$7,995
566.3 miles away - DES MOINES, IA
2018 Husqvarna® Construction S 36 Propane HEPA Dust Extractor Vacuum The S36 Propane is a very powerful propane HEPA dust extractor to match Husqvarna Soff-Cut 4000, Soff-Cut 2500, Soff-Cut 2000, Soff-Cut 150, as well as small to mid size electric, propane or other petrol grinders, shot blasters and shavers. This professional dust extractor is designed to meet strict demands. Equipped with two independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m2 of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning and air-flow manometer for filter control. The Longopac® bag hose system ensures simple, dust-free bag changes. Features: Efficient filtration system - The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested and certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm). Easy and efficient filter cleaning - The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy and efficient cleaning of the conical main filter without opening the machine. Durable design - Corrosion-resistant steel clamps, welded frame with dust bag platform and durable steel handle make it ready to serve for many years. For demanding industrial applications - For demanding industrial applications, where high suction and flow are required to eliminate airborne dust. Easy-to-read airflow monitoring - Alerts you when the filter needs to be cleaned or changed.
$7,995
566.3 miles away - DES MOINES, IA
2019 Husqvarna® Construction S36 Propane HEPA Dust Extractor Vacuum The S36 Propane is a very powerful propane HEPA dust extractor to match Husqvarna Soff-Cut 4000, Soff-Cut 2500, Soff-Cut 2000, Soff-Cut 150, as well as small to mid size electric, propane or other petrol grinders, shot blasters and shavers. This professional dust extractor is designed to meet strict demands. Equipped with two independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m2 of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning and air-flow manometer for filter control. The Longopac® bag hose system ensures simple, dust-free bag changes. Features: Efficient filtration system - The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested and certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm). Easy and efficient filter cleaning - The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy and efficient cleaning of the conical main filter without opening the machine. Durable design - Corrosion-resistant steel clamps, welded frame with dust bag platform and durable steel handle make it ready to serve for many years. For demanding industrial applications - For demanding industrial applications, where high suction and flow are required to eliminate airborne dust. Easy-to-read airflow monitoring - Alerts you when the filter needs to be cleaned or changed.
$6,695
566.3 miles away - DES MOINES, IA
2019 Husqvarna® Construction PG 510 Electric Floor Grinder/Polisher 220-240 V and single phase. The PG 510 is a planetary floor grinder with three grinding discs and a total grinding width of 515 mm. It is suitable for removing coatings, grinding and polishing concrete, etc. The grinding head on the PG 510 is effectively sealed to keep dust and moisture out. This greatly extends the lifetime of the bearings and belts. The PG 510 is ideal as a rental machine and suitable for both professional and semi-professional work. Quick-release couplings allow the grinding head to be separated from the chassis which can then be easily folded for transport. The grinder also has a digital hour meter.
$5,959
472.5 miles away - CEDAR RAPIDS, IA
2025 Husqvarna® Construction DMS 400 Core Drill (Stand Model) Comes with DM 400 core drill motor and stand with pump and vacuum. DM 400 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed. Recommended diameter 55-350 mm. With aluminum motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need to cut close to corners. Features may include: Sturdy and durable Equipped with an aluminum housing and the protective carrying handle ensures rough handling. Optimized RPM's Enables high drilling performance. Ergonomic Equipped with a carrying handle for easy transport and handling. Embedded Connectivity An enhanced version of Husqvarna Fleet Services™. Enables data analytics and insights into the health of the machine. Quick connection Enables ease of connection to a drill stand. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Easy start with reduced speed Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration. Horizontal drilling Drilling horizontally. Water evacuation Drilling for water evacuation. Quick-release washer Enables easy dispatch of drill core bits. Elgard™ The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life. Angle drilling Drilling holes in stepless adjustable angles.
$5,149
472.5 miles away - CEDAR RAPIDS, IA
2021 Husqvarna® Construction DMS 400 Core Drill (Stand Model) Comes with DM 400 core drill motor and stand with pump and vacuum. DM 400 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed. Recommended diameter 55-350 mm. With aluminum motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need to cut close to corners. Features may include: Sturdy and durable Equipped with an aluminum housing and the protective carrying handle ensures rough handling. Optimized RPM's Enables high drilling performance. Ergonomic Equipped with a carrying handle for easy transport and handling. Embedded Connectivity An enhanced version of Husqvarna Fleet Services™. Enables data analytics and insights into the health of the machine. Quick connection Enables ease of connection to a drill stand. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Easy start with reduced speed Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration. Horizontal drilling Drilling horizontally. Water evacuation Drilling for water evacuation. Quick-release washer Enables easy dispatch of drill core bits. Elgard™ The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life. Angle drilling Drilling holes in stepless adjustable angles.
