$205,000
862.1 miles away - TYLER, TX
A/C: Yes, AC Condition: New, attachmentmake: DENIS CIMAF, attachmentyear: 2022, Cuttingwidth (inches): 74, Horse Power: 188, Hours: 875, New: New, Quick Attach: Yes, screens: Yes
$137,890
514.3 miles away - ALBANY, NY
attachmentmake: PREDATOR, attachmentyear: 2008, Cuttingwidth (inches): 71.5, Horse Power: 99.2, Hours: 754, New: Used, screens: Yes
$125,000
348.5 miles away - MANHEIM, PA
EROPS HEAT A/C AIR SEAT RADIO REAR CAMERA 2SPEED COUPLER SUPER FLOW HIGH/LOW AUX-HYD RAYCO FM120-6R FORESTRY MOWER HYD REAR WINCH 18" RUBBER TRACKS PILOT CONTROLS
$123,255
116.2 miles away - MAUMEE, OH
NEW Rayco RG74T stump grinders in stock, 74hp Cummins diesel engine, rubber tracks, remote control, hydraulic retractable tracks system, two speed travel, 28in cutter wheel, shipping and financing available, call or email for more information. RILEY MCCLURE 419-356-3226 RMCCLURE@AGPROCO.COM
$92,525
116.2 miles away - MAUMEE, OH
NEW Rayco RG80 stump grinders in stock! Remote control, 4x4, F&R dual tires, blade, two speed travel, 23" Command Cut cutter wheel, shipping and financing available, call or email for more information. RILEY MCCLURE 419-356-3226 RMCCLURE@AGPROCO.COM
$67,455
116.2 miles away - MAUMEE, OH
BRAND NEW model from Rayco. 55 HP engine, Remote Control, 2-speed, 4x4, dual wheels, backfill blade, Command Cut with 60" cutting width! Trailer pictured extra. Shipping and financing available. Call or email for more info. RILEY MCCLURE 419-356-3226 RMCCLURE@AGPROCO.COM
$54,000
152.9 miles away - DUPONT, IN
RAYCO C100 LGP - FORESTRY MULCHER - 2016 CAT HM418C 72" HEAD, C/H/A, HIGH FLOW AUX HYD, EXTERNAL COOLER, STEEL TRACKS
$53,500
514.3 miles away - ALBANY, NY
STK#30306408: 2760# Op.Wt., 4-wheel drive with dual, front & rear wide floatation tires and 2 speed drive allow the RG55r to maintain traction in challenging conditions with minimal ground impact.. Swing away operating stand allows mobility access through gates and alleys. Folding, hydraulic blade makes backfilling easy. The 20" x 1.5"cutter wheel includes (18) RAYCO Supertooth bits capable of 14" deep cuts in a 60" swing. Call ABELE Tractor today for rental rates or to arrange purchase of this RAYCO RG55r stump grinder !
$52,500
514.3 miles away - ALBANY, NY
Cuttingdepth (inches): 14, Cuttingheight (inches): 24.5, Cuttingwidth (inches): 60, Horse Power: 53.4, Hours: 896, New: Used, Shippingheight (feet): 6, Shippinglength (feet): 10, Shippingweight (pounds): 2760, Shippingwidth (feet): 3
$48,500
514.3 miles away - ALBANY, NY
Cuttingdepth (inches): 14, Cuttingheight (inches): 24.5, Cuttingwidth (inches): 60, Horse Power: 53.4, Hours: 1407, New: Used, Shippingheight (feet): 6, Shippinglength (feet): 10, Shippingweight (pounds): 2760, Shippingwidth (feet): 3
$42,500
290.8 miles away - HAMBURG, NY
2021 Rayco RG55T with 55hp Gas Engine, Non-Marking Tracks, Hydraulic Backfill Blade, and Remote. This machine has 530 hours and is work ready. *Location and hours are subject to change.
$34,900
116.2 miles away - MAUMEE, OH
NEW RG37 4wd stump grinder, dual drive wheels, 37hp gas engine, Command Cut, swing out controls, backfill blade, shipping and financing available, trailer not included in price, territory restrictions may apply, call or e-mail for more information. RILEY MCCLURE 419-356-3226 RMCCLURE@AGPROCO.COM
$33,000
569.4 miles away - DES MOINES, IA
2019 RAYCO STUMP GRINDER RG55 Operators appreciate the large cutting dimensions as well as the visibility and protection of the swing-out control station. For travel through gates, the control station swings in line. Wide floatation tires and 4-wheel drive allow the RG55 to maintain traction in challenging conditions. GENERAL SPECS: • WEIGHT: 2,760 lb • LENGTH: 121.5" • MAXIMUM HEIGHT: 72.625" • WIDTH: 35.5" • ENGINE: Kubota • HORSEPOWER: 53.4 hp • FUEL TYPE: Gasoline • GROUND DRIVE: 4-Wheel Drive, 2-Speed • FUEL TANK: 8.5 gallons • SUPER TOOTH: 18 Total • CUTTER WHEEL: 20” x 1.5” • CUTTING DEPTH: 14” • CUTTING HEIGHT: 24.5” • CUTTING WIDTH: 60” Contact us today to learn more! STOCK #025665 FEATURED INVENTORY
$30,995
324.8 miles away - BATAVIA, NY
New 2023 Rayco RG37T with a 37hp Vanguard Gas Engine, Non-Marking Tracks, and Hydraulic Backfill Blade. This machine has 4 hours and is work ready. *Location and hours are subject to change.
