$12,900
584.5 miles away - ROGERSVILLE, MO
$34,750
724.4 miles away - CHIEFLAND, FL
Call for more info 352-493-4121
$34,500
471.8 miles away - MILLEDGEVILLE, GA
NEW 2026 Kuhn GMD 4051 TL on the Lot!! 13 Ft Working Width 540 PTO 9 Disc Maximize the efficiency in your hay operation!! Located @ Ag-Pro Milledgeville, Ga. Contact me today 478-234-5948 or Email: PKeith@agproco.com Shipping and Financing is available!! We take trades!!
$31,500
799.4 miles away - BAINBRIDGE, GA
The Kuhn GMD 3551 TL is an 11.5 ft trailed disc mower designed for high-capacity, efficient, and low-maintenance mowing. It features a 540 RPM PTO, 8-disc cutterbar with gear-to-gear drive, and a Gyrodine swivel hitch for tight turns. Key benefits include the Fast-Fit® quick-release knife system, superior contour following with adjustable float, and a direct-drive design that eliminates belts. CALL AGPRO BAINBRIDGE FOR MORE INFO 2292464370
$29,995
700.1 miles away - FORT SMITH, AR
$29,500
630.9 miles away - CAIRO, GA
NEW Kuhn GMD 3151 TL trailed disc mower, 10'2" cut, Optidisc Elite blade bar, call or email for more information.
$29,500
724.4 miles away - CHIEFLAND, FL
Call for more info 352-493-4121
$28,900
594.2 miles away - ABBEVILLE, AL
less than 150 total acres call 334-655-3329
$25,000
633.2 miles away - THOMASVILLE, GA
13' working width, 9 discs with new cutter bar. Shipping and financing available. Questions or interest call Corey at 229-201-0302
$24,900
891.6 miles away - ATHENS, TX
For more information, contact Darrel Barnes at 903_391_0268.
$20,995
858.8 miles away - NORMAN, OK
$19,995
251.0 miles away - FISHERSVILLE, VA
GMD3151 TL DRAWBAR SWIVEL HITCH USED LOCATED IN FISHERSVILLE, VA 540-337-3057
$19,995
731.0 miles away - MUSKOGEE, OK
Good condition GMD 3151 TL. Ready to put in the field and get to work. Contact Drew with any questions at 918-682-3413
$19,900
502.1 miles away - MACON, MO
KUHN GMD 4050 TL SIDE PULL TRAILED ROTARY DISC MOWER, 13' working width, 9 cutting discs, turnbuckle cutter bar tilt control, 2 point swivel hitch, 540 PTO driven, pivoting gear box allows near 90 degree turns, opti-disc elite low profile cutter bar, requires minimum 60hp, 9.5L-15 flotation tires.
$16,400
114.2 miles away - FLEMINGSBURG, KY
$16,170
364.7 miles away - MCCONNELLS, SC
2023 Kuhn GMD Premium Series 280 Cut Clean, Cut with KUHN KUHN GMD Premium Series mounted disc mowers, with working widths from 7'10" to 10'2", offer increased durability, more features and simpler operation. The best-selling hay mowers in the world are renewed with the KUHN GMD Premium Series mounted disc mowers. Replacing the highly popular 100 Series HD machines, these mowers provide increased durability, enhanced features and a cleaner look for years of low maintenance hay production. The rugged 100 Series cutterbar provides a clean cut. Its flat angle helps keep dirt and other contaminants out of the crop while increasing knife life. A Fast-Fit® quick-change system can be installed to speed up knife changes. A more ergonomic, sleek design reduces clutter while simplifying operation. Cut clean, cut with KUHN. Features may include: Proven 100 Series Cutterbar * Due to the high reliability, excellent crop cutting, and overall adaptability to varying terrains, the 100 Series cutterbar is a staple in the Premium Series. See for yourself by taking a closer look at what the 100 Series cutterbar has to offer. * Withstands the highest loads: special high-capacity bearings fitted in a one-piece sealed housing are not subject to distortion. * Increased service life: disc pinion shaft bearings endure radial forces for maximum bearing life. This optimum position improves the load balance. * Protection should an obstacle be struck: the Protectadrive® system is designed to protect the cutterbar gear train and minimizes the risk of downtime. * High-wear resistance: knife attachment hardware is fully protected. For added safety, heat-treated steel cups are welded to the disc. * Minimum wear or distortion risks: idler gear fasteners are located in heat treated steel cups. Correct alignment is ensured without the risk of distortion. * Long-term reliability: large-diameter gearwheels in high-tensile forged steel with reinforced teeth.
$15,995
240.2 miles away - HARDINSBURG, KY
$12,650
114.2 miles away - FLEMINGSBURG, KY
$11,900
741.2 miles away - OCALA, FL
$8,500
462.3 miles away - CORINTH, MS
Local Trade, call Wade in Corinth (662)287-4494.
$4,275
718.6 miles away - POTEAU, OK
$1,800
594.2 miles away - ABBEVILLE, AL
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Working Width: 9 ft. 2 in. (2.8 m) Width: Average swath: 6 ft. 7 in. (2.0 m) Weight: Machine approx.: 1,475 lb. (669 kg)
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Contact for Price
272.5 miles away - BOWLING GREEN, KY
Contact for Price
272.5 miles away - BOWLING GREEN, KY
of 2
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.