$4,788
569.3 miles away - AMES, IA
2020 Husqvarna® Construction S 36 230V HEPA Dust Extractor Vacuum Single-phase, 230V, 345CFM, Wand Hose. The Husqvarna S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes. Features: Efficient filtration system - The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested and certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm). Easy and efficient filter cleaning - The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy and efficient cleaning of the conical main filter without opening the machine. Durable design - Corrosion-resistant steel clamps, welded frame with dust bag platform and durable steel handle make it ready to serve for many years. Easy to transport - The welded frame enables easy transportation by resting the machine on the frame.
$4,584
566.3 miles away - DES MOINES, IA
2021 Husqvarna® Construction DMS 400 Core Drill (Stand Model) Comes with DM 400 core drill motor and stand with pump and vacuum. DM 400 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed. Recommended diameter 55-350 mm. With aluminum motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need to cut close to corners. Features may include: Sturdy and durable Equipped with an aluminum housing and the protective carrying handle ensures rough handling. Optimized RPM's Enables high drilling performance. Ergonomic Equipped with a carrying handle for easy transport and handling. Embedded Connectivity An enhanced version of Husqvarna Fleet Services™. Enables data analytics and insights into the health of the machine. Quick connection Enables ease of connection to a drill stand. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Easy start with reduced speed Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration. Horizontal drilling Drilling horizontally. Water evacuation Drilling for water evacuation. Quick-release washer Enables easy dispatch of drill core bits. Elgard™ The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life. Angle drilling Drilling holes in stepless adjustable angles.
$4,295
569.3 miles away - AMES, IA
2023 Husqvarna® Construction DMS 400 Core Drill (Stand Model) Comes with DM 400 core drill motor and stand with pump and vacuum. DM 400 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed. Recommended diameter 55-350 mm. With aluminum motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need to cut close to corners. Features may include: Sturdy and durable Equipped with an aluminum housing and the protective carrying handle ensures rough handling. Optimized RPM's Enables high drilling performance. Ergonomic Equipped with a carrying handle for easy transport and handling. Embedded Connectivity An enhanced version of Husqvarna Fleet Services™. Enables data analytics and insights into the health of the machine. Quick connection Enables ease of connection to a drill stand. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Easy start with reduced speed Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration. Horizontal drilling Drilling horizontally. Water evacuation Drilling for water evacuation. Quick-release washer Enables easy dispatch of drill core bits. Elgard™ The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life. Angle drilling Drilling holes in stepless adjustable angles.
$4,272
472.5 miles away - CEDAR RAPIDS, IA
2025 Husqvarna DM 1 PACE Core Drill with Stand, B750 PACE Battery & Charger The 2025 Husqvarna DM 1 PACE is a high-performance battery-powered core drill designed for precision, mobility, and productivity. Paired with the sturdy drill stand, B750 PACE battery, and rapid charger, this package delivers cordless convenience without sacrificing power—ideal for construction and renovation projects. Built for demanding drilling applications in concrete, reinforced concrete, and other masonry materials, the DM 1 PACE offers smooth operation, exceptional control, and Husqvarna’s proven reliability. Key Specs: Power Source: Husqvarna PACE Battery System Included Battery: B750 PACE (750 Wh capacity) Included Charger: Husqvarna PACE Fast Charger Mounting: Includes Husqvarna core drill stand Application: Wet and dry core drilling Features: Zero-emission, cordless design for indoor or enclosed space use Compatible with Husqvarna’s full range of PACE batteries Fast setup with secure, stable drill stand for accurate coring Designed for operator comfort with low vibration and noise levels Durable construction for heavy-duty jobsite performance Portable, powerful, and ready to work. Contact us today for pricing and availability
$3,995
566.3 miles away - DES MOINES, IA
2018 Husqvarna® Construction S 36 230V HEPA Dust Extractor Vacuum Single-phase, 230V, 345CFM, Wand Hose. The Husqvarna S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes. Features: Efficient filtration system - The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested and certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm). Easy and efficient filter cleaning - The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy and efficient cleaning of the conical main filter without opening the machine. Durable design - Corrosion-resistant steel clamps, welded frame with dust bag platform and durable steel handle make it ready to serve for many years. Easy to transport - The welded frame enables easy transportation by resting the machine on the frame
$3,595
569.3 miles away - AMES, IA
2019 Husqvarna® Construction S 36 230V HEPA Dust Extractor Vacuum Single-phase, 230V, 345CFM, Wand Hose. The Husqvarna S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes. Features: Efficient filtration system - The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested and certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm). Easy and efficient filter cleaning - The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy and efficient cleaning of the conical main filter without opening the machine. Durable design - Corrosion-resistant steel clamps, welded frame with dust bag platform and durable steel handle make it ready to serve for many years. Easy to transport - The welded frame enables easy transportation by resting the machine on the frame.
