lean and twist” tines make the roller durable and easy to maintain. text4233687753 or4233687755 Benefits: •Extremely Versatile – Quick Adjust feature allows you to vary the roller swing angle between 0 and 10 degrees, enabling you to fine tune your setting for aeration, renovation, overseeding or pre-working your fields. •Great Value, Saves Resources – One implement that can do many jobs. Get the maximum benefit out of your inputs and achieve a better root system that results in higher yields. •Use All Season – Aerate, warm, and loosen soils in the spring, then relieve compaction or renovate after each hay cutting during the rest of the season. •Very Dependable – Designed and built to withstand demanding field conditions and provide years of reliable service. •Increased Yields – Better quality grass or hay results in more weight gain and healthier animals.
Contact for Price
321.7 miles away - ATHENS, TN
McHale V6740 is a semi-automatic variable chamber baler which is fitted with a heavy-duty rotor. It is equipped with a double drive system which allows the machine to operate in the toughest of conditions. The double drive system aids belt rotation and bale formation. The machine comes with centralized grease blocks as standard. Automatic greasing is available as an option on all V6740 machines. Net and bale density can be adjusted from the cab through the Expert Plus control console. call or text4233687753
Contact for Price
321.7 miles away - ATHENS, TN
The McHale V8950 is a semi-automatic variable chamber baler which is fitted with a 15 knife chopper unit and heavy-duty rotor. It is equipped with a double drive system which allows the machine to operate in the toughest of conditions. The double drive system aids belt rotation and bale formation. The machine comes with centralized grease blocks as standard. Automatic greasing is available as an option on all V8950 machines. Net and bale density can be adjusted from the cab through the Expert Plus control console. The machine is fitted with 500/50-22.5 tires as standard text4233687753 or4233687755
Contact for Price
321.7 miles away - ATHENS, TN
The TL1000R is a Single Bale Wrapper with Category II 3 Point Hitch and Hydraulic Drive, adjustable for bales from 4' x 4' to 5' x 5'6". text4233687753
Contact for Price
321.7 miles away - ATHENS, TN
rebate & financing available call or text4233687753 ECV Exclusive Features Soft Start Bale Counter (Lifetime) Bale Counter (Re settable) Bale Presets Large Easy to Read Display Remote Engine Start Self-Diagnostics Single Joystick Control to drive/steer Other Standard Features Main Control Panel Wired for Field Installed Options Safety Shut Off Switch on Guards Safety Shut Off Switch on Panel Retractable Tongue Folding Tongue Electric Start 13HP Honda Gas Engine (18 Amp Charging System) Low Oil Alert on Engine Spark Arrestor on Engine Hydraulic Manifold Hydraulic Steering Temperature Gauge on Hydraulic Tank 25L / 6.6 USG Fuel Tank with Fuel Pump Limit Switches Adjustable Stroke Length on Charge Table Round to Square Bale Wrapper Conversion Roller Bed Locking Lever Electric over Hydraulic Controls Fully Automatic Cycling Automatically Idles Down When Cycle Completed Drive Wheel 34" Pre-Tensioner Carriers Lock Pin (Hoop) Roller Wheels Push Ram Push Ram Cylinders Cross Tube Unloading (to push off last bale) Patented King Pins with Tapered Bearings Road Lights Quick Start Hydraulic Over Centre Cam Axle Lug Tires on Rear Axle Square Bale Riser Kit to Accept 6ft. Long Square Bales Side Hill Roller Kit
Contact for Price
321.7 miles away - ATHENS, TN
HLA BK60 text4233687753 •Slice bales up to 72" in diameter •Grabs and retains plastic wrap and net wrap •Top clamp eliminates "tail" dropping into mixer •Cuts down TMR processing time up to 30% •The BK60 has an adjustable bumper to accommodate bales down to 48” •Bolt on knives for easy replacement
Contact for Price
321.7 miles away - ATHENS, TN
Call or text4233687753 STANDARD EQUIPMENT Special low construction design Kubota diesel engine, 3 cylinders, water-cooled, 18.5 kW (25 HP) Hydrostatic four wheel drive with automotive control Tyres 7.00-12 AS, offset +40 incl. reversable rims Genuine Schäffer axle Combined oil cooler Drum brake as service and parking brake Maintenance free articulated pendulum joint Restraining system for protection roof 1 x LED working headlight front Parallel lift Working hydraulics: 33 l/min, optional 42 l/min. Adjustable steering column Hour meter, fuel control lamp and temperature indicator Rear weight end plate Quick-change frame SWH with hydraulic tool lock
Contact for Price
321.7 miles away - ATHENS, TN
Malone disc mower 9ft 2" cut text4233687753 or4233687755 Galvanized curtain frame Multi-band belt driven Bronze Bushing on main pivot point Heavy duty cutter bar Tool box & full colour user manual Superior floatation Quick fit blades (new) Galvanized folding frame (new) Blade Box (new) Drive shield module (new)
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|---|---|---|---|
| AerWay |
|
|
|
|
| Anderson |
|
|
|
|
| Arrow FarmQuip |
|
|
|
|
| BAUER |
|
|
|
|
| Bush-Whacker |
|
|
|
|
| Claas |
|
|
|
|
| Danuser |
|
|
|
|
| Deutz Fahr |
|
|
|
|
| Doyle |
|
|
|
|
| Durabilt |
|
|
|
|
| Featherlite |
|
|
|
|
| Fliegl |
|
|
|
|
| HayBuster |
|
|
|
|
| Hustler |
|
|
|
|
| John B.M. Mfg |
|
|
|
|
| Kioti |
|
|
|
|
| MCHALE |
|
|
|
|
| Patz |
|
|
|
|
| Penta |
|
|
|
|
| Priefert |
|
|
|
|
| PRONOVOST |
|
|
|
|
| Reinke |
|
|
|
|
| Scag |
|
|
|
|
| Sitrex |
|
|
|
|
| STOLL |
|
|
|
|
| Tarter |
|
|
|
|
| Trioliet |
|
|
|
|
| TUBE-LINE |
|
|
|
|
Show More
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.