$30,995
290.8 miles away - HAMBURG, NY
New 2023 Rayco RG37T with a 37hp Vanguard Gas Engine, Non-Marking Tracks, and Hydraulic Backfill Blade. This machine has 5 hours and is work ready. *Location and hours are subject to change.
$28,500
327.3 miles away - NASHVILLE, TN
Cuttingdepth (inches): 17.5, Cuttingheight (inches): 24.5, Cuttingwidth (inches): 51, Horse Power: 37, Hours: 587, New: New, Shippingweight (pounds): 1850
$25,500
419.6 miles away - EAST SYRACUSE, NY
2022 Rayco RG37T with a 37hp Vanguard Gas Engine, Non-Marking Tracks, and Hydraulic Backfill Blade. This machine has 420 hours and is work ready. *Locations and hours is subject to change.
Dealer Info
BOBCAT OF SYRACUSE (UPSTATE EQUIPMENT)
EAST SYRACUSE, NY
419.6 miles away
$23,900
290.8 miles away - HAMBURG, NY
2022 Rayco RG37T with a 37hp Vanguard Gas Engine, Non-Marking Tracks, and Hydraulic Backfill Blade. This machine has 555 hours and is work ready. *Location and hours is subject to change.
$17,500
311.4 miles away - LOCKPORT, NY
2020 Rayco RG37T self propelled stump grinder equipped with non marking/ track drive undercarriage, hydraulic backfill blade, 2 Speed Travel, and is powered by a 37hp Vanguard gas engine. This machine has 1,035 hours and is ready to work! *Location and hours are subject to change.
$6,850
218.6 miles away - LAPEER, MI
Rayco RG1625A Super Junior Stump Grinder, 25hp Twin Cylinder Gas Motor, Electric Start, Hyd. Drive And Steer, 18" Cutting Wheel, 25hp, Weighs 1300lbs, Showing 921 Hours On The Meter, Everything Works, Good Condition
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
121HP CUMMINS T4F DIESEL | 17.7" RUBBER TRACKS | HYDROSTAIC TRANSMISSION | REAR-MOUNTED 12K WINCH | ENCLOSED CAB W/ A/C AND HEAT | BACK-UP CAMERA | HEATED AIR RIDE SUSPENSION SEAT RAYCO PREDATOR MULCHER HEAD W/6' CUTTING WIDTH
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
121HP CUMMINS T4F DIESEL | 17.7" RUBBER TRACKS | HYDROSTAIC TRANSMISSION | REAR-MOUNTED 12K WINCH | ENCLOSED CAB W/ A/C AND HEAT | BACK-UP CAMERA | HEATED AIR RIDE SUSPENSION SEAT
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
121HP CUMMINS T4F DIESEL | 17.7" RUBBER TRACKS | HYDROSTAIC TRANSMISSION | REAR-MOUNTED 12K WINCH | ENCLOSED CAB W/ A/C AND HEAT | BACK-UP CAMERA | HEATED AIR RIDE SUSPENSION SEAT | PREDATOR MULCHER HEAD
Contact for Price
1058.9 miles away - ABILENE, TX
RAYCO C120 CARRIER STEEL TRACKS Kirby-Smith will have the machine cleaned, serviced and ready to work! As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
37HP GAS VANGUARD ENGINE | SLEWING RING PIVOT DESIGN INCREASES CUTTING WIDTH | FULL CUTTING DEPTH ACROSS ENTIRE WIDTH OF CUT | LOWER CENTER OF GRAVITY | WIDE TIRES FOR ENHANCED TRACTION | SWING-OUT OPERATOR STATION | HYDRAULIC BACKFILL BLADE
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
37HP GAS VANGUARD ENGINE | SLEWING RING PIVOT DESIGN INCREASES CUTTING WIDTH | FULL CUTTING DEPTH ACROSS ENTIRE WIDTH OF CUT | LOWER CENTER OF GRAVITY | WIDE TIRES FOR ENHANCED TRACTION | SWING-OUT OPERATOR STATION | HYDRAULIC BACKFILL BLADE
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
37HP GAS VANGUARD ENGINE | SLEWING RING PIVOT DESIGN INCREASES CUTTING WIDTH | FULL CUTTING DEPTH ACROSS ENTIRE WIDTH OF CUT | LOWER CENTER OF GRAVITY | WIDE TIRES FOR ENHANCED TRACTION | SWING-OUT OPERATOR STATION | HYDRAULIC BACKFILL BLADE
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
37HP GAS VANGUARD ENGINE | SLEWING RING PIVOT DESIGN INCREASES CUTTING WIDTH | FULL CUTTING DEPTH ACROSS ENTIRE WIDTH OF CUT | LOWER CENTER OF GRAVITY | WIDE TIRES FOR ENHANCED TRACTION | SWING-OUT OPERATOR STATION | HYDRAULIC BACKFILL BLADE
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
54HP KUBAOTA ENG | SELF-PROPELLED GROUND DRIVE W/ AUTO BRAKE | 4 WHEEL DRIVE W/ 2-SPEED | (4) 18"X8.5"-10" EXTRA GRIP THREAD TIRES | 34.5" WIDTH LENGTH | 20 DIAMETER X 1.5" THICK CUTTER WHEEL | 24 TOOTH CUTTING WHEEL | ELECTRIC CLUTCH |
Contact for Price
418.7 miles away - EAST SYRACUSE, NY
85 HP FORD | WIRELESS RRC | SELF PROPELLED W/ FULL TIME 4WD | (8) 5.70x22.4 TIRES | 23" DIAMETER x 1.5" WIDE CUTTER WHEEL | BACK FILL BLADE | 3,230 LB OPERATING WEIGHT
of 2
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.