$3,495
472.5 miles away - CEDAR RAPIDS, IA
2025 Husqvarna DM 540i Battery Powered Core Drill Kit Kit Includes: DM 540i Core Drill (2) BLi300 Batteries QC500 Fast Charger Durable Carry Case Specifications: 3" Max Drill Bit Capacity (4" with Drill Stand) Powered by 1.88 HP BLi8-X Eco Battery System 2-Speed Gearbox for Versatile Drilling Lightweight Design – Only 10.8 lbs The 2025 Husqvarna DM 540i is a powerful, cordless core drill designed for professionals needing high performance and maximum mobility. With a 3" max bit capacity (4" when used with a stand), this compact drill is ideal for indoor and tight-space drilling. Built on the BLi8-X Eco battery platform, it delivers consistent power with lower noise and zero emissions—making it suitable for demanding jobsite conditions, especially in enclosed environments. The dual-speed gearbox allows efficient drilling in various materials, while its lightweight 10.8 lb design reduces operator fatigue. Includes everything you need to drill right out of the box. Contact us today for pricing and availability!
$3,328
472.5 miles away - CEDAR RAPIDS, IA
2025 Husqvarna DMS 240 Core Drill Key Specs: Motor: 2.9 hp, 115V Includes Stand, Vacuum, and Pump Capable of handling up to a 10" drill bit Designed for precision coring in concrete and masonry All standard equipment included The 2025 Husqvarna DMS 240 Core Drill is a versatile and reliable system for contractors requiring precise drilling in concrete and masonry. Equipped with a stand, vacuum, and pump, it provides stability, dust control, and ease of operation. Capable of handling drill bits up to 10", the DMS 240 is built for both efficiency and accuracy on demanding job sites. Contact us today for availability in Des Moines, Cedar Rapids, Waterloo, and Ames, Iowa!
$2,795
566.3 miles away - DES MOINES, IA
2023 Husqvarna® Construction MS 360 Masonry Table Saw The MS 360 saw offers precision like no other and has an exceptional cutting depth up to 5'' deep for a standard 14'' blade. The sturdy and rigid design makes it suitable for large jobs cutting block, brick or pavers. The MS 360 rotates for 22.5 degree and 45 degree bevel cuts and switches easily between plunge and miter cutting which makes is fast and versatile on the job site. The patented water containment system facilitates clean work area. Stand is sold separately. Features may include: CLEAN WORK AREA The patented water containment system enables to adjust and optimize the use of water while cutting. The double water spray splash guard reduces the need for cleaning. ERGONOMIC AND LOW VIBRATIONS Integrated telescope carry handles and light weigh facilitates easy movement. Plunge handle ensures low vibrations for the operator. HIGH PERFORMANCE Rotates 22.5 degee and 45 degree bevel cuts and can easily switch between plunge and mitre cutting which makes is fast and versitile on the job site.
$2,695
566.3 miles away - DES MOINES, IA
2022 Husqvarna® Construction K1 PACE 14" 14" Battery Power Cutter Package includes K1 Pace power cutter, 2 batteries, 1 charger, and a 14" diamond blade. K1 PACE high power battery cutter has the power and performance you expect from equivalent petrol-powered cutters. Equipped with X-Halt™ brake function for operational safety. Ergonomic and user-friendly with low vibrations, optimally balanced machine and zero direct emissions. With built-in connectivity so you can easily monitor machine location, runtime, service intervals and receive wireless updates through FOTA (firmware over the air). Powered by Husqvarna PACE battery system with high power and fast charging for impressive productivity and a well-suited match with our specially designed battery blade range for maximized cutting depth and optimized performance. Suitable for concrete pipes, concrete garden plates, cinder blocks etc. Features may include: POWERFUL Power and performance in par with equivalent petrol-powered cutters. With an integrated gearbox for higher torque. For high productivity. SAFE OPERATION X-Halt™ blade brake function capable of stopping the rotation of the blade in fractions of a second. ZERO DIRECT EMISSION Possible to easily cut indoors, in sensitive areas or urban areas where emission levels might be regulated. RED DOT AWARD This product is the recipient of a Red Dot award for high design quality. FLEXIBLE Versatile and flexible cutting indoors and outdoors. Integrated wet cutting system or VAC attachment as an accessory for dry cutting enables efficient and flexible dust control. ERGONOMIC AND USER-FRIENDLY Exceptionally low vibrations, zero direct emission and silent motor sound enables a more pleasurable work environment. HIGH POWER PACE BATTERY SYSTEM Enables quick charging, high power and performance which maximizes your efficiency and productivity. A MORE SUSTAINABLE CHOICE An excellent alternative when work environments require zero direct emission in use. It contributes to significantly lower CO2 emission than a fossil fuel equivalent and in terms of climate impact across its lifecycle.* *) Based on a cradle-to-grave Life Cycle Assessment, LCA, conducted in accordance with ISO 14040 and ISO 14044 and independently verified. BUILT-IN CONNECTIVITY Enables effortless onboarding and asset management in Husqvarna Fleet Services™ where you easily monitor location, runtime, service intervals and receive wireless updates. SMART BATTERY PLACEMENT The side-fed battery placement maximizes cooling and minimize slurry and dust containment.
$2,595
569.3 miles away - AMES, IA
2020 Husqvarna® Construction DMS 280 LS Core Drill (Stand Model) Unit comes with anchor base, vacuum, and pump. The DMS 280 is a complete core drilling system for a variety of drilling applications. The system drills reinforced concrete, bricks, and other building material up to 16" in diameter. The stand is tiltable for angle drilling, and features a convenient carry handle. Bit sold separately. Features may include: Angle drilling Drilling holes in stepless adjustable angles. Channels, pipes and cables Drilling ventilation channels and holes for pipes and cables. Barriers Drilling for installation of stair rails, fences, etc. Stitch drilling Drilling multiple holes next to each other to make openings. Water evacuation Drilling for water evacuation. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Reliable gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
$2,595
569.3 miles away - AMES, IA
2021 Husqvarna® Construction DMS 400 Core Drill (Stand Model) Comes with DM 400 core drill motor and stand with pump and vacuum. DM 400 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed. Recommended diameter 55-350 mm. With aluminum motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need to cut close to corners. Features may include: Sturdy and durable Equipped with an aluminum housing and the protective carrying handle ensures rough handling. Optimized RPM's Enables high drilling performance. Ergonomic Equipped with a carrying handle for easy transport and handling. Embedded Connectivity An enhanced version of Husqvarna Fleet Services™. Enables data analytics and insights into the health of the machine. Quick connection Enables ease of connection to a drill stand. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Easy start with reduced speed Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration. Horizontal drilling Drilling horizontally. Water evacuation Drilling for water evacuation. Quick-release washer Enables easy dispatch of drill core bits. Elgard™ The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life. Angle drilling Drilling holes in stepless adjustable angles.
$2,595
472.5 miles away - CEDAR RAPIDS, IA
2016 Husqvarna® Construction MS355G Masonry Table Saw Portable masonry table saw with a 5hp gas engine and 5" cutting depth. Perfect for cutting brick, block, pavers, and more. Benefits: Wider opening in back allows larger material to pass through. Saw head comes preassembled to frame to ensure quick set-up. A 4.8 hp Honda gas engine provides high power and long life. Quickly change between plunge cutting or locking the head down for efficient cutting with the rolling cart. Sta-level® blade guard keeps the blade guard parallel to the cutting table for accurate cuts. The side handles make moving the saw easier.
$2,438
472.5 miles away - CEDAR RAPIDS, IA
2022 Husqvarna® K760 Cut-n-Break The K 760 Cut-n-Break is the ideal solution for deep, precise cuts without overcutting corners. Using two high-speed blades, it creates a core in the saw cut that can easily be broken off with the included breaking tool. This cost-efficient method allows you to cut up to 16" deep from one side, minimizing diamond tool and maintenance costs. Features & Benefits: Cost-efficient cutting method: Cut step-by-step at a low tool cost. Exceptional cutting depth: Up to 16" with twin cutting blades. High performing blades included: Stable core and excellent cutting performance. Optimized engine performance: Efficient cylinder design, digital ignition, and X-Torq® engine technology. Easy to start: Air purge, decompression valve, and optimized carburetor design. Lower emissions and fuel consumption with X-Torq® technology. DuraStarter™: Virtually maintenance-free, dust-sealed starter. Wet cutting kit: Efficient dust management with water adjustment. Adjustable for openings: Ideal for minor window and door adjustments. Deep and irregular cutting capability. Light and powerful: Superior power-to-weight ratio for ease of use. Blade retarder: Reduces blade stop time for faster workflow. Active Air Filtration™: Two-step system prolongs product life and service intervals. Anti-vibration system: Reduces operator strain with ergonomically designed handles. Grooves: Cuts expansion joints and crack repair grooves. SmartCarb™: Automatic filter compensation maintains power and lowers fuel consumption. Contact us today for availability in Des Moines, Cedar Rapids, Waterloo, and Ames, Iowa!
$2,395
566.3 miles away - DES MOINES, IA
2019 Husqvarna® Construction DMS 340 LS Core Drill (Stand Model) The Husqvarna DMS 340 LS is a core drill (stand model) with anchor base, vacuum plate, and pump. About the Husqvarna DMS 340- an all-around drill stand and motor combination that can handle a variety of drilling applications. It can be easily and quickly disassembled for transportation.
$2,395
472.5 miles away - CEDAR RAPIDS, IA
2024 Husqvarna® Construction K1 PACE 14" 14" Battery Power Cutter Package includes K1 Pace power cutter, 2 B380X batteries, 1 charger, and a 14" diamond blade. K1 PACE high power battery cutter has the power and performance you expect from equivalent petrol-powered cutters. Equipped with X-Halt™ brake function for operational safety. Ergonomic and user-friendly with low vibrations, optimally balanced machine and zero direct emissions. With built-in connectivity so you can easily monitor machine location, runtime, service intervals and receive wireless updates through FOTA (firmware over the air). Powered by Husqvarna PACE battery system with high power and fast charging for impressive productivity and a well-suited match with our specially designed battery blade range for maximized cutting depth and optimized performance. Suitable for concrete pipes, concrete garden plates, cinder blocks etc. Features may include: POWERFUL Power and performance in par with equivalent petrol-powered cutters. With an integrated gearbox for higher torque. For high productivity. SAFE OPERATION X-Halt™ blade brake function capable of stopping the rotation of the blade in fractions of a second. ZERO DIRECT EMISSION Possible to easily cut indoors, in sensitive areas or urban areas where emission levels might be regulated. RED DOT AWARD This product is the recipient of a Red Dot award for high design quality. FLEXIBLE Versatile and flexible cutting indoors and outdoors. Integrated wet cutting system or VAC attachment as an accessory for dry cutting enables efficient and flexible dust control. ERGONOMIC AND USER-FRIENDLY Exceptionally low vibrations, zero direct emission and silent motor sound enables a more pleasurable work environment. HIGH POWER PACE BATTERY SYSTEM Enables quick charging, high power and performance which maximizes your efficiency and productivity. A MORE SUSTAINABLE CHOICE An excellent alternative when work environments require zero direct emission in use. It contributes to significantly lower CO2 emission than a fossil fuel equivalent and in terms of climate impact across its lifecycle.* *) Based on a cradle-to-grave Life Cycle Assessment, LCA, conducted in accordance with ISO 14040 and ISO 14044 and independently verified. BUILT-IN CONNECTIVITY Enables effortless onboarding and asset management in Husqvarna Fleet Services™ where you easily monitor location, runtime, service intervals and receive wireless updates. SMART BATTERY PLACEMENT The side-fed battery placement maximizes cooling and minimize slurry and dust containment.
$2,395
569.3 miles away - AMES, IA
2025 Husqvarna K1PACE 14" Battery Power Cutter Package includes K1 PACE power cutter, two B380X batteries and charger. The K1 PACE high-power battery cutter delivers the performance you expect from petrol-powered cutters with zero direct emissions. Equipped with X-Halt™ blade brake for safety, ergonomic design, low vibrations, and built-in connectivity for monitoring location, runtime, service intervals, and wireless updates via FOTA. Powered by the Husqvarna PACE battery system for high power and fast charging, paired with Husqvarna battery blades for optimized cutting depth and performance. Ideal for concrete pipes, garden plates, cinder blocks, and more. Features may include: POWERFUL - Equivalent performance to petrol-powered cutters with integrated gearbox for higher torque and productivity. SAFE OPERATION - X-Halt™ blade brake stops blade rotation in fractions of a second for maximum safety. ZERO DIRECT EMISSION - Safe for indoor use and sensitive or regulated areas with zero direct emissions. RED DOT AWARD - Recipient of Red Dot award for high design quality. FLEXIBLE - Versatile cutting indoors and outdoors. Optional integrated wet cutting or VAC attachment for efficient dust control. ERGONOMIC AND USER-FRIENDLY - Low vibrations, silent motor, and zero direct emissions for a more comfortable work environment. HIGH POWER PACE BATTERY SYSTEM - Quick charging with high power and performance for maximum efficiency and productivity. A MORE SUSTAINABLE CHOICE - Significantly lower CO2 emissions compared to fossil fuel equivalents, based on cradle-to-grave LCA conducted per ISO 14040/14044. BUILT-IN CONNECTIVITY - Monitor location, runtime, service intervals, and receive wireless updates via Husqvarna Fleet Services™. SMART BATTERY PLACEMENT - Side-fed battery design maximizes cooling and minimizes slurry and dust exposure. Contact us today for availability in Des Moines, Cedar Rapids, Waterloo, and Ames, Iowa!
$2,395
569.3 miles away - AMES, IA
2022 Husqvarna® Construction K1 PACE 14" 14" Battery Power Cutter Package includes K1 Pace power cutter, 2 B380X batteries, 1 charger, and a 14" diamond blade. K1 PACE high power battery cutter has the power and performance you expect from equivalent petrol-powered cutters. Equipped with X-Halt™ brake function for operational safety. Ergonomic and user-friendly with low vibrations, optimally balanced machine and zero direct emissions. With built-in connectivity so you can easily monitor machine location, runtime, service intervals and receive wireless updates through FOTA (firmware over the air). Powered by Husqvarna PACE battery system with high power and fast charging for impressive productivity and a well-suited match with our specially designed battery blade range for maximized cutting depth and optimized performance. Suitable for concrete pipes, concrete garden plates, cinder blocks etc. Features may include: POWERFUL Power and performance in par with equivalent petrol-powered cutters. With an integrated gearbox for higher torque. For high productivity. SAFE OPERATION X-Halt™ blade brake function capable of stopping the rotation of the blade in fractions of a second. ZERO DIRECT EMISSION Possible to easily cut indoors, in sensitive areas or urban areas where emission levels might be regulated. RED DOT AWARD This product is the recipient of a Red Dot award for high design quality. FLEXIBLE Versatile and flexible cutting indoors and outdoors. Integrated wet cutting system or VAC attachment as an accessory for dry cutting enables efficient and flexible dust control. ERGONOMIC AND USER-FRIENDLY Exceptionally low vibrations, zero direct emission and silent motor sound enables a more pleasurable work environment. HIGH POWER PACE BATTERY SYSTEM Enables quick charging, high power and performance which maximizes your efficiency and productivity. A MORE SUSTAINABLE CHOICE An excellent alternative when work environments require zero direct emission in use. It contributes to significantly lower CO2 emission than a fossil fuel equivalent and in terms of climate impact across its lifecycle.* *) Based on a cradle-to-grave Life Cycle Assessment, LCA, conducted in accordance with ISO 14040 and ISO 14044 and independently verified. BUILT-IN CONNECTIVITY Enables effortless onboarding and asset management in Husqvarna Fleet Services™ where you easily monitor location, runtime, service intervals and receive wireless updates. SMART BATTERY PLACEMENT The side-fed battery placement maximizes cooling and minimize slurry and dust containment.
$2,200
353.6 miles away - SHEBOYGAN, WI
$2,195
566.3 miles away - DES MOINES, IA
2024 Husqvarna® Construction K760 Cut-N-Break Cut-n-Break Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool. Want to take a closer look? Learn more about the product in depth by exploring its features and benefits. Cost-efficient cutting method - With the unique cut-n-break method you can work your way through the material step-by step at a low tool cost. Exceptional cutting depth - The long body and double cutting blades allow you to make cuts up to 16" deep. High performing blades includedTwin blades, with a very stable core and cutting performance are delivered with the machine. Optimized engine performance - Optimized engine performance through efficient cylinder design, digital ignition system and X-Torq® engine technology. Easy to start - The unique design of the carburetor, cylinder and digital ignition system, together with air purge and decompression valve, ensure an easy start. Less emissions and fuel consumption - Our X-Torq® engine produces less emissions, has lower fuel consumption and results in more power. DuraStarter™ - Our virtually maintenance free starter, thanks to the dust-sealed starter and the durable starter cord. Wet cutting kit - The water adjustment gives efficient dust management and makes operation easier and more efficient. Adjustment to openings - Cutting for minor adjustments to window and door openings. Deep cutting - Irregular deep cutting. Light and powerful - A light, compact and powerful machine with superior power-to-weight ratio. Blade retarder - Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job. Active Air Filtration™ - Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals. Anti-vibration system - Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To provide the user a comfortable operating position reduced strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control. Burying of cables - Burying of all kinds of cables. Grooves - Cutting grooves for expansion joints and crack repair. High power with less fuel - Our built-in automatic filter compensation SmartCarb™ maintains high power and lowers fuel consumption. Maintenance-free starter - Patented, dust sealed starter unit with a sealed return spring and pulley bearing. DuraStarter™ also includes a starter cord with greatly increased durability. This makes the starter virtually maintenance free, further enhancing the reliability of our cutters. SmartCarb™ - Our built-in automatic filter compensation maintains high power during the air filter life time.
$2,087
472.5 miles away - CEDAR RAPIDS, IA
2022 Husqvarna Construction K760 Cut-N-Break Cut-N-Break Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool. Features may include: Want to take a closer look? Learn more about the product in depth by exploring its features and benefits. Cost-efficient cutting method With the unique cut-n-break method you can work your way through the material step-by step at a low tool cost. Exceptional cutting depth The long body and double cutting blades allow you to make cuts up to 16" deep. High performing blades included Twin blades, with a very stable core and cutting performance are delivered with the machine. Optimized engine performance Optimized engine performance through efficient cylinder design, digital ignition system and X-Torq® engine technology. Easy to start The unique design of the carburetor, cylinder and digital ignition system, together with air purge and decompression valve, ensure an easy start. Less emissions and fuel consumption Our X-Torq® engine produces less emissions, has lower fuel consumption and results in more power. DuraStarter™ Our virtually maintenance free starter, thanks to the dust-sealed starter and the durable starter cord. Wet cutting kit The water adjustment gives efficient dust management and makes operation easier and more efficient. Adjustment to openings Cutting for minor adjustments to window and door openings. Deep cutting Irregular deep cutting. Light and powerful A light, compact and powerful machine with superior power-to-weight ratio. Blade retarder Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job. Active Air Filtration™ Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals. Anti-vibration system Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To provide the user a comfortable operating position reduced strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control. Burying of cables Burying of all kinds of cables. Grooves Cutting grooves for expansion joints and crack repair. High power with less fuel Our built-in automatic filter compensation SmartCarb™ maintains high power and lowers fuel consumption. Maintenance-free starter Patented, dust sealed starter unit with a sealed return spring and pulley bearing. DuraStarter™ also includes a starter cord with greatly increased durability. This makes the starter virtually maintenance free, further enhancing the reliability of our cutters. SmartCarb™ Our built-in automatic filter compensation maintains high power during the air filter life time.
$1,995
472.5 miles away - CEDAR RAPIDS, IA
2024 Husqvarna Construction DM 230 Core Drill - Handheld Handheld electric core drill with attractive design and functional ergonomics. The motor is designed with an ergonomic pistol grip giving you greater control. Handheld core drilling up to 4 in. or drilling with stand up to 6 in. Suitable for light applications such as ventilation, plumbing pipes and electrical sockets. DM 230 is an excellent choice for professionals as well as less experienced users.
$1,995
566.3 miles away - DES MOINES, IA
2019 Husqvarna Construction DMS 280 LS Core Drill (Stand Model) Unit comes with anchor base, vacuum, and pump. The DMS 280 is a complete core drilling system for a variety of drilling applications. The system drills reinforced concrete, bricks, and other building material up to 16" in diameter. The stand is tiltable for angle drilling, and features a convenient carry handle. Bit sold separately. Features may include: Angle drilling Drilling holes in stepless adjustable angles. Channels, pipes and cables Drilling ventilation channels and holes for pipes and cables. Barriers Drilling for installation of stair rails, fences, etc. Stitch drilling Drilling multiple holes next to each other to make openings. Water evacuation Drilling for water evacuation. Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance. Reliable gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
$1,995
569.3 miles away - AMES, IA
2022 Husqvarna® Construction K1270 16" 16" Power Cutter Some jobs require exceptional power. The K 1270 is a real powerhouse with an impressive 5,8 kW output, turning your heaviest cutting jobs into a fast and effective operation. Suitable for road works when used with the corresponding KV 9/12 trolley. The trolley also means you can fully concentrate on the cutting job. Features may include: EASY TO START The unique design of the carburetor, cylinder and digital ignition system, together with air purge and decompression valve, ensure an easy start. ANTI-VIBRATION SYSTEM Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To provide the user a comfortable operating position reduced strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control. SUPERIOR POWER WITH LOW EMISSIONS Patented X-torqTM engine that uses air to flush out the cylinder provides exceptional power but keeps fuel consumptions and emissions low. MAGNESIUM BLADE GUARD Contributes to a light weight which gives an improved power-to-weight ratio. New stepless adjustment makes it easier to change cutting position. REDUCED WEAR Reduced wear thanks to the drive belt with fully sealed transmission, which keeps out the cutting dust. CUTS CLOSE TO WALLS OR GROUND The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed transmission. This keeps out cutting dust etc, reducing wear. MAINTENANCE-FREE AIR FILTER The only time the filter needs to be checked and changed is if you experience lack of power. REVERSIBLE CUTTING ARM The drive belt with fully sealed transmission keeps out cutting dust for reduced wear and allows close cutting to walls and floor. SMOOTH BLADE STOP Reduces the stop time of the blade when the machine is switched off, which enables you to
$1,995
569.3 miles away - AMES, IA
2023 Husqvarna® Construction K760 Cut-N-Break Cut-N-Break Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool. Features may include: Want to take a closer look? Learn more about the product in depth by exploring its features and benefits. Cost-efficient cutting method With the unique cut-n-break method you can work your way through the material step-by step at a low tool cost. Exceptional cutting depth The long body and double cutting blades allow you to make cuts up to 16" deep. High performing blades included Twin blades, with a very stable core and cutting performance are delivered with the machine. Optimized engine performance Optimized engine performance through efficient cylinder design, digital ignition system and X-Torq® engine technology. Easy to start The unique design of the carburetor, cylinder and digital ignition system, together with air purge and decompression valve, ensure an easy start. Less emissions and fuel consumption Our X-Torq® engine produces less emissions, has lower fuel consumption and results in more power. DuraStarter™ Our virtually maintenance free starter, thanks to the dust-sealed starter and the durable starter cord. Wet cutting kit The water adjustment gives efficient dust management and makes operation easier and more efficient. Adjustment to openings Cutting for minor adjustments to window and door openings. Deep cutting Irregular deep cutting. Light and powerful A light, compact and powerful machine with superior power-to-weight ratio. Blade retarder Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job. Active Air Filtration™ Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals. Anti-vibration system Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To provide the user a comfortable operating position reduced strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control. Burying of cables Burying of all kinds of cables. Grooves Cutting grooves for expansion joints and crack repair. High power with less fuel Our built-in automatic filter compensation SmartCarb™ maintains high power and lowers fuel consumption. Maintenance-free starter Patented, dust sealed starter unit with a sealed return spring and pulley bearing. DuraStarter™ also includes a starter cord with greatly increased durability. This makes the starter virtually maintenance free, further enhancing the reliability of our cutters. SmartCarb™ Our built-in automatic filter compensation maintains high power during the air filter life time.
of 6
Filter by State
Close
Thank You!
Your message has been sent.
Your text message has been sent; please check your phone for responses. * carrier charges may apply.
Get one step closer to purchasing with no money down financing
(866) 234-2888
Want to watch for similar listings?
Add this make and model to Equipment Hunter to receive notifications when new or similar equipment is